码迷,mamicode.com
首页 >  
搜索关键字:write concern    ( 14713个结果
交换机基本命令与配置方法
交换机基本工作模式及命令 打开超级终端用consol线com口连接交换机,就能在终端配置交换机了。 内存是存不住东西的,一断电你的历史操作内容全没了。 把配置文件复制到硬盘里并改名staertup-config。 nfig 或者write(厂家不同,这条命令生不生效不知道,第一条命令一定生效)。 1... ...
分类:其他好文   时间:2020-09-24 21:11:32    阅读次数:60
升级你的babel
升级你的babel npx babel-upgrade --write # 或是安裝 babel-upgrade 在 global 并执行 npm install babel-upgrade -g babel-upgrade --write 执行之后需要注意的 很多包的格式都发生了变化,部分的包甚至 ...
分类:其他好文   时间:2020-09-21 11:53:09    阅读次数:43
write不带缓冲,标准IO库带缓冲
1 #include "apue.h" 2 3 int globvar = 6; 4 char buf[] = "a write to stdout\n"; 5 6 int main() 7 { 8 int var; 9 pid_t pid; 10 11 var = 88; 12 if (write ...
分类:其他好文   时间:2020-09-18 04:07:04    阅读次数:36
Win+R cmd 常用命令
Win+R弹出win10的命令窗口,然后输入cmd 一般,进入的初始目录是C盘。 calc:启动计算器 notepad:打开记事本 mspaint:打开画图板 write:快速打开写字板 snippingtool:截图工具,支持无规则截图 osk:打开屏幕键盘 mstsc:远程桌面连接 eventv ...
分类:Windows程序   时间:2020-09-18 03:32:14    阅读次数:73
五角星绘制
from turtle import* fillcolor("red") begin_fill() while True: forward(200) right(144) if abs(pos()) < 1: break end_fill() import turtle turtle.write(" ...
分类:其他好文   时间:2020-09-18 02:17:34    阅读次数:42
tecplot 输出framestyle,linked layout, packaged layout
##layout files If a frame defined in a layout file requires an attached dataset, the data files necessary to build the dataset are referenced in the l ...
分类:其他好文   时间:2020-09-18 02:09:57    阅读次数:40
ctf收获 工具使用总结
今天参加了省里组织的ctf大赛,先做了一堆不知所云的安全工程师选择题,面对大伙质疑我水平的目光+浪费了1个小时搜答案,现代互联网精神死了!那些工程师的题纷纷要钱,随便选了错了一堆。然后正式ctf就2小时时间,不得不说解出flag那是相当开心,然后觉得怎么这么简单想好久,解不出的就疯狂给题加戏,觉得可 ...
分类:其他好文   时间:2020-09-18 01:36:22    阅读次数:28
XCTF EasyHook
无壳,使用IDA直接分析主函数 逻辑很简单,问题的关键是Hook,题目也是EasyHook, 会发现在生成文件后,文件内容是被加密后的,那就怀疑加密函数参与Hook 动态调试一步步来看,先进入401220函数 发现这里有获取writefile函数地址的操作,初步怀疑可能进行hook操作 然后又进行一 ...
分类:其他好文   时间:2020-09-18 00:03:59    阅读次数:26
leetcode 299. Bulls and Cows
You are playing the following Bulls and Cows game with your friend: You write down a number and ask your friend to guess what the number is. Each time ...
分类:其他好文   时间:2020-09-17 22:49:35    阅读次数:38
MATLAB 生成高斯图像
1 cl; 2 m=31; 3 n=31; 4 img=zeros(m+1,n+1); 5 img=double(img); 6 pi=3.1415926; 7 sigma=10; 8 for i=-(m/2):m/2 9 for j=-(n/2):n/2 10 img(i+m/2+1,j+n/2+ ...
分类:其他好文   时间:2020-09-17 20:53:03    阅读次数:33
14713条   上一页 1 ... 27 28 29 30 31 ... 1472 下一页
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!