码迷,mamicode.com
首页 > 系统相关 > 详细

Linux Centos7 keepalived + nginx负载均衡

时间:2019-09-12 09:57:52      阅读:93      评论:0      收藏:0      [点我收藏+]

标签:usr   router   proxy   lin   nopreempt   linu   str   dfa   ade   

首先需要服务器关都闭防火墙和selinux

1,准备四台nginx服务器,两台做代理,两台做后端真实服务器。

2,配置两台真实服务器
第一台:

    [root@vm-4 ~]# systemctl start nginx
    [root@vm-4 ~]# systemctl enable nginx
    [root@vm-4 conf.d]# echo "server111" > /usr/share/nginx/html/index.html
    测试:
    [root@vm-4 conf.d]# curl localhost
    server111

第二台:

    [root@vm-5 ~]# systemctl start nginx
    [root@vm-5 ~]# systemctl enable nginx
    [root@vm-5 conf.d]# echo "server222" > /usr/share/nginx/html/index.html
    测试:
    [root@vm-5 conf.d]# curl localhost
    server222

3,配置两台nginx代理服务器

    [root@vm-2 ~]# systemctl start nginx
    [root@vm-2 ~]# systemctl enable nginx
    [root@vm-2 ~]# cd /etc/nginx/conf.d/
    [root@vm-2 conf.d]# cp default.conf proxy.conf
    [root@vm-2 conf.d]# mv default.conf default.conf.bak
    [root@vm-2 conf.d]# vi upstream.conf
    upstream nginx_pool {
    server 10.30.161.241:80 weight=1 max_fails=2 fail_timeout=2;
    server 10.30.161.242:80 weight=1 max_fails=2 fail_timeout=2;
    }
    [root@vm-2 conf.d]# vi proxy.conf 
     location / {
     proxy_pass http://nginx_pool;
     proxy_redirect default;
     proxy_set_header Host $http_host;
     proxy_set_header X-Real-IP $remote_addr;
     proxy_set_header REMOTE-HOST $remote_addr;
     proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
    }

将nginx的配置文件拷贝到另一台代理服务器中:

   [root@vm-2 conf.d]# scp proxy.conf upstream.conf 10.30.161.214:/etc/nginx/conf.d/
    分别重启nginx:
    systemctl restart nginx

4, 两台代理服务器分别安装软件

    master:
    [root@vm-2 conf.d]# yum install -y keepalived
    [root@vm-2 conf.d]# cp /etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf.bak
    [root@vm-2 conf.d]# vim /etc/keepalived/keepalived.conf

配置keepalived,将里面内容全部删除,添加下列内容:

! Configuration File for keepalived
global_defs {
     router_id director1   #辅助改为director2
}

vrrp_instance VI_1 {
        state MASTER        #定义主还是备
        interface ens33     #VIP绑定接口
        virtual_router_id 80  #整个集群的调度器一致
        priority 100         #back改为50
        advert_int 1
        authentication {
                auth_type PASS
                auth_pass 1111
        }
        virtual_ipaddress {
                10.30.161.200/24   #设置VIP
        }
}
                backup:
                [root@yum_nginx ~]# cp /etc/keepalived/keepalived.conf
                [root@yum_nginx ~]# vi /etc/keepalived/keepalived.conf
                配置keepalived,将里面内容全部删除,添加下列内容:  
! Configuration File for keepalived

global_defs {
     router_id directory2
}

vrrp_instance VI_1 {   
        state BACKUP    
        interface ens33  
        nopreempt        
        virtual_router_id 80  
        priority 50   
        advert_int 1   
        authentication {  
                auth_type PASS
                auth_pass 1111
        }
        virtual_ipaddress {
                10.30.161.200/24
        }
}

5、两台代理服务器分别启动keepalived

    [root@yum_nginx ~]# systemctl enable keepalived.service
    [root@yum_nginx ~]# systemctl start keepalived.service

6、检测是否成功

   在master上 ip a  可显示VIP为10.30.161.200/24
  2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:29:a6:12 brd ff:ff:ff:ff:ff:ff
inet 10.30.161.51/24 brd 10.30.161.255 scope global dynamic ens33
   valid_lft 168379sec preferred_lft 168379sec
inet 10.30.161.200/24 scope global secondary ens33
   valid_lft forever preferred_lft forever
inet6 fe80::8cfe:8d87:6478:baee/64 scope link 
   valid_lft forever preferred_lft forever
inet6 fe80::d9c7:8228:5b45:afed/64 scope link tentative dadfailed 
   valid_lft forever preferred_lft forever

用curl访问VIP,正常轮询

[root@vm-5 conf.d]# curl 10.30.161.200
server111
[root@vm-5 conf.d]# curl 10.30.161.200
server222
[root@vm-5 conf.d]# curl 10.30.161.200
server111
[root@vm-5 conf.d]# curl 10.30.161.200
server222
 测试当一台master故障
 [root@vm-2 conf.d]# systemctl stop keepalived
 ip a 发现VIP偏移到backup代理服务器上

到此:
可以解决心跳故障keepalived
但不能解决Nginx服务故障

  1. 扩展对调度器Nginx健康检查(可选)两台都设置
    思路:
    让Keepalived以一定时间间隔执行一个外部脚本,脚本的功能是当Nginx失败,则关闭本机的Keepalived
    (1) script

    [root@nginx-proxy-master ~]# vim /etc/keepalived/check_nginx_status.sh

    #!/bin/bash
    #+检查nginx进程是否存在
    counter=$(ps -C nginx --no-heading|wc -l) #此行有服务名
    if [ "${counter}" = "0" ]; then
    #尝试启动一次nginx,停止5秒后再次检测
    systemctl start nginx #启动服务
    sleep 5
    counter=$(ps -C nginx --no-heading|wc -l) #此行有服务名
    if [ "${counter}" = "0" ]; then
    #如果启动没成功,就杀掉keepalive触发主备切换
    service keepalived stop
    fi
    fi
    [root@nginx-proxy-master ~]# chmod a+x /etc/keepalived/check_nginx_status.sh

(2). keepalived使用script

! Configuration File for keepalived

global_defs {
     router_id director1
}
vrrp_script check_nginx {     #健康检测模块调用
     script "/etc/keepalived/check_nginx_status.sh"  #指定脚本
     interval 5  #检查频率,秒
}

vrrp_instance VI_1 {
        state MASTER
        interface ens33
        virtual_router_id 80
        priority 100
        advert_int 1
        authentication {  
                auth_type PASS
                auth_pass 1111
        }
        virtual_ipaddress {
                192.168.246.16/24
        }
        track_script { 引用脚本
                check_nginx
        }
}

注:必须先启动nginx,再启动keepalived

Linux Centos7 keepalived + nginx负载均衡

标签:usr   router   proxy   lin   nopreempt   linu   str   dfa   ade   

原文地址:https://blog.51cto.com/14482279/2437601

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!