标签：rem 系统信息 mod bsp word nal evel not work build
Cmake安装mysql-5.5.32
一、查看系统信息
[root@mysql ~]# cat /etc/redhat-release
CentOS release 6.7 (Final)
[root@mysql ~]# uname -r
2.6.32-573.el6.x86_64
二、安装环境准备
[root@mysql ~]# mkdir /tools
rz上传cmake、mysql源码包
[root@mysql ~]# ls /tools/
cmake-2.8.8.tar.gz mysql-5.5.32.tar.gz
[root@mysql tools]# tar xf cmake-2.8.8.tar.gz
[root@mysql tools]# cd cmake-2.8.8
[root@mysql cmake-2.8.8]# ./configure
-- Searching 16 bit integer
-- Check size of unsigned short
-- Check size of unsigned short - done
-- Using unsigned short
-- Check if the system is big endian - little endian
-- Looking for wsyncup in /usr/lib64/libcurses.so
-- Looking for wsyncup in /usr/lib64/libcurses.so - found
-- Looking for elf.h
-- Looking for elf.h - found
-- Enable ninja generator.
-- Looking for a Fortran compiler
-- Looking for a Fortran compiler - /usr/bin/f95
-- Could NOT find Qt4 (missing: QT_QMAKE_EXECUTABLE QT_MOC_EXECUTABLE QT_RCC_EXECUTABLE QT_UIC_EXECUTABLE QT_INCLUDE_DIR QT_LIBRARY_DIR QT_QTCORE_LIBRARY)
-- Configuring done
-- Generating done
-- Build files have been written to: /tools/cmake-2.8.8
---------------------------------------------
CMake has bootstrapped. Now run gmake.
[root@mysql cmake-2.8.8]# gmake
[ 99%] Built target CMakeLibTests
Scanning dependencies of target runcompilecommands
[100%] Building CXX object Tests/CMakeLib/CMakeFiles/runcompilecommands.dir/run_compile_commands.cxx.o
Linking CXX executable runcompilecommands
[100%] Built target runcompilecommands
Scanning dependencies of target foo
[100%] Building CXX object Tests/FindPackageModeMakefileTest/CMakeFiles/foo.dir/foo.cpp.o
Linking CXX static library libfoo.a
[100%] Built target foo
[root@mysql cmake-2.8.8]# gmake install
-- Installing: /usr/local/doc/cmake-2.8/cmake-policies.txt
-- Installing: /usr/local/doc/cmake-2.8/cmake-properties.txt
-- Installing: /usr/local/doc/cmake-2.8/cmake-variables.txt
-- Installing: /usr/local/doc/cmake-2.8/cmake-modules.txt
-- Installing: /usr/local/doc/cmake-2.8/cmake-commands.txt
-- Installing: /usr/local/doc/cmake-2.8/cmake-compatcommands.txt
-- Installing: /usr/local/doc/cmake-2.8/ctest.txt
-- Installing: /usr/local/doc/cmake-2.8/ctest.docbook
-- Installing: /usr/local/doc/cmake-2.8/cpack.txt
-- Installing: /usr/local/doc/cmake-2.8/cpack.docbook
-- Installing: /usr/local/doc/cmake-2.8/ccmake.txt
-- Installing: /usr/local/doc/cmake-2.8/ccmake.docbook
-- Installing: /usr/local/share/aclocal/cmake.m4
[root@mysql cmake-2.8.8]# echo $?
0 #####验证安装成功
Cmake安装成功，下一步安装mysql，首先安装mysql依赖包
[root@mysql cmake-2.8.8]# yum -y install ncurses-devel libaio-devel
[root@mysql ~]# useradd mysql -s /sbin/nologin -M
[root@mysql tools]# tar xf mysql-5.5.32.tar.gz
[root@mysql tools]# ls
cmake-2.8.8 cmake-2.8.8.tar.gz mysql-5.5.32 mysql-5.5.32.tar.gz
[root@mysql tools]# cd mysql-5.5.32
[root@mysql mysql-5.5.32]# cmake . -DCMAKE_INSTALL_PREFIX=/app/mysql-5.5.32 \
> -DMYSQL_DATADIR=/app/mysql-5.5.32/data \
> -DMYSQL_UNIX_ADDR=/app/mysql-5.5.32/tmp/mysql.sock \
> -DEXTRA_CHARSETS=gbk,gb2312,utf8,ascii \
> -DENABLED_LOCAL_INFILE=ON \
> -DWITH_INNOBASE_STORAGE_ENGINE=1 \
> -DWITH_FEDERATED_STORAGE_ENGINE=1 \
> -DWITH_BLACKHOLE_STORAGE_ENGINE=1 \
> -DWITHOUT_EXAMPLE_STORAGE_ENGINE=1 \
> -DWITHOUT_PARTITION_STORAGE_ENGINE=1 \
> -DWITH_FAST_MUTEXES=1 \
> -DWITH_ZLIB=bundled \
> -DENABLED_LOCAL_INFILE=1 \
> -DWITH_READLINE=1 \
> -DWITH_EMBEDDED_SERVER=1 \
> -DWITH_DEBUG=0
-- Found Curses: /usr/lib64/libcurses.so
-- Looking for tputs in /usr/lib64/libcurses.so
-- Looking for tputs in /usr/lib64/libcurses.so - found
-- Looking for include file libaio.h
-- Looking for include file libaio.h - found
-- Looking for io_queue_init in aio
-- Looking for io_queue_init in aio - found
-- Performing Test HAVE_IB_GCC_ATOMIC_BUILTINS
-- Performing Test HAVE_IB_GCC_ATOMIC_BUILTINS - Success
-- Performing Test HAVE_IB_ATOMIC_PTHREAD_T_GCC
-- Performing Test HAVE_IB_ATOMIC_PTHREAD_T_GCC - Success
-- Check size of pthread_t
-- Check size of pthread_t - done
-- Performing Test HAVE_PEERCRED
-- Performing Test HAVE_PEERCRED - Success
-- Configuring done
-- Generating done
-- Build files have been written to: /tools/mysql-5.5.32
[root@mysql mysql-5.5.32]#
[root@mysql mysql-5.5.32]# make && make install
-- Installing: /app/mysql-5.5.32/man/man1/mysql_find_rows.1
-- Installing: /app/mysql-5.5.32/man/man1/myisamchk.1
-- Installing: /app/mysql-5.5.32/man/man1/mysql_install_db.1
-- Installing: /app/mysql-5.5.32/man/man1/mysql.server.1
-- Installing: /app/mysql-5.5.32/man/man1/myisam_ftdump.1
-- Installing: /app/mysql-5.5.32/man/man1/mysqlslap.1
-- Installing: /app/mysql-5.5.32/man/man1/comp_err.1
-- Installing: /app/mysql-5.5.32/man/man1/mysql_plugin.1
-- Installing: /app/mysql-5.5.32/man/man1/my_print_defaults.1
-- Installing: /app/mysql-5.5.32/man/man1/mysqladmin.1
-- Installing: /app/mysql-5.5.32/man/man1/mysqlbinlog.1
-- Installing: /app/mysql-5.5.32/man/man1/mysql_fix_extensions.1
-- Installing: /app/mysql-5.5.32/man/man1/resolve_stack_dump.1
-- Installing: /app/mysql-5.5.32/man/man8/mysqld.8
-- Installing: /app/mysql-5.5.32/support-files/solaris/postinstall-solaris
安装成功后，创建软连接
[root@mysql /]# ln -s /app/mysql-5.5.32/ /app/mysql
[root@mysql /]# ll /app
total 4
lrwxrwxrwx 1 root root 18 Sep 8 14:53 mysql -> /app/mysql-5.5.32/
drwxr-xr-x 13 root root 4096 Sep 8 14:51 mysql-5.5.32
备份my.cnf
[root@mysql /]# ls /etc/my.cnf
/etc/my.cnf
[root@mysql /]# mv /etc/my.cnf /etc/my.cnf.bak
[root@mysql mysql-5.5.32]# \cp support-files/my-small.cnf /etc/my.cnf
[root@mysql mysql-5.5.32]# chown -R mysql.mysql /app/mysql/data
###授权mysql管理
[root@mysql mysql-5.5.32]#echo ‘PAHT=/app/mysql/bin:$PATH‘ >> /etc/profile
[root@mysql mysql-5.5.32]#. /etc/profile
###修改全局路径，并生效
下一步初始化数据库
[root@mysql mysql-5.5.32]# cd /app/mysql/scripts/
[root@mysql scripts]# ./mysql_install_db --basedir=/app/mysql --datadir=/app/mysql/data/ --user=mysql
#####加./ 是为了避免初始化过程中系统执行默认路径的mysql_install_db
WARNING: The host ‘mysql‘ could not be looked up with resolveip.
This probably means that your libc libraries are not 100 % compatible
with this binary MySQL version. The MySQL daemon, mysqld, should work
normally with the exception that host name resolving will not work.
This means that you should use IP addresses instead of hostnames
when specifying MySQL privileges !
Installing MySQL system tables...
OK
Filling help tables...
OK
To start mysqld at boot time you have to copy
support-files/mysql.server to the right place for your system
PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
To do so, start the server, then issue the following commands:
/app/mysql/bin/mysqladmin -u root password ‘new-password‘
/app/mysql/bin/mysqladmin -u root -h mysql password ‘new-password‘
Alternatively you can run:
/app/mysql/bin/mysql_secure_installation
which will also give you the option of removing the test
databases and anonymous user created by default. This is
strongly recommended for production servers.
See the manual for more instructions.
You can start the MySQL daemon with:
cd /app/mysql ; /app/mysql/bin/mysqld_safe &
You can test the MySQL daemon with mysql-test-run.pl
cd /app/mysql/mysql-test ; perl mysql-test-run.pl
Please report any problems with the /app/mysql/scripts/mysqlbug script!
出现两个ok代表初始化成功
[root@mysql scripts]# cd /tools/mysql-5.5.32
[root@mysql mysql-5.5.32]# \cp support-files/mysql.server /etc/init.d/mysqld
[root@mysql mysql-5.5.32]# chmod +x /etc/init.d/mysqld
[root@mysql mysql-5.5.32]# /etc/init.d/mysqld start
Starting MySQL...
Mysql安装完毕，并启动成功
Cmake安装mysql-5.5.32
一、查看系统信息
[root@mysql ~]# cat /etc/redhat-release
CentOS release 6.7 (Final)
[root@mysql ~]# uname -r
2.6.32-573.el6.x86_64
二、安装环境准备
[root@mysql ~]# mkdir /tools
rz上传cmake、mysql源码包
[root@mysql ~]# ls /tools/
cmake-2.8.8.tar.gz mysql-5.5.32.tar.gz
[root@mysql tools]# tar xf cmake-2.8.8.tar.gz
[root@mysql tools]# cd cmake-2.8.8
[root@mysql cmake-2.8.8]# ./configure
-- Searching 16 bit integer
-- Check size of unsigned short
-- Check size of unsigned short - done
-- Using unsigned short
-- Check if the system is big endian - little endian
-- Looking for wsyncup in /usr/lib64/libcurses.so
-- Looking for wsyncup in /usr/lib64/libcurses.so - found
-- Looking for elf.h
-- Looking for elf.h - found
-- Enable ninja generator.
-- Looking for a Fortran compiler
-- Looking for a Fortran compiler - /usr/bin/f95
-- Could NOT find Qt4 (missing: QT_QMAKE_EXECUTABLE QT_MOC_EXECUTABLE QT_RCC_EXECUTABLE QT_UIC_EXECUTABLE QT_INCLUDE_DIR QT_LIBRARY_DIR QT_QTCORE_LIBRARY)
-- Configuring done
-- Generating done
-- Build files have been written to: /tools/cmake-2.8.8
---------------------------------------------
CMake has bootstrapped. Now run gmake.
[root@mysql cmake-2.8.8]# gmake
[ 99%] Built target CMakeLibTests
Scanning dependencies of target runcompilecommands
[100%] Building CXX object Tests/CMakeLib/CMakeFiles/runcompilecommands.dir/run_compile_commands.cxx.o
Linking CXX executable runcompilecommands
[100%] Built target runcompilecommands
Scanning dependencies of target foo
[100%] Building CXX object Tests/FindPackageModeMakefileTest/CMakeFiles/foo.dir/foo.cpp.o
Linking CXX static library libfoo.a
[100%] Built target foo
[root@mysql cmake-2.8.8]# gmake install
-- Installing: /usr/local/doc/cmake-2.8/cmake-policies.txt
-- Installing: /usr/local/doc/cmake-2.8/cmake-properties.txt
-- Installing: /usr/local/doc/cmake-2.8/cmake-variables.txt
-- Installing: /usr/local/doc/cmake-2.8/cmake-modules.txt
-- Installing: /usr/local/doc/cmake-2.8/cmake-commands.txt
-- Installing: /usr/local/doc/cmake-2.8/cmake-compatcommands.txt
-- Installing: /usr/local/doc/cmake-2.8/ctest.txt
-- Installing: /usr/local/doc/cmake-2.8/ctest.docbook
-- Installing: /usr/local/doc/cmake-2.8/cpack.txt
-- Installing: /usr/local/doc/cmake-2.8/cpack.docbook
-- Installing: /usr/local/doc/cmake-2.8/ccmake.txt
-- Installing: /usr/local/doc/cmake-2.8/ccmake.docbook
-- Installing: /usr/local/share/aclocal/cmake.m4
[root@mysql cmake-2.8.8]# echo $?
0 #####验证安装成功
Cmake安装成功，下一步安装mysql，首先安装mysql依赖包
[root@mysql cmake-2.8.8]# yum -y install ncurses-devel libaio-devel
[root@mysql ~]# useradd mysql -s /sbin/nologin -M
[root@mysql tools]# tar xf mysql-5.5.32.tar.gz
[root@mysql tools]# ls
cmake-2.8.8 cmake-2.8.8.tar.gz mysql-5.5.32 mysql-5.5.32.tar.gz
[root@mysql tools]# cd mysql-5.5.32
[root@mysql mysql-5.5.32]# cmake . -DCMAKE_INSTALL_PREFIX=/app/mysql-5.5.32 \
> -DMYSQL_DATADIR=/app/mysql-5.5.32/data \
> -DMYSQL_UNIX_ADDR=/app/mysql-5.5.32/tmp/mysql.sock \
> -DEXTRA_CHARSETS=gbk,gb2312,utf8,ascii \
> -DENABLED_LOCAL_INFILE=ON \
> -DWITH_INNOBASE_STORAGE_ENGINE=1 \
> -DWITH_FEDERATED_STORAGE_ENGINE=1 \
> -DWITH_BLACKHOLE_STORAGE_ENGINE=1 \
> -DWITHOUT_EXAMPLE_STORAGE_ENGINE=1 \
> -DWITHOUT_PARTITION_STORAGE_ENGINE=1 \
> -DWITH_FAST_MUTEXES=1 \
> -DWITH_ZLIB=bundled \
> -DENABLED_LOCAL_INFILE=1 \
> -DWITH_READLINE=1 \
> -DWITH_EMBEDDED_SERVER=1 \
> -DWITH_DEBUG=0
-- Found Curses: /usr/lib64/libcurses.so
-- Looking for tputs in /usr/lib64/libcurses.so
-- Looking for tputs in /usr/lib64/libcurses.so - found
-- Looking for include file libaio.h
-- Looking for include file libaio.h - found
-- Looking for io_queue_init in aio
-- Looking for io_queue_init in aio - found
-- Performing Test HAVE_IB_GCC_ATOMIC_BUILTINS
-- Performing Test HAVE_IB_GCC_ATOMIC_BUILTINS - Success
-- Performing Test HAVE_IB_ATOMIC_PTHREAD_T_GCC
-- Performing Test HAVE_IB_ATOMIC_PTHREAD_T_GCC - Success
-- Check size of pthread_t
-- Check size of pthread_t - done
-- Performing Test HAVE_PEERCRED
-- Performing Test HAVE_PEERCRED - Success
-- Configuring done
-- Generating done
-- Build files have been written to: /tools/mysql-5.5.32
[root@mysql mysql-5.5.32]#
[root@mysql mysql-5.5.32]# make && make install
-- Installing: /app/mysql-5.5.32/man/man1/mysql_find_rows.1
-- Installing: /app/mysql-5.5.32/man/man1/myisamchk.1
-- Installing: /app/mysql-5.5.32/man/man1/mysql_install_db.1
-- Installing: /app/mysql-5.5.32/man/man1/mysql.server.1
-- Installing: /app/mysql-5.5.32/man/man1/myisam_ftdump.1
-- Installing: /app/mysql-5.5.32/man/man1/mysqlslap.1
-- Installing: /app/mysql-5.5.32/man/man1/comp_err.1
-- Installing: /app/mysql-5.5.32/man/man1/mysql_plugin.1
-- Installing: /app/mysql-5.5.32/man/man1/my_print_defaults.1
-- Installing: /app/mysql-5.5.32/man/man1/mysqladmin.1
-- Installing: /app/mysql-5.5.32/man/man1/mysqlbinlog.1
-- Installing: /app/mysql-5.5.32/man/man1/mysql_fix_extensions.1
-- Installing: /app/mysql-5.5.32/man/man1/resolve_stack_dump.1
-- Installing: /app/mysql-5.5.32/man/man8/mysqld.8
-- Installing: /app/mysql-5.5.32/support-files/solaris/postinstall-solaris
安装成功后，创建软连接
[root@mysql /]# ln -s /app/mysql-5.5.32/ /app/mysql
[root@mysql /]# ll /app
total 4
lrwxrwxrwx 1 root root 18 Sep 8 14:53 mysql -> /app/mysql-5.5.32/
drwxr-xr-x 13 root root 4096 Sep 8 14:51 mysql-5.5.32
备份my.cnf
[root@mysql /]# ls /etc/my.cnf
/etc/my.cnf
[root@mysql /]# mv /etc/my.cnf /etc/my.cnf.bak
[root@mysql mysql-5.5.32]# \cp support-files/my-small.cnf /etc/my.cnf
[root@mysql mysql-5.5.32]# chown -R mysql.mysql /app/mysql/data
###授权mysql管理
[root@mysql mysql-5.5.32]#echo ‘PAHT=/app/mysql/bin:$PATH‘ >> /etc/profile
[root@mysql mysql-5.5.32]#. /etc/profile
###修改全局路径，并生效
下一步初始化数据库
[root@mysql mysql-5.5.32]# cd /app/mysql/scripts/
[root@mysql scripts]# ./mysql_install_db --basedir=/app/mysql --datadir=/app/mysql/data/ --user=mysql
#####加./ 是为了避免初始化过程中系统执行默认路径的mysql_install_db
WARNING: The host ‘mysql‘ could not be looked up with resolveip.
This probably means that your libc libraries are not 100 % compatible
with this binary MySQL version. The MySQL daemon, mysqld, should work
normally with the exception that host name resolving will not work.
This means that you should use IP addresses instead of hostnames
when specifying MySQL privileges !
Installing MySQL system tables...
OK
Filling help tables...
OK
To start mysqld at boot time you have to copy
support-files/mysql.server to the right place for your system
PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
To do so, start the server, then issue the following commands:
/app/mysql/bin/mysqladmin -u root password ‘new-password‘
/app/mysql/bin/mysqladmin -u root -h mysql password ‘new-password‘
Alternatively you can run:
/app/mysql/bin/mysql_secure_installation
which will also give you the option of removing the test
databases and anonymous user created by default. This is
strongly recommended for production servers.
See the manual for more instructions.
You can start the MySQL daemon with:
cd /app/mysql ; /app/mysql/bin/mysqld_safe &
You can test the MySQL daemon with mysql-test-run.pl
cd /app/mysql/mysql-test ; perl mysql-test-run.pl
Please report any problems with the /app/mysql/scripts/mysqlbug script!
出现两个ok代表初始化成功
[root@mysql scripts]# cd /tools/mysql-5.5.32
[root@mysql mysql-5.5.32]# \cp support-files/mysql.server /etc/init.d/mysqld
[root@mysql mysql-5.5.32]# chmod +x /etc/init.d/mysqld
[root@mysql mysql-5.5.32]# /etc/init.d/mysqld start
Starting MySQL...
Mysql安装完毕，并启动成功
CentOS6.7通过cmake编译安装mysql5.5.32
标签：rem 系统信息 mod bsp word nal evel not work build
原文地址：https://www.cnblogs.com/joolearn/p/9610143.html
