码迷,mamicode.com
首页 > Windows程序 > 详细

windows安装zabbix_anget(学习,不保证完全有效)

时间:2016-02-14 15:36:57      阅读:400      评论:0      收藏:0      [点我收藏+]

标签:windows安装zabbix   zabbix_anget

1、下载zabbix_anget

下载地址为:

http://www.zabbix.com/downloads/2.4.4/zabbix_agents_2.4.4.win.zip


2、修改zabbix_agentd.win.conf文件

将压缩包解压缩至c:\zabbix\

然后将c:\zabbix\conf\zabbix_agentd.win.conf修改

全文如下:

# This is config file for zabbix_agentd

# To get more information about ZABBIX, go http://www.zabbix.com


############ GENERAL PARAMETERS #################


# List of comma delimited IP addresses (or hostnames) of ZABBIX servers. 

# No spaces allowed. First entry is used for sending active checks.

# Note that hostnames must resolve hostname->IP address and

# IP address->hostname.


Server=192.168.2.207


# Server port for sending active checks


#ServerPort=10051


# Unique hostname. Required for active checks.


Hostname=win2203


# Listen port. Default is 10050


#ListenPort=10050


# IP address to bind agent

# If missing, bind to all available IPs


#ListenIP=127.0.0.1


# Number of pre-forked instances of zabbix_agentd.

# Default value is 5

# This parameter must be between 1 and 16


StartAgents=5


# How often refresh list of active checks. 2 minutes by default.


#RefreshActiveChecks=120


# Disable active checks. The agent will work in passive mode listening server.


#DisableActive=1


# Enable remote commands for ZABBIX agent. By default remote commands disabled.


#EnableRemoteCommands=1


# Specifies debug level

# 0 - debug is not created

# 1 - critical information

# 2 - error information

# 3 - warnings (default)

# 4 - for debugging (produces lots of information)


DebugLevel=3


# Name of PID file


#PidFile=/var/tmp/zabbix_agentd.pid


# Name of log file.

# If not set, syslog will be used


LogFile=C:/zabbix/zabbix_agentd.log


# Maximum size of log file in MB. Set to 0 to disable automatic log rotation.

#LogFileSize=1


# Spend no more than Timeout seconds on processing

# Must be between 1 and 30


Timeout=3


####### USER-DEFINED MONITORED PARAMETERS #######

# Format: UserParameter=<key>,<shell command>

# Note that shell command must not return empty string or EOL only

#UserParameter=system.test,who|wc -l

### Set of parameter for monitoring MySQL server (v3.23.42 and later)

### Change -u<username> and add -p<password> if required

#UserParameter=mysql.ping,mysqladmin -uroot ping|grep alive|wc -l

#UserParameter=mysql.uptime,mysqladmin -uroot status|cut -f2 -d":"|cut -f1 -d"T"

#UserParameter=mysql.threads,mysqladmin -uroot status|cut -f3 -d":"|cut -f1 -d"Q"

#UserParameter=mysql.questions,mysqladmin -uroot status|cut -f4 -d":"|cut -f1 -d"S"

#UserParameter=mysql.slowqueries,mysqladmin -uroot status|cut -f5 -d":"|cut -f1 -d"O"

#UserParameter=mysql.qps,mysqladmin -uroot status|cut -f9 -d":"

#UserParameter=mysql.version,mysql -V


zabbix_agentd.win.conf全文,红色加线部分需要修改,Server为zabbix服务器端ip,hostname为本机名,logfile为日志文件地址。

zabbix_agentd.win.conf复制到  c:\zabbix\bin\win64\  目录下(32位系统复制到bin\win32目录下)

zabbix_agentd.win.conf复制到  c:\ 根目录下,然后修改文件名为zabbix_agentd.conf

在c:\zabbix新建一个zabbix_angetd.log文件。(日志文件)

3、执行安装命令

点开始》运行》cmd 打开命令行窗口

输入c:\zabbix\bin\win64\zabbix_angetd -i

技术分享

4、启动zabbix_agent服务

点开始》运行》services.msc打开服务窗口

启动zabbix anget服务

技术分享

本文出自 “学习笔记” 博客,请务必保留此出处http://sttdwxj.blog.51cto.com/10536221/1741899

windows安装zabbix_anget(学习,不保证完全有效)

标签:windows安装zabbix   zabbix_anget

原文地址:http://sttdwxj.blog.51cto.com/10536221/1741899

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有 京ICP备13008772号-2
迷上了代码!