Windows 批处理网卡设置

 1 @echo OFF //不显示后续命令行及当前命令行
 2  
 3 set netname="要修改的网络的名字"
 4 set ip=XXX.XXX.XXX.XXX
 5 set subnetmask=XXX.XXX.XXX.XXX
 6 set gateway=XXX.XXX.XXX.XXX
 7 set dns1=XXX.XXX.XXX.XXX
 8 set dns2=XXX.XXX.XXX.XXX
 9  
10 @netsh interface ip set address name=%netname% source=static addr=%ip% mask=%subnetmask% gateway=%gateway% gwmetric=1 //默认网关的跃点数
11 @netsh interface ip set dns name=%netname% source=static addr=%dns1% primary //主要的
12 @netsh interface ip add dns name=%netname% addr=%dns2% index=2 //为指定的DNS服务器地址

1 @echo OFF
2  
3 set netname="以太网"
4  
5 @netsh interface ip set address name=%netname% source=dhcp
6 @netsh interface ip set dns name=%netname% source=dhcp