码迷,mamicode.com
首页 > 系统相关 > 详细

Linux命令(二十五) 磁盘管理命令(三) fdisk

时间:2018-06-17 17:50:50      阅读:231      评论:0      收藏:0      [点我收藏+]

标签:enc   windows   gpt   before   writing   for   primary   开始   run   

一、fdisk命令介绍

fdisk 为Linux系统下的分区管理工具,类型windows下的 分区助手等工具软件。分过区装过操作系统的人都知道硬盘分区是必要和重要的。fdisk 的帮助如下所示:

[root@localhost hk]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xb7af7b64.

Command (m for help): h
h: unknown command
Command action
   a   toggle a bootable flag
   b   edit bsd disklabel
   c   toggle the dos compatibility flag
   d   delete a partition
   g   create a new empty GPT partition table
   G   create an IRIX (SGI) partition table
   l   list known partition types
   m   print this menu
   n   add a new partition
   o   create a new empty DOS partition table
   p   print the partition table
   q   quit without saving changes
   s   create a new empty Sun disklabel
   t   change a partition's system id
   u   change display/entry units
   v   verify the partition table
   w   write table to disk and exit
   x   extra functionality (experts only)

以上参数中常用参数说明:

d 删除存在的硬盘分区
n 添加分区
p 查看分区信息
w 保存分区变更信息 

二、硬盘详细分区和挂载过程完整演示

# 先查看分区信息
[root@localhost hk]# fdisk -l

Disk /dev/sda: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000c44fb

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048     2099199     1048576   83  Linux
/dev/sda2         2099200    83886079    40893440   8e  Linux LVM

# 这里 /dev/sdb 为未使用的分区
Disk /dev/sdb: 1073 MB, 1073741824 bytes, 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/cl-root: 39.7 GB, 39720058880 bytes, 77578240 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/cl-swap: 2147 MB, 2147483648 bytes, 4194304 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

# 开始进行分区
[root@localhost hk]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xca00a0b9.

# m查看帮助
Command (m for help): m
Command action
   a   toggle a bootable flag
   b   edit bsd disklabel
   c   toggle the dos compatibility flag
   d   delete a partition
   g   create a new empty GPT partition table
   G   create an IRIX (SGI) partition table
   l   list known partition types
   m   print this menu
   n   add a new partition
   o   create a new empty DOS partition table
   p   print the partition table
   q   quit without saving changes
   s   create a new empty Sun disklabel
   t   change a partition's system id
   u   change display/entry units
   v   verify the partition table
   w   write table to disk and exit
   x   extra functionality (experts only)
   
#  创建新分区 
Command (m for help): n
Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
 # p 表示创建主分区,e 表示扩展分区
Select (default p): p
Partition number (1-4, default 1): 1    # 分区号选择1,也可以使用默认
First sector (2048-2097151, default 2048):    # 起始节使用默认即可
Using default value 2048
# +400M 表示给分区分配400M 空间,默认分配磁盘所有剩余空间
Last sector, +sectors or +size{K,M,G} (2048-2097151, default 2097151): +400M   
Partition 1 of type Linux and of size 400 MiB is set
# 使用 w 保存
Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

#查看分区情况
[root@localhost hk]# fdisk -l

Disk /dev/sda: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000c44fb

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048     2099199     1048576   83  Linux
/dev/sda2         2099200    83886079    40893440   8e  Linux LVM

Disk /dev/sdb: 1073 MB, 1073741824 bytes, 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xca00a0b9

# 这是我们刚刚分配的分区
   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048      821247      409600   83  Linux

Disk /dev/mapper/cl-root: 39.7 GB, 39720058880 bytes, 77578240 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/cl-swap: 2147 MB, 2147483648 bytes, 4194304 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

# 将新建的分区进行格式化,格式化为 ext3 格式
[root@localhost hk]# mkfs -t ext3 /dev/sdb1
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
102400 inodes, 409600 blocks
20480 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67633152
50 block groups
8192 blocks per group, 8192 fragments per group
2048 inodes per group
Superblock backups stored on blocks: 
        8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409

Allocating group tables: done                            
Writing inode tables: done                            
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done 

#创建挂载目录
[root@localhost hk]# mkdir /mnt/disk2

#将 /dev/sdb1 挂载到 /mnt/disk2
[root@localhost hk]# mount /dev/sdb1 /mnt/disk2/

# 查看分区已经正常挂载
[root@localhost hk]# df -h
Filesystem           Size  Used Avail Use% Mounted on
devtmpfs             463M     0  463M   0% /dev
tmpfs                488M     0  488M   0% /dev/shm
tmpfs                488M   13M  475M   3% /run
tmpfs                488M     0  488M   0% /sys/fs/cgroup
/dev/mapper/cl-root   37G  3.6G   34G  10% /
/dev/sda1           1014M  246M  769M  25% /boot
tmpfs                 98M     0   98M   0% /run/user/1000
/dev/sdb1            380M  2.3M  358M   1% /mnt/disk2   #这里可以看见分区已经正常挂载

# 编辑系统分区表 /etc/fstab 实现开机自动挂载
[root@localhost hk]# vim /etc/fstab 

#
# /etc/fstab
# Created by anaconda on Tue Nov 14 20:59:37 2017
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/cl-root     /                       xfs     defaults        0 0
UUID=03cf4f74-827e-40a1-a67f-2227be43dee7 /boot                   xfs     defaults        0 0
/dev/mapper/cl-swap     swap                    swap    defaults        0 0
/dev/sdb1   /mnt/disk2   ext3   default 0 0    # 将分区信息加到 /etc/fstab 文件末尾,保存并退出

# 切换到分区挂载的目录中,创建文件测试分区是否可用
[root@localhost hk]# cd /mnt/disk2/
[root@localhost disk2]# touch test.txt
[root@localhost disk2]# ls
lost+found  test.txt

Linux命令(二十五) 磁盘管理命令(三) fdisk

标签:enc   windows   gpt   before   writing   for   primary   开始   run   

原文地址:https://www.cnblogs.com/ay-a/p/9193133.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!