NFS:NFS(Network File System)即网络文件系统,是FreeBSD支持的文件系统中的一种,它允许网络中的计算机之间通过TCP/IP网络共享资源。在NFS的应用中,本地NFS的客户端应用可以透明地读写位于远端NFS服务器上的文件,就像访问本地文件一样。
环境:centos 6.5
一、服务器端配置:
安装 NFS 服务器所需的软件包: nfs-utils和rpcb...
分类:
系统相关 时间:
2015-05-28 12:40:06
阅读次数:
191
一、NFSNFS是NetworkFileSystem的缩写,即网络文件系统。NFS服务器安装1、NFS服务器主要的软件是rpcbind(rhel5中的版本叫portmap)和nfs-utilsrpcbind:是RPC主程序,负责NFS端口的监听。nfs-utils:是NFS主程序我们只有通过yum或者RPM来安装就可以2、启动NFS[root@web~]#serv..
分类:
系统相关 时间:
2015-05-25 14:50:23
阅读次数:
261
1. 安装nfs-utils和rpcbindyum install nfs-utils rpcbind2.设置开机启动服务chkconfig nfs onchkconfig rpcbind on3.第一次启动服务servicerpcbind startservicenfs start2.创建共享目录...
分类:
其他好文 时间:
2015-05-07 13:53:49
阅读次数:
114
今天就讲一讲NFS的配置,NFS共享服务提供Linux与Unix之间的共享服务1.软件包nfs-utils portmap2.主配置文件 /etc/exports3.安装rpm-qnfs-utilsportmap或者用yum-yinstallnfs[root@ser1~]#cat/etc/exports/root192.168.10.20(rw,sync,no_root_squash)/usr/src192.168.10.0/24(rw..
分类:
其他好文 时间:
2015-04-13 13:02:31
阅读次数:
139
1. 检查是否已安装NFS rpm -qa | grep nfs rpm -qa | grep portmap2. 安装NFS yum install nfs-utils* chkconfig nfs on chkconfig rpcbind on s...
分类:
其他好文 时间:
2015-04-09 14:57:37
阅读次数:
115
一、环境介绍:服务器:centos 192.168.1.225客户端:centos 192.168.1.226二、安装:NFS的安装配置:centos 5 :yum -y install nfs-utils portmapcentos 6(在CentOS 6.3当中,portmap服务由rpcbin...
分类:
其他好文 时间:
2015-04-06 15:25:17
阅读次数:
147
rpc
remote procedure call
nfs_s rpc nfs_s向rpc注册短口
client链接nfs_S
nfs_utils
nfs_utils_lib
nfsd
rpc.mountd
rpc.lockd
rpc.statd
rpc.quotad
scripts:
nfs (nfsd , rpc.mountd , rpc.quot...
分类:
系统相关 时间:
2015-04-04 09:22:16
阅读次数:
175
不知道谁装的服务器,默认自带,以下内容摘自互联网,配置部分按教程执行成功一、环境介绍: 服务器:centos 192.168.1.225 客户端:centos 192.168.1.226二、安装:NFS的安装配置:centos 5 :yum -y install nfs-utils portma.....
分类:
其他好文 时间:
2015-03-31 12:42:39
阅读次数:
147
第一,首先在服务器上装nfs-utils和libs两个rpm文件包可以yum源进行yum-yinstallnfs-utils*第二,建立要共享的文件夹如在mkdir/it设置改文件共享。第三,设置配置文件/etc/exports打开文件里面是空的设置格式/it192.168.0.0(网段或者ip地址都可以)(权限)數值內容說明rwro該目?.
分类:
系统相关 时间:
2015-03-28 06:32:51
阅读次数:
210
NFS用于网络共享存储,类似windows目录共享。配置NFS需在服务端和客户端都安装两个包(nfs-utils和rpcbind),安装nfs-utils时自动会把rpcbind一起安装上。安装命令:yuminstall-ynfs-utils1.NFS服务端配置1)编辑配置文件:vim/etc/exports写入内容:/home/192.168.16.0/24(rw,sy..
分类:
其他好文 时间:
2015-03-20 11:09:36
阅读次数:
151