码迷,mamicode.com
首页 > 数据库 > 详细

mysql 修改data目录后 无法使用脚本启动

时间:2016-05-24 17:07:48      阅读:268      评论:0      收藏:0      [点我收藏+]

标签:mysql 启动

一、公司Mysql环境

    #1. 目前公司Mysql只做了主从

    #2. Mysql数据库版本:Percona-Server-server-56-5.6.20-rel68.0.el6.x86_64.rpm


二、Mysql从库的问题

    Mysql从库一直都用命令启动:mysqld_safe --defaults-file=/etc/my.cnf & 。用/etc/init.d/mysql启动脚本一直报错。最郁闷的是在错误日志里没有记录启动错误信息。 

我忍受了大半年的命令启动,终于不想再忍下去了。


之前一直以为/etc/my.cnf有问题,再尝试大半天时间后没有解决。 我决定还是卸载之前的mysql,重新安装mysql


卸载准备工作:      

tar zcvf mysql.tar.gz  /data/mysql        # 备份mysql数据目录

mv  /etc/my.cnf  /etc/my.cnf.ori

删除

rm -rf /data/mysql  

rpm -e Percona-Server-server-56-5.6.20

rpm -e Percona-Server-client-56-5.6.20

rpm -e Percona-Server-shared-56-5.6.20

安装

rpm -ivhPercona-Server-client-56-5.6.20-rel68.0.el6.x86_64.rpm Percona-Server-server-56-5.6.20-rel68.0.el6.x86_64.rpm Percona-Server-shared-56-5.6.20-rel68.0.el6.x86_64.rpm


#############################################

     我以为会重新生成默认的/etc/my.cnf,发现没有。又找了一台服务器安装了mysql,导出默认的/etc/my.cnf

###################################

重装之后,在不修改默认配置是可以正常启动的。但只要导入生产/etc/my.cnf配置后又是错误

[root@###### ~]# service mysql start

Starting MySQL (Percona Server).The server quit without upd[FAILED]D file (/home/mysql/mysql.pid).


再改回默认的/etc/my.cnf正常。 只要修改默认配置就出错。(真心折腾啊)

[mysqld]
datadir=/data/mysql      # 默认/var/lib/mysql
socket=/data/mysql/mysql.sock  # 默认/var/lib/mysql/mysql.sock
user=mysql
# Disabling symbolic-links is recommended to prevent assorted security risks
symbolic-links=0
[mysqld_safe]
log-error=/data/mysqld.log   # 默认/var/log/mysqld.log
pid-file=/data/mysqld/mysqld.pid   #/var/run/mysqld/mysqld.pid

幸运的是此次有了错误日志

[root@###### data]# !tail        

tail -20 /var/log/mysqld.log  

160524 14:07:20 mysqld_safe Starting mysqlddaemon with databases from /data/mysql

2016-05-24 14:07:20 13213 [Warning] Can‘t create test file/data/mysql/mfs-data3.lower-test

2016-05-24 14:07:20 13213 [Warning] Can‘tcreate test file /data/mysql/mfs-data3.lower-test

/usr/sbin/mysqld: File‘/data/mysql/mysql-bin.index‘ not found (Errcode: 13 - Permission denied)

2016-05-24 14:07:20 13213 [ERROR] Aborting


花了点时间找到该错误是由selinux引起的。 关闭selinux

setenforce 0

sed -i "s#enforcing#disabled#g"  /etc/selinux/config


再次启动

[root@###### mysql]# service mysql start

Starting MySQL (Percona Server)..The server quit without up[FAILED]ID file (/home/mysql/mysql.pid).

[root@yyqdb02 mysql]# cat log/mysql-error.log 

160524 14:31:37 mysqld_safe Starting mysqld daemon with databases from /home/mysql/data/

2016-05-24 14:31:38 6632 [Warning] Can‘t create test file /data/mysql/data/*.lower-test

2016-05-24 14:31:38 6632 [Warning] Can‘t create test file /data/mysql/data/*.lower-test

/usr/sbin/mysqld: Can‘t change dir to ‘/data/mysql/data/‘ (Errcode: 2 - No such file or directory)

2016-05-24 14:31:38 6632 [ERROR] Aborting


思路:创建所需的目录

mkdir /data/mysql/{data,log} -p

发现问题依旧。后来仔细检查了生产的/etc/my.cnf

datadir                        = /data/mysql/data/

终于找到原因了:

之前创建新实例命令是:mysql_install_db  --user=mysql --datadir=/home/mysql

改为                mysql_install_db  --user=mysql --datadir=/data/mysql/data

再次使用/etc/init.d/mysql restart终于成功了。 

[root@###### data]# service mysql restart 

Shutting down MySQL (Percona Server).. SUCCESS! 

Starting MySQL (Percona Server).. SUCCESS! 



三、恢复从库身份

     之前主库一直有备份,所以不用担心在主库工作时间做主从同步了。

将主备份拷贝到从

[root@##### tmp]# scp 192.168.2.105:/data/bak/all_2016-05-22.sql.gz ./

root@172.30.1.10‘s password:

all_2016-05-22.sql.gz                                                                                                                                                                                100%   21MB 20.9MB/s   00:00   

[root@##### tmp]# ls

all_2016-05-22.sql.gz 

[root@yyqdb02 tmp]# gzip -d all_2016-05-22.sql.gz

[root@yyqdb02 tmp]# less all_2016-05-22.sql

-- MySQL dump 10.13 Distrib 5.6.20-68.0, for Linux (x86_64)

--

-- Host: localhost   Database:

-- ------------------------------------------------------

-- Server version      5.6.20-68.0-log

 

/*!40101 SET@OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */;

/*!40101 SET@OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */;

/*!40101 SET@OLD_COLLATION_CONNECTION=@@COLLATION_CONNECTION */;

/*!40101 SET NAMES utf8 */;

/*!40103 SET @OLD_TIME_ZONE=@@TIME_ZONE */;

/*!40103 SET TIME_ZONE=‘+00:00‘ */;

/*!40014 SET @OLD_UNIQUE_CHECKS=@@UNIQUE_CHECKS,UNIQUE_CHECKS=0 */;

/*!40014 SET@OLD_FOREIGN_KEY_CHECKS=@@FOREIGN_KEY_CHECKS, FOREIGN_KEY_CHECKS=0 */;

/*!40101 SET @OLD_SQL_MODE=@@SQL_MODE,SQL_MODE=‘NO_AUTO_VALUE_ON_ZERO‘ */;

/*!40111 SET @OLD_SQL_NOTES=@@SQL_NOTES, SQL_NOTES=0*/;

 

--

-- Position to start replication or point-in-timerecovery from

--

 

-- CHANGE MASTER TO MASTER_LOG_FILE=‘mysql-bin.000042‘, MASTER_LOG_POS=142703;

 

--

-- Current Database: `decorate`

--

 

[root@##### tmp]# service mysql status    # mysql服务器运行着

MySQL (Percona Server) running (17022)                     [  OK  ]

[root@yyqdb02 tmp]#mysql -uroot -p < all_2016-05-22.sql

Enter password:

[root@##### tmp]# mysql -uroot -p     # 由于没有flush privileges,密码为空。害我输了好几次导入后的root密码

Enter password:

ERROR 1045 (28000): Access denied for user‘root‘@‘localhost‘ (using password: YES)

[root@###### tmp]# mysql -uroot -p

Enter password:

Welcome to the MySQL monitor.  Commands end with ; or \g.

Your MySQL connection id is 5

Server version: 5.6.20-68.0-log Percona Server (GPL),Release 68.0, Revision 656

 

Copyright (c) 2009-2014 Percona LLC and/or itsaffiliates

Copyright (c) 2000, 2014, Oracle and/or its affiliates.All rights reserved.

 

Oracle is a registered trademark of Oracle Corporationand/or its

affiliates. Other names may be trademarks of theirrespective

owners.

 

Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear thecurrent input statement.

 

mysql> flushprivileges;   # 刷新下

Query OK, 0 rows affected (0.00 sec)

 

mysql> changemaster tomaster_host=‘192.168.2.105‘,master_port=3306,master_user=‘rep‘,master_password=‘password‘,MASTER_LOG_FILE=‘mysql-bin.000042‘,MASTER_LOG_POS=142703;    # 此命令已经可以盲打了

Query OK, 0 rows affected, 2 warnings (0.01 sec)

 

mysql> start slave;

Query OK, 0 rows affected (0.00 sec)

 

mysql> showslave status\G

*************************** 1. row***************************

              Slave_IO_State: Waiting for master to send event

                 Master_Host: 172.30.1.10

                 Master_User: slave

                 Master_Port: 3306

               Connect_Retry: 60

             Master_Log_File: mysql-bin.000042

         Read_Master_Log_Pos: 302454

               Relay_Log_File: relay-bin.000002

               Relay_Log_Pos: 160034

       Relay_Master_Log_File: mysql-bin.000042

             Slave_IO_Running: Yes

            Slave_SQL_Running: Yes

             Replicate_Do_DB:

         Replicate_Ignore_DB:

           Replicate_Do_Table:

      Replicate_Ignore_Table:

     Replicate_Wild_Do_Table:

 Replicate_Wild_Ignore_Table:

                  Last_Errno: 0

                  Last_Error:

                Skip_Counter: 0

         Exec_Master_Log_Pos: 302454

             Relay_Log_Space: 160201

             Until_Condition: None

              Until_Log_File:

               Until_Log_Pos: 0

          Master_SSL_Allowed: No

          Master_SSL_CA_File:

          Master_SSL_CA_Path:

              Master_SSL_Cert:

           Master_SSL_Cipher:

              Master_SSL_Key:

       Seconds_Behind_Master: 0

Master_SSL_Verify_Server_Cert: No

               Last_IO_Errno: 0

               Last_IO_Error:

              Last_SQL_Errno: 0

               Last_SQL_Error:

 Replicate_Ignore_Server_Ids:

            Master_Server_Id: 1

                 Master_UUID: c73c4373-34fd-11e4-a1bd-b82a72cf2c9f

            Master_Info_File: /home/mysql/data/master.info

                    SQL_Delay: 0

          SQL_Remaining_Delay: NULL

     Slave_SQL_Running_State: Slave has read all relay log; waiting for theslave I/O thread to update it

          Master_Retry_Count: 86400

                 Master_Bind:

     Last_IO_Error_Timestamp:

    Last_SQL_Error_Timestamp:

              Master_SSL_Crl:

          Master_SSL_Crlpath:

          Retrieved_Gtid_Set:

           Executed_Gtid_Set:

               Auto_Position: 0

1 row in set (0.00 sec)

 

####至此,全部搞定。 主从2分钟搞定,而且没出错,太顺利了,让我无法接受啊。

 


本文出自 “Linux学习笔记” 博客,请务必保留此出处http://genxin.blog.51cto.com/665191/1782573

mysql 修改data目录后 无法使用脚本启动

标签:mysql 启动

原文地址:http://genxin.blog.51cto.com/665191/1782573

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!