码迷,mamicode.com
首页 >  
搜索关键字:local-user vty authentication    ( 1762个结果
passwordauthentication yes
ssh ipdisconnected:no supported authentication methods available(server sent:publickey,gssapi-keyex,gssapi-with-mic)/etc/ssh/sshd_configPasswordAuthen...
分类:其他好文   时间:2015-01-19 23:23:08    阅读次数:280
TELNET及默认路由实验
一:TELNET及默认路由实验以AR5路由器配置为例:(华为的设备有时配置local-user的privilege权限为1时,设置super密码才会生效,此情况依版本而定)华为交换机特权密码怎么设置?问:交换机用其中一个用户名telnet进入设备后输入用户名密码后用sys可以直接进入根本不用特权密码..
分类:Web程序   时间:2015-01-19 06:58:53    阅读次数:225
修改win7登录界面
只需两步,教你将喜欢的图片在设置成开机画面。 第一步,打开注册表,Win+R->运行->Regedit。依次展开,HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\Backgroun...
分类:Windows程序   时间:2015-01-15 23:36:37    阅读次数:282
linux limits.conf 配置
limits.conf 文件实际是 Linux PAM(插入式认证模块,Pluggable Authentication Modules)中 pam_limits.so 的配置文件,而且只针对于单个会话。limits.conf的格式如下: username|@groupname type reso....
分类:系统相关   时间:2015-01-15 18:07:32    阅读次数:200
路由器,交换机的远程管理
实验拓扑图:步骤:一,为各PC配置IP地址二,在交换机SW1配置管理IP地址三,在SW1上配置VTY密码路由器R1同上配置四,PC登录SW2需要配置网关,其他配置同SW1一样五,使用PC机远程登录交换机和路由器登录SW1:登录R1:登录SW2:六,使用TFTP软件备份交换机和路由器的配置文件SW1..
分类:其他好文   时间:2015-01-14 01:06:18    阅读次数:296
CCNA2.0笔记_安全管理设备
设备安全配置Console密码Switch(config)#line console 0Switch(config-line)#loginSwitch(config-line)#password cisco配置vty线路密码Switch(config)#line vty 0 4Switch(conf...
分类:其他好文   时间:2015-01-13 23:02:29    阅读次数:197
交换文件
AuthPuppy Authentication ServerConfigure auth serverInstalled version : 1.0.0 stableCheck for newer versionGo to install pageSite nameName of this sit...
分类:其他好文   时间:2015-01-12 17:20:05    阅读次数:162
hive0.11 hiveserver custom认证bug
最近在测试hive0.11hiveserver时遇到的一个关于认证的bug,具体表现:在配置中指定了custom的认证方式时,通过beeline连接hiveserver2,发现连接hang祝hive配置:<property> <name>hive.server2.authentication</name>a <value>CUSTOM</value> &l..
分类:其他好文   时间:2015-01-12 06:57:09    阅读次数:420
一篇关于介绍php的几个user 认证相关的几个包
http://kodeinfo.com/post/laravel-authentication-packagesLARAVEL AUTHENTICATION PACKAGESByImran IqbalInAuthentication,Packages-September 3,2014-Comment...
分类:Web程序   时间:2015-01-10 22:17:37    阅读次数:214
linux使用su切换用户提示 Authentication failure的解决方法& 复制文件时,报cp: omitting directory `XXX'
linux使用su切换用户提示 Authentication failure的解决方法:这个问题产生的原因是由于ubtun系统默认是没有激活root用户的,需要我们手工进行操作,在命令行界面下,或者在终端中输入如下命令:sudo passwdPassword:你当前的密码Enter new UNIX...
分类:系统相关   时间:2015-01-06 09:43:28    阅读次数:282
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!