码迷,mamicode.com
首页 > 数据库 > 详细

0120Keeplived实现自动切换Mysql服务

时间:2017-01-20 19:11:28      阅读:225      评论:0      收藏:0      [点我收藏+]

标签:sim   table   capture   oop   configure   状态   firewall   bytes   .gz   

转自http://biancheng.dnbcw.info/mysql/381020.html

Keepalived+mysql 自动切换
网络结构:
VIP 192.168.88.200
mysq11 192.168.88.130 主
mysql2 192.168.88.131 备
一 mysql 主主同步
二 安装keepalived 
三 keepalived 主备配置文件
四 mysql状态检测脚本/root/keepalived_check_mysql.sh
五 防火墙设置 
六 启动keepalived
七 查看vrrp通讯记录
八 查看虚拟IP
九 测试
一 mysql 主主同步(略)
说明:数据库testA和testB分别在mysql1和mysql2上,testDB是通过主主复制获得,便于后面的测试
二 安装keepalived
1.软件包下载地址http://www.keepalived.org
安装keepalived,从官方网站下载keepalived-1.2.2.tar.gz后
# tar xvf keepalived-1.2.2.tar.gz
# cd keepalived-1.2.2
# ./configure
# make && make install
2.查看keepalived位置
[root@lvs-dr1 keepalived-1.2.2]# find / -name "keepalived"
/root/keepalived-1.2.2/keepalived
/root/keepalived-1.2.2/keepalived/etc/keepalived
/root/keepalived-1.2.2/bin/keepalived
/usr/local/sbin/keepalived
/usr/local/etc/rc.d/init.d/keepalived
/usr/local/etc/keepalived
/usr/local/etc/sysconfig/keepalived
3.复制文件
# cp /usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
# cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
# mkdir /etc/keepalived
# cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/
# cp /usr/local/sbin/keepalived /usr/sbin/
三 keepalived 主备配置文件
主备置文件不同处有 state nopreempt priority 参考资料里有详细说明作用
192.168.88.130 主配置
vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
   notification_email {
         15301727316@189.cn
   }
   notification_email_from zalifei@126.com
   smtp_connect_timeout 3
   smtp_server 127.0.0.1
   router_id MySQL-ha
}
vrrp_script check_run {
   script "/root/keepalived_check_mysql.sh"
   interval 5
}
vrrp_sync_group VG1 {
    group {
          VI_1
    }
}
vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 88
    priority 100
    advert_int 1
    nopreempt
    authentication {
        auth_type PASS
        auth_pass skyai1.cublog.cn
    }
    track_script {
        check_run
    }
    virtual_ipaddress {
        192.168.88.200
    }
}
复制代码192.168.88.131 备用配置文件
vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
   notification_email {
         15301727316@189.cn
   }
   notification_email_from zalifei@126.com
   smtp_connect_timeout 3
   smtp_server 127.0.0.1
   router_id MySQL-ha
}
vrrp_script check_run {
   script "/root/keepalived_check_mysql.sh"
   interval 5
}
vrrp_sync_group VG1 {
    group {
          VI_1
    }
}
vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 88
    priority 99
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass skyai1.cublog.cn
    }
    track_script {
        check_run
    }
    virtual_ipaddress {
        192.168.88.200
    }
}
四 mysql状态检测脚本/root/keepalived_check_mysql.sh
# vim /root/keepalived_check_mysql.sh
#!/bin/bash
MYSQL=/usr/local/webserver/mysql/bin/mysql
MYSQL_HOST=localhost
MYSQL_USER=root
MYSQL_PASSWORD=mysql
CHECK_TIME=3
#mysql  is working MYSQL_OK is 1 , mysql down MYSQL_OK is 0
MYSQL_OK=1
function check_mysql_helth (){
    $MYSQL -h $MYSQL_HOST -u $MYSQL_USER -p${MYSQL_PASSWORD} -e "show status;" >/dev/null 2>&1
    if [ $? = 0 ] ;then
    MYSQL_OK=1
    else
    MYSQL_OK=0
    fi
    return $MYSQL_OK
}
while [ $CHECK_TIME -ne 0 ]
do
    let "CHECK_TIME -= 1"
    check_mysql_helth
if [ $MYSQL_OK = 1 ] ; then
    CHECK_TIME=0
    exit 0
fi
if [ $MYSQL_OK -eq 0 ] &&  [ $CHECK_TIME -eq 0 ]
then
    /etc/init.d/keepalived stop
    exit 1
fi
sleep 1
done
赋予执行权限
# chmod +x /root/keepalived_check_mysql.sh 
五 防火墙设置
vrrp协议 使用224.0.0.18地址组播
iptables -I RH-Firewall-1-INPUT  -d 224.0.0.18 -j ACCEPT
六 启动keepalived
# service keepalived start
七 查看vrrp通讯记录
# tcpdump vrrp
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
11:51:45.632044 IP 192.168.88.130 > vrrp.mcast.net: VRRPv2, Advertisement, vrid 88, prio 100, authtype simple, intvl 1s, length 20
八 查看虚拟IP
# ip a 
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:0c:29:bf:c5:77 brd ff:ff:ff:ff:ff:ff
    inet 192.168.88.130/24 brd 192.168.88.255 scope global eth0
    inet 192.168.88.200/32 scope global eth0
    inet6 fe80::20c:29ff:febf:c577/64 scope link 
       valid_lft forever preferred_lft forever
3: sit0: <NOARP> mtu 1480 qdisc noop 
    link/sit 0.0.0.0 brd 0.0.0.0
九 测试
# mysql -uroot -h192.168.88.200 -p
mysql> show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| test               |
| testA              |
| testDB             |
+--------------------+
5 rows in set (0.00 sec)
停掉主数据库服务,测试
# service mysqld stop
# mysql -uuser -h "192.168.88.200" -p
mysql> show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| test               |
| testB              |
| testDB             |
+--------------------+
5 rows in set (0.02 sec)
到这里,测试完成

0120Keeplived实现自动切换Mysql服务

标签:sim   table   capture   oop   configure   状态   firewall   bytes   .gz   

原文地址:http://www.cnblogs.com/qcfeng/p/6323645.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!