码迷,mamicode.com
首页 >  
搜索关键字:c++ driver    ( 5694个结果
ChibiOS/RT 2.6.9 CAN Low Level Driver for STM32
/* ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file exce...
分类:移动开发   时间:2015-08-09 13:56:05    阅读次数:338
MySql
错误信息如下:java.lang.ClassNotFoundException: com.mysql.jdbc.Driver at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1720) ...
分类:数据库   时间:2015-08-09 12:27:19    阅读次数:137
ChibiOS/RT 2.6.9 CAN Driver
Detailed DescriptionGeneric CAN Driver.This module implements a generic CAN (Controller Area Network) driver allowing the exchange of information at f...
分类:移动开发   时间:2015-08-09 12:16:32    阅读次数:175
Use Uncertainty As a Driver
?Use Uncertainty As a DriverKevlin HenneyConFRonTEd WiTH TWo opTionS, most people think that the most impor- tant thing to do is to make a choice between them. In design (software or otherwise), it is...
分类:其他好文   时间:2015-08-09 10:52:29    阅读次数:120
关于Wireshark "The NPF driver isn’t running……"解决办法
启动Wireshark软件时出现了如下图所示的错误,就搜索了一下解决方法,特总结如下: 这个错误是因为没有开启NPF服务造成的。简要说一下NPF吧。 NPF即网络数据包过滤器(Netgroup Packet Filter,NPF)是Winpcap的核心部分,它是Winpcap完成困难工作的组件...
分类:其他好文   时间:2015-08-09 00:16:12    阅读次数:149
简单的Linux 驱动模块编译,加载过程
简单的Linux 驱动模块编译,加载过程2010-03-14 14:48:24|分类:Driver|标签:|字号大中小订阅本文记录我的第一个Linux设备驱动程序的编译过程。遇到问题的解决方法。环境:2.4.18-14的内核,Linux内核源码:2.4.18。 Linux内核源码路径:/usr/sr...
分类:系统相关   时间:2015-08-08 13:30:30    阅读次数:152
KEPServerEx OPC 读取西门子 PLC S7200 SMART的数据
KEPServerEx OPC 配置参数过程(读取西门子 PLC S7200 SMART的数据) 1、  新建NEW Channel –> Channel name xxxx -> Device driver “SiemensTCP/IP Ethernet” -> Network Adapter “Realtek PCIe GBE ……” ->默认完成。 2、add device –>...
分类:其他好文   时间:2015-08-08 12:05:09    阅读次数:1797
AT91 USB Composite Driver Implementation
AT91 USB Composite Driver Implementation1. Introduction The USB Composite Device is a general way to integrate two or more functions into one single d...
分类:其他好文   时间:2015-08-08 06:30:00    阅读次数:123
mongodb c++接口
mongo-cxx-driver-legacy-1.0.4 scons --extrapath=/usr/local/boost158/ --prefix=/usr/local/mongodb30??--ssl=SSL?--use-sasl-client=USE-SASL-CLIENT ./ boost_1_58_0.tar ./bootstrap.sh --prefix=/usr/...
分类:数据库   时间:2015-08-07 20:27:25    阅读次数:578
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!