码迷,mamicode.com
首页 > 系统相关 > 详细

《linux 内核完全剖析》 fork.c 代码分析笔记

时间:2014-05-08 17:15:39      阅读:485      评论:0      收藏:0      [点我收藏+]

标签:linux kernel   fork   

 fork.c 代码分析笔记


bubuko.com,布布扣

verifiy_area

long last_pid=0; //全局变量,用来记录目前最大的pid数值

void verify_area(void * addr,int size) // addr 是虚拟地址 ,size是需要写入的字节大小
{
    unsigned long start;

    start = (unsigned long) addr; //把地址强制类型转换之后,赋值给start
    size += start & 0xfff; //取addr在当前虚拟地址中4M页面的偏移值,加上size可以得到要求写入虚拟地址的末端
    start &= 0xfffff000; //取addr所在虚拟地址页面的起始处,即该页在数据段中偏移量
    start += get_base(current->ldt[2]); //get_base得到当前进程数据段的线性基地址,加上start偏移量,于是实现了虚拟地址转化到线性地址
    while (size>0) {
        size -= 4096;
        write_verify(start);//对线性地址start进行操作,验证该地址处页面是否可写
        start += 4096;
    }
}


copy_mem

int copy_mem(int nr,struct task_struct * p) //复制内存页表,把进程p的数据段copy到nr*TASK的线性地址处
{
    unsigned long old_data_base,new_data_base,data_limit;
    unsigned long old_code_base,new_code_base,code_limit;

    code_limit=get_limit(0x0f);//0x0f任务代码段选择符 ,get_limit 得到代码段的段限长
    data_limit=get_limit(0x17);//0x17任务数据段选择符,get_limit 得到数据段的段限长
    old_code_base = get_base(current->ldt[1]); //得到代码段的基地址
    old_data_base = get_base(current->ldt[2]); //得到数据段的基地址
    if (old_data_base != old_code_base) //linux 0.12 是 I&D的模式
        panic("We don‘t support separate I&D");
    if (data_limit < code_limit) //要求数据段不小于代码段
        panic("Bad data_limit");
    new_data_base = new_code_base = nr * TASK_SIZE; //更新代码段的基地址
    p->start_code = new_code_base; //更新当前进程代码段的基地址
    set_base(p->ldt[1],new_code_base);//把new_code_base 写入到ldt[1]
    set_base(p->ldt[2],new_data_base);
    if (copy_page_tables(old_data_base,new_data_base,data_limit)) {
    //把old_date_base 线性地址的数据复制到new_data_base处
    //copy_page_tables 成功返回0,错误返回-1.如果失败。就以页为单位,free掉new_date_base涉及的内存页
        free_page_tables(new_data_base,data_limit);
        return -ENOMEM;
    }
    return 0;
}


copy_process

/*
 *  Ok, this is the main fork-routine. It copies the system process
 * information (task[nr]) and sets up the necessary registers. It
 * also copies the data segment in it‘s entirety.
 */
int copy_process(int nr,long ebp,long edi,long esi,long gs,long none,
        long ebx,long ecx,long edx, long orig_eax,
        long fs,long es,long ds,
        long eip,long cs,long eflags,long esp,long ss)
{
    struct task_struct *p;
    int i;
    struct file *f;

    p = (struct task_struct *) get_free_page(); //申请一页空内存,由p指向它
    if (!p)
        return -EAGAIN;
    task[nr] = p; //把新进程指针copy到task数组里面
    *p = *current;    /* NOTE! this doesn‘t copy the supervisor stack */
    p->state = TASK_UNINTERRUPTIBLE;//copy进程的时候,p进程状态设置为TASK_UNINTERRIPTIBLE
    p->pid = last_pid;
    p->counter = p->priority; //运行时间数
    p->signal = 0; //初始没有接受任何信号,信号图为空
    p->alarm = 0;
    p->leader = 0;    //fork出的进程不继承session leader,保证session leader只有一个    /* process leadership doesn‘t inherit */
    p->utime = p->stime = 0; //用户态时间和内核态时间
    p->cutime = p->cstime = 0;//子进程用户态时间和内核态时间
    p->start_time = jiffies; //进程p开始时间
    p->tss.back_link = 0;//修改任务状态TSS数据
    p->tss.esp0 = PAGE_SIZE + (long) p; //任务内核态的栈指针
    p->tss.ss0 = 0x10;
    p->tss.eip = eip; //指令代码指针
    p->tss.eflags = eflags;
    p->tss.eax = 0;
    p->tss.ecx = ecx;
    p->tss.edx = edx;
    p->tss.ebx = ebx;
    p->tss.esp = esp;
    p->tss.ebp = ebp;
    p->tss.esi = esi;
    p->tss.edi = edi;
    p->tss.es = es & 0xffff;
    p->tss.cs = cs & 0xffff;
    p->tss.ss = ss & 0xffff;
    p->tss.ds = ds & 0xffff;
    p->tss.fs = fs & 0xffff;
    p->tss.gs = gs & 0xffff;
    p->tss.ldt = _LDT(nr); //_LDT宏计算出nr进程的LDT描述符的选择符
    p->tss.trace_bitmap = 0x80000000;
    if (last_task_used_math == current)
        __asm__("clts ; fnsave %0 ; frstor %0"::"m" (p->tss.i387));
    if (copy_mem(nr,p)) { //把 进程p的内容copy到nr*TASK的线性地址处
        task[nr] = NULL; //失败就把task数组的对应指针置为NULL说明进程创建失败
        free_page((long) p); //善后,把p相关的内存页释放
        return -EAGAIN;
    }
    for (i=0; i<NR_OPEN;i++) //如果以上copy_mem成功,则把parent 打开的文件也让child继承
        if (f=p->filp[i])
            f->f_count++;
    if (current->pwd)//引用+1
        current->pwd->i_count++;
    if (current->root)
        current->root->i_count++;
    if (current->executable)
        current->executable->i_count++;
    if (current->library)
        current->library->i_count++;
    set_tss_desc(gdt+(nr<<1)+FIRST_TSS_ENTRY,&(p->tss));
    set_ldt_desc(gdt+(nr<<1)+FIRST_LDT_ENTRY,&(p->ldt));
    p->p_pptr = current;
    p->p_cptr = 0;
    p->p_ysptr = 0;
    p->p_osptr = current->p_cptr;
    if (p->p_osptr)
        p->p_osptr->p_ysptr = p;
    current->p_cptr = p;
    p->state = TASK_RUNNING;    /* do this last, just in case */
    return last_pid;
}


find_empty_process

int find_empty_process(void) //为新进程获取不重复的pid
{
    int i;

    repeat:
        if ((++last_pid)<0) last_pid=1;
        for(i=0 ; i<NR_TASKS ; i++)
            if (task[i] && ((task[i]->pid == last_pid) ||
                        (task[i]->pgrp == last_pid))) //如果last_pid存在,那么repeat再测试 ++last_pid
                goto repeat;
    //在已经把lastpid变成所有进程都不同的pid之后,下面继续
    for(i=1 ; i<NR_TASKS ; i++) //找出一个空闲进程,返回它的索引 i
        if (!task[i])
            return i;
    return -EAGAIN; //如果64个进程都存在,那么报错
}


 

bubuko.com,布布扣


《linux 内核完全剖析》 fork.c 代码分析笔记,布布扣,bubuko.com

《linux 内核完全剖析》 fork.c 代码分析笔记

标签:linux kernel   fork   

原文地址:http://blog.csdn.net/cinmyheart/article/details/25295623

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!