码迷,mamicode.com
首页 > 数据库 > 详细

Linux下MySQL 5.7 主从复制(主从同步)

时间:2018-06-27 12:15:52      阅读:205      评论:0      收藏:0      [点我收藏+]

标签:sch   ali   variables   code   避免   inux   count   vim   Opens   

1、说明:

首先要准备两台服务器,一台主服务器(Master),另一台从服务器(Slave),然后要保证Master与Slave的版本要相同且Master不能高于Slave的版本,一般稳健的做法都是使其版本相同,因为MySQL不同版本之间的binlog(二进制日志)格式可能会不一样,最后会导致同步出现异常。

IP 主机名 角色
192.168.1.101 MySQL-001 master
192.168.1.102 MySQL-002 slave

版本:

系统:CentOS 6. 或 7.
MySQL版本:5.7

2、master配置文件设置如下

一般mysql配置文件在/etc/my.cnf

(如果找不到的话也有可能在这些目录下:/etc/mysql/my.cnf,/usr/local/mysql/etc/my.cnf,~/.my.cnf)

[root@MySQL-001 ~]# vim /etc/my.cnf
[mysqld]
basedir=/usr/local/mysql
datadir=/data/mysqldata
socket=/tmp/mysql.sock
user=mysql
port=3306

# master的配置
server-id=1             # 服务器id (主从必须不一样)
binlog-do-db=employees  # 要给从机同步的库
binlog-ignore-db=mysql  # 不给从机同步的库(多个写多行)
binlog-ignore-db=information_schema
binlog-ignore-db=performance_schema
binlog-ignore-db=sys
log-bin=mysql-bin       # 打开日志(主机需要打开),这个mysql-bin也可以自定义;
expire_logs_days=90     # 自动清理 90 天前的log文件,可根据需要修改

重启数据库使配置生效:
CentOS 6.*:

[root@MySQL-001 ~]# service mysqld restart 
[root@MySQL-001 ~]# service mysqld status
 SUCCESS! MySQL running (15607)

CentOS 7.*:

[root@MySQL-001 ~]# systemctl restart  mysqld.service
[root@MySQL-001 ~]# systemctl status mysqld.service
mysqld.service - MySQL Server
   Loaded: loaded (/usr/lib/systemd/system/mysqld.service; enabled)
   Active: active (running) since 四 2018-05-17 11:42:02 CST; 2h 5min ago
     Docs: man:mysqld(8)
        http://dev.mysql.com/doc/refman/en/using-systemd.html
 Main PID: 29959 (mysqld)
   CGroup: /system.slice/mysqld.service
       └─29959 /opt/mysql/bin/mysqld --defaults-file=/etc/my.cnf

5月 17 11:42:02 tcloud-118 systemd[1]: Started MySQL Server.

测试log_bin是否成功开启

[root@MySQL-001 ~]# mysql -uroot -p
mysql> show variables like ‘%log_bin%‘;
+---------------------------------+---------------------------------+
| Variable_name                   | Value                           |
+---------------------------------+---------------------------------+
| log_bin                         | ON                              |
| log_bin_basename                | /opt/mysql/logs/mysql-bin       |
| log_bin_index                   | /opt/mysql/logs/mysql-bin.index |
| log_bin_trust_function_creators | ON                              |
| log_bin_use_v1_row_events       | OFF                             |
| sql_log_bin                     | ON                              |
+---------------------------------+---------------------------------+
6 rows in set (0.00 sec)

mysql>

可以看到log_bin为ON;

3、master的数据库中建立主从同步账号backup:

backup为用户名,192.168.1.%表示只允许192.168.1网段的客户端连接,123456为密码;

mysql> grant replication slave on *.* to ‘backup‘@‘192.168.1.%‘ identified by ‘123456‘;   # 创建同步账户
mysql> flush privileges;                                                                  # 刷新权限
mysql> select Host,User,authentication_string from mysql.user;                            # 检查是否创建
+--------------+---------------+-------------------------------------------+
| Host         | User          | authentication_string                     |
+--------------+---------------+-------------------------------------------+
| localhost    | root          | *6C362347EBEAA7DF44F6D34884615A35095E80EB |
| localhost    | mysql.session | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE |
| localhost    | mysql.sys     | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE |
| 192.168.1.%  | backup        | *9BB58B7F11A03B83C396FF506F3DF45727E79614 |
+--------------+---------------+-------------------------------------------+
5 rows in set (0.00 sec)

mysql>

backup@192.168.1.%账户已建立;

4、Master锁表,往slave拷贝数据

重启MySQL服务并设置读取锁定,读取锁定的意思是只能读取,不能更新,以便获得一个一致性的快照;

mysql> flush table with read lock;     # 主库锁表;默认28800秒,即8小时自动解锁;
mysql> show master status \G
*************************** 1. row ***************************
             File: mysql-bin.000002
         Position: 1621
     Binlog_Do_DB:
 Binlog_Ignore_DB: mysql
Executed_Gtid_Set: 1d3d078c-59a7-11e8-9a08-00163e000b3f:1-7
1 row in set (0.00 sec)

mysql>

查看主服务器上当前的二进制日志名和偏移量值这里的file 和position 要和上面的一致;
导出master(192.168.1.101)上的数据,然后导入slave 中

master:
格式:mysqldump -uUSER -pPASSWORD DATABASE TABLE > NAME.sql

[root@MySQL-001 ~]# mysqldump -uroot -p employees > /opt/employees.sql    # 假如employees为主库已经存在的库
[root@MySQL-001 ~]# yum install openssh-clients -y                        # 可选
[root@MySQL-001 ~]# scp /opt/employees.sql root@192.168.1.102:/opt/

slave:

[root@MySQL-002 ~]# yum install openssh-clients -y                        # 可选

5、配置slave(192.168.1.102)

[root@MySQL-002 ~]# vim /etc/my.cnf
[mysqld]
basedir=/usr/local/mysql    # mysql程序路径
datadir=/data/mysqldata     # mysql数据目录
socket=/tmp/mysql.sock
user=mysql
port=3306

# slave配置
server-id=2                 # MySQLid 后面2个从服务器需设置不同
skip_slave_start=1          # 复制进程不会随着数据库的启动而启动,重启数据库后需手动启动;
#加上以下参数可以避免更新不及时,SLAVE 重启后导致的主从复制出错。
read_only = 1               # 从库普通账户只读;
master_info_repository=TABLE
relay_log_info_repository=TABLE
#relay_log_recovery=1       # 从机禁止写
#super_read_only=1          # 从机禁止写

重启数据库

CentOS 6.*:

[root@MySQL-002 ~]# service mysqld restart 
[root@MySQL-002 ~]# service mysqld status
 SUCCESS! MySQL running (15604)

CentOS 7.*:

[root@MySQL-002 ~]# systemctl restart mysqld.service
[root@MySQL-002 ~]# systemctl status mysqld.service
mysqld.service - MySQL Server
   Loaded: loaded (/usr/lib/systemd/system/mysqld.service; enabled)
   Active: active (running) since 四 2018-05-17 11:42:02 CST; 2h 5min ago
     Docs: man:mysqld(8)
        http://dev.mysql.com/doc/refman/en/using-systemd.html
 Main PID: 29959 (mysqld)
   CGroup: /system.slice/mysqld.service
       └─29959 /opt/mysql/bin/mysqld --defaults-file=/etc/my.cnf

5月 17 11:42:02 tcloud-118 systemd[1]: Started MySQL Server.

然后导入到mysql数据库中,slave上的employees数据库不存在则先创建,然后再导入

[root@MySQL-002 ~]# mysql -uroot -p
mysql> create database employees;        # 新建这个库
[root@MySQL-002 ~]# mysql -uroot -p employees < /opt/employees.sql

登录slave数据库,并做如下设置

[root@MySQL-002 ~]# mysql -uroot -p
mysql> stop slave;                  # 关闭slave同步,第一次可略过;
mysql> change master to
-> master_host=‘192.168.1.101‘,     # master的ip
-> master_user=‘backup‘,            # 备份用户名
-> master_password=‘123456‘,        # 密码
-> master_log_file=‘mysql-bin.000002‘,    # 上面截图,且要与master的参数一致
-> master_log_pos=1621;              # 上面截图,且要与master的参数一致

合写为:

mysql> change master to master_host=‘192.168.1.101‘, master_user=‘backup‘, master_password=‘123456‘, master_log_file=‘mysql-bin.000002‘, master_log_pos=1621;
mysql> start slave;                 # 启动同步
mysql> show slave status \G         # 查看slave从机的状态
*************************** 1. row ***************************
               Slave_IO_State: Waiting for master to send event
                  Master_Host: 192.168.1.101
                  Master_User: backup
                  Master_Port: 3306
                Connect_Retry: 60
              Master_Log_File: mysql-bin.000002
          Read_Master_Log_Pos: 1621
               Relay_Log_File: relay-bin.000002
                Relay_Log_Pos: 320
        Relay_Master_Log_File: mysql-bin.000002
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes
              Replicate_Do_DB:
          Replicate_Ignore_DB: mysql
           Replicate_Do_Table:
       Replicate_Ignore_Table:
      Replicate_Wild_Do_Table:
  Replicate_Wild_Ignore_Table:
                   Last_Errno: 0
                   Last_Error:
                 Skip_Counter: 0
          Exec_Master_Log_Pos: 1621
              Relay_Log_Space: 521
              Until_Condition: None
               Until_Log_File:
                Until_Log_Pos: 0
           Master_SSL_Allowed: No
           Master_SSL_CA_File:
           Master_SSL_CA_Path:
              Master_SSL_Cert:
            Master_SSL_Cipher:
               Master_SSL_Key:
        Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
                Last_IO_Errno: 0
                Last_IO_Error:
               Last_SQL_Errno: 0
               Last_SQL_Error:
  Replicate_Ignore_Server_Ids:
             Master_Server_Id: 101
                  Master_UUID: 1d3d078c-59a7-11e8-9a08-00163e000b3f
             Master_Info_File: mysql.slave_master_info
                    SQL_Delay: 0
          SQL_Remaining_Delay: NULL
      Slave_SQL_Running_State: Slave has read all relay log; waiting for more updates
           Master_Retry_Count: 86400
                  Master_Bind:
      Last_IO_Error_Timestamp:
     Last_SQL_Error_Timestamp:
               Master_SSL_Crl:
           Master_SSL_Crlpath:
           Retrieved_Gtid_Set:
            Executed_Gtid_Set: 5037e479-59a7-11e8-a35b-00163e000402:1-3
                Auto_Position: 0
         Replicate_Rewrite_DB:
                 Channel_Name:
           Master_TLS_Version:
1 row in set (0.00 sec)

mysql>

下面对应参数相同代表设置成功,0延时;

Slave_IO_Running: Yes

Slave_SQL_Running: Yes

Seconds_Behind_Master: 0

6、关闭掉主数据库的读取锁定,并测试

mysql> unlock tables;

在marster中创建一个新表再查看slave中是否有数据

master:

mysql> use employees;
mysql> create table test001(id int auto_increment primary key,name varchar(20) not null);
mysql> insert into test001 values(null,‘will‘);
mysql> insert into test001 values(null,‘jim‘);
mysql> insert into test001 values(null,‘tom‘);
mysql> select * from employees.test001;
+----+------+
| id | name |
+----+------+
|  1 | will |
|  2 | jim  |
|  3 | tom  |
+----+------+
3 rows in set (0.01 sec)

slave:

mysql> use employees;
mysql> select * from employees.test001;
+----+------+
| id | name |
+----+------+
|  1 | will |
|  2 | jim  |
|  3 | tom  |
+----+------+

测试2:重启关闭从数据库,主删除test001表,然后主从数据库都重启看是否正常

master:

mysql> drop table employees.test001;

slave:

mysql> use employees;
mysql> show tables;

以上实验证明主从同步成功!!!

Linux下MySQL 5.7 主从复制(主从同步)

标签:sch   ali   variables   code   避免   inux   count   vim   Opens   

原文地址:http://blog.51cto.com/moerjinrong/2133121

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!