码迷,mamicode.com
首页 > Web开发 > 详细

selenium webdriver 执行原理

时间:2020-07-23 22:41:04      阅读:193      评论:0      收藏:0      [点我收藏+]

标签:must   hot   htm   could   from   stay   connect   use   LEDE   

selenium webdriver源码结构
Python版的源码结构,只看webdriver相关
selenium-master\py\selenium\webdriver\remote 下的文件

|-- command.py 命令相关
|-- errorhandler.py 错误处理
|-- file_detector.py 文件标识
|-- mobile.py 手机相关
|-- remote_connection.py 远程连接driver 服务端
|-- switch_to.py 切换alert相关
|-- utils.py 公用类
|-- webdriver.py webdriver客户端
|-- webelement.py 解析dom元素
|-- __init__.py

启动流程:
1.一般是初始化一个webdriver实例,以chrome driver 为例看源码可知chrome driver 都是继承remotedriver的,如下代码所示
class WebDriver(RemoteWebDriver):
    """
    Controls the ChromeDriver and allows you to drive the browser.

    You will need to download the ChromeDriver executable from
    http://chromedriver.storage.googleapis.com/index.html
    """

    def __init__(self, executable_path="chromedriver", port=DEFAULT_PORT,
                 options=None, service_args=None,
                 desired_capabilities=None, service_log_path=DEFAULT_SERVICE_LOG_PATH,
                 chrome_options=None, service=None, keep_alive=True):
        """
        Creates a new instance of the chrome driver.

        Starts the service and then creates new instance of chrome driver.

        :Args:
         - executable_path - Deprecated: path to the executable. If the default is used it assumes the executable is in the $PATH
         - port - Deprecated: port you would like the service to run, if left as 0, a free port will be found.
         - options - this takes an instance of ChromeOptions
         - service_args - Deprecated: List of args to pass to the driver service
         - desired_capabilities - Deprecated: Dictionary object with non-browser specific
           capabilities only, such as "proxy" or "loggingPref".
         - service_log_path - Deprecated: Where to log information from the driver.
         - keep_alive - Whether to configure ChromeRemoteConnection to use HTTP keep-alive.
        """

        #检查各个参数
        if executable_path != ‘chromedriver‘:
            warnings.warn(‘executable_path has been deprecated, please pass in a Service object‘,
                          DeprecationWarning, stacklevel=2)
        if desired_capabilities is not None:
            warnings.warn(‘desired_capabilities has been deprecated, please pass in a Service object‘,
                          DeprecationWarning, stacklevel=2)
        if port != DEFAULT_PORT:
            warnings.warn(‘port has been deprecated, please pass in a Service object‘,
                          DeprecationWarning, stacklevel=2)
        self.port = port
        if service_log_path != DEFAULT_SERVICE_LOG_PATH:
            warnings.warn(‘service_log_path has been deprecated, please pass in a Service object‘,
                          DeprecationWarning, stacklevel=2)

        if chrome_options:
            warnings.warn(‘use options instead of chrome_options‘,
                          DeprecationWarning, stacklevel=2)
            options = chrome_options

        if options is None:
            # desired_capabilities stays as passed in
            if desired_capabilities is None:
                desired_capabilities = self.create_options().to_capabilities()
        else:
            if desired_capabilities is None:
                desired_capabilities = options.to_capabilities()
            else:
                desired_capabilities.update(options.to_capabilities())

        if service:
            self.service = service
        else:
            #在本地启动webdriver,port如果没指定则为随机端口
            self.service = Service(
                executable_path,
                port=port,
                service_args=service_args,
                log_path=service_log_path)
        self.service.start()

        try:
            #RemoteWebDriver 初始化
            RemoteWebDriver.__init__(
                self,
                command_executor=ChromeRemoteConnection(
                    remote_server_addr=self.service.service_url,
                    keep_alive=keep_alive),
                desired_capabilities=desired_capabilities)
        except Exception:
            self.quit()
            raise
        self._is_remote = False
接着看RemoteWebDriver 源码:
class WebDriver(object):
    """
    Controls a browser by sending commands to a remote server.
    This server is expected to be running the WebDriver wire protocol
    as defined at
    https://github.com/SeleniumHQ/selenium/wiki/JsonWireProtocol

    :Attributes:
     - session_id - String ID of the browser session started and controlled by this WebDriver.
     - capabilities - Dictionary of effective capabilities of this browser session as returned
         by the remote server. See https://github.com/SeleniumHQ/selenium/wiki/DesiredCapabilities
     - command_executor - remote_connection.RemoteConnection object used to execute commands.
     - error_handler - errorhandler.ErrorHandler object used to handle errors.
    """

    _web_element_cls = WebElement

    def __init__(self, command_executor=‘http://127.0.0.1:4444/wd/hub‘,
                 desired_capabilities=None, browser_profile=None, proxy=None,
                 keep_alive=True, file_detector=None, options=None):
        """
        Create a new driver that will issue commands using the wire protocol.

        :Args:
         - command_executor - Either a string representing URL of the remote server or a custom
             remote_connection.RemoteConnection object. Defaults to ‘http://127.0.0.1:4444/wd/hub‘.
         - desired_capabilities - A dictionary of capabilities to request when
             starting the browser session. Required parameter.
         - browser_profile - A selenium.webdriver.firefox.firefox_profile.FirefoxProfile object.
             Only used if Firefox is requested. Optional.
         - proxy - A selenium.webdriver.common.proxy.Proxy object. The browser session will
             be started with given proxy settings, if possible. Optional.
         - keep_alive - Whether to configure remote_connection.RemoteConnection to use
             HTTP keep-alive. Defaults to True.
         - file_detector - Pass custom file detector object during instantiation. If None,
             then default LocalFileDetector() will be used.
         - options - instance of a driver options.Options class
        """
        capabilities = {}
        if options is not None:
            capabilities = options.to_capabilities()
        if desired_capabilities is not None:
            if not isinstance(desired_capabilities, dict):
                raise WebDriverException("Desired Capabilities must be a dictionary")
            else:
                capabilities.update(desired_capabilities)
        self.command_executor = command_executor
        if type(self.command_executor) is bytes or isinstance(self.command_executor, str):
            #初始化一个webdriver的连接
            self.command_executor = RemoteConnection(command_executor, keep_alive=keep_alive)
        self._is_remote = True
        self.session_id = None
        self.capabilities = {}
        self.error_handler = ErrorHandler()
        self.start_client()
        self.start_session(capabilities, browser_profile)
        self._switch_to = SwitchTo(self)
        self._mobile = Mobile(self)
        self.file_detector = file_detector or LocalFileDetector()

    ........

2.webdriver实例化之后可以调用其方法,以 find_element_by_id讲解

    def find_element_by_id(self, id_):
    """Finds an element by id.

    :Args:
     - id\\_ - The id of the element to be found.

    :Returns:
     - WebElement - the element if it was found

    :Raises:
     - NoSuchElementException - if the element wasn‘t found

    :Usage:
        ::

            element = driver.find_element_by_id(‘foo‘)
    """
    return self.find_element(by=By.ID, value=id_)
    
    

    #主要是这个方法
       def find_element(self, by=By.ID, value=None):
          .....

        return self.execute(Command.FIND_ELEMENT, {
            ‘using‘: by,
            ‘value‘: value})[‘value‘]
              
 #command.py中的所有命令
                STATUS = "status"
                NEW_SESSION = "newSession"
                GET_ALL_SESSIONS = "getAllSessions"
                DELETE_SESSION = "deleteSession"
                NEW_WINDOW = "newWindow"
                CLOSE = "close"
                QUIT = "quit"
                GET = "get"
                GO_BACK = "goBack"
                GO_FORWARD = "goForward"
                REFRESH = "refresh"
                ADD_COOKIE = "addCookie"
                GET_COOKIE = "getCookie"
                GET_ALL_COOKIES = "getCookies"
                DELETE_COOKIE = "deleteCookie"
                DELETE_ALL_COOKIES = "deleteAllCookies"
                FIND_ELEMENT = "findElement"
                FIND_ELEMENTS = "findElements"
                FIND_CHILD_ELEMENT = "findChildElement"
                FIND_CHILD_ELEMENTS = "findChildElements"
                CLEAR_ELEMENT = "clearElement"
                CLICK_ELEMENT = "clickElement"
                SEND_KEYS_TO_ELEMENT = "sendKeysToElement"
                SEND_KEYS_TO_ACTIVE_ELEMENT = "sendKeysToActiveElement"
                SUBMIT_ELEMENT = "submitElement"
                UPLOAD_FILE = "uploadFile"
                GET_CURRENT_WINDOW_HANDLE = "getCurrentWindowHandle"
                W3C_GET_CURRENT_WINDOW_HANDLE = "w3cGetCurrentWindowHandle"
                GET_WINDOW_HANDLES = "getWindowHandles"
                W3C_GET_WINDOW_HANDLES = "w3cGetWindowHandles"
                GET_WINDOW_SIZE = "getWindowSize"
                W3C_GET_WINDOW_SIZE = "w3cGetWindowSize"
                ......

        #执行方法
        def execute(self, driver_command, params=None):
        """
        Sends a command to be executed by a command.CommandExecutor.

        :Args:
         - driver_command: The name of the command to execute as a string.
         - params: A dictionary of named parameters to send with the command.

        :Returns:
          The command‘s JSON response loaded into a dictionary object.
        """
        if self.session_id is not None:
            if not params:
                params = {‘sessionId‘: self.session_id}
            elif ‘sessionId‘ not in params:
                params[‘sessionId‘] = self.session_id

        params = self._wrap_value(params)
        #具体执行
        response = self.command_executor.execute(driver_command, params)
        if response:
            self.error_handler.check_response(response)
            response[‘value‘] = self._unwrap_value(
                response.get(‘value‘, None))
            return response
        # If the server doesn‘t send a response, assume the command was
        # a success
        return {‘success‘: 0, ‘value‘: None, ‘sessionId‘: self.session_id}
    
    #execute
      def execute(self, command, params):
        """
        Send a command to the remote server.

        Any path subtitutions required for the URL mapped to the command should be
        included in the command parameters.

        :Args:
         - command - A string specifying the command to execute.
         - params - A dictionary of named parameters to send with the command as
           its JSON payload.
        """
        command_info = self._commands[command]
        assert command_info is not None, ‘Unrecognised command %s‘ % command
        path = string.Template(command_info[1]).substitute(params)
        if hasattr(self, ‘w3c‘) and self.w3c and isinstance(params, dict) and ‘sessionId‘ in params:
            del params[‘sessionId‘]
        data = utils.dump_json(params)
        url = ‘%s%s‘ % (self._url, path)
        return self._request(command_info[0], url, body=data)

    
   # _request
           def _request(self, method, url, body=None):
        """
        Send an HTTP request to the remote server.

        :Args:
         - method - A string for the HTTP method to send the request with.
         - url - A string for the URL to send the request to.
         - body - A string for request body. Ignored unless method is POST or PUT.

        :Returns:
          A dictionary with the server‘s parsed JSON response.
        """
        LOGGER.debug(‘%s %s %s‘ % (method, url, body))

        parsed_url = parse.urlparse(url)
        headers = self.get_remote_connection_headers(parsed_url, self.keep_alive)
        resp = None
        if body and method != ‘POST‘ and method != ‘PUT‘:
            body = None

        if self.keep_alive:
            #self._conn就是remote_connection 对象
            resp = self._conn.request(method, url, body=body, headers=headers)

            statuscode = resp.status
        else:
            http = urllib3.PoolManager(timeout=self._timeout)
            resp = http.request(method, url, body=body, headers=headers)
            .....
    #remote_connection  
        

    def __init__(self, remote_server_addr, keep_alive=False, resolve_ip=True):
        # Attempt to resolve the hostname and get an IP address.
        self.keep_alive = keep_alive
        parsed_url = parse.urlparse(remote_server_addr)
        if parsed_url.hostname and resolve_ip:
            port = parsed_url.port or None
            if parsed_url.scheme == "https":
                ip = parsed_url.hostname
            elif port and not common_utils.is_connectable(port, parsed_url.hostname):
                ip = None
                LOGGER.info(‘Could not connect to port {} on host ‘
                            ‘{}‘.format(port, parsed_url.hostname))
            else:
                ip = common_utils.find_connectable_ip(parsed_url.hostname,
                                                      port=port)
            if ip:
                netloc = ip
                if parsed_url.port:
                    netloc = common_utils.join_host_port(netloc,
                                                         parsed_url.port)
                if parsed_url.username:
                    auth = parsed_url.username
                    if parsed_url.password:
                        auth += ‘:%s‘ % parsed_url.password
                    netloc = ‘%s@%s‘ % (auth, netloc)
                remote_server_addr = parse.urlunparse(
                    (parsed_url.scheme, netloc, parsed_url.path,
                     parsed_url.params, parsed_url.query, parsed_url.fragment))
            else:
                LOGGER.info(‘Could not get IP address for host: %s‘ %
                            parsed_url.hostname)
        
        #webdriver的地址
        self._url = remote_server_addr
        if keep_alive:
            self._conn = urllib3.PoolManager(timeout=self._timeout)
    
        #命令对应的请求
        self._commands = {
            Command.STATUS: (‘GET‘, ‘/status‘),
            Command.NEW_SESSION: (‘POST‘, ‘/session‘),
            Command.GET_ALL_SESSIONS: (‘GET‘, ‘/sessions‘),
            Command.QUIT: (‘DELETE‘, ‘/session/$sessionId‘),
            Command.GET_CURRENT_WINDOW_HANDLE:
                (‘GET‘, ‘/session/$sessionId/window_handle‘),
            Command.W3C_GET_CURRENT_WINDOW_HANDLE:
                (‘GET‘, ‘/session/$sessionId/window‘),
            Command.GET_WINDOW_HANDLES:
                (‘GET‘, ‘/session/$sessionId/window_handles‘),
            Command.W3C_GET_WINDOW_HANDLES:
                (‘GET‘, ‘/session/$sessionId/window/handles‘),
            Command.GET: (‘POST‘, ‘/session/$sessionId/url‘),
            Command.GO_FORWARD: (‘POST‘, ‘/session/$sessionId/forward‘),
            Command.GO_BACK: (‘POST‘, ‘/session/$sessionId/back‘),
            Command.REFRESH: (‘POST‘, ‘/session/$sessionId/refresh‘),
            Command.EXECUTE_SCRIPT: (‘POST‘, ‘/session/$sessionId/execute‘),
            Command.W3C_EXECUTE_SCRIPT:
                (‘POST‘, ‘/session/$sessionId/execute/sync‘),
            Command.W3C_EXECUTE_SCRIPT_ASYNC:
                (‘POST‘, ‘/session/$sessionId/execute/async‘),
            Command.GET_CURRENT_URL: (‘GET‘, ‘/session/$sessionId/url‘),
            Command.GET_TITLE: (‘GET‘, ‘/session/$sessionId/title‘),
            Command.GET_PAGE_SOURCE: (‘GET‘, ‘/session/$sessionId/source‘),
            Command.SCREENSHOT: (‘GET‘, ‘/session/$sessionId/screenshot‘),
            Command.ELEMENT_SCREENSHOT: (‘GET‘, ‘/session/$sessionId/element/$id/screenshot‘),
            Command.FIND_ELEMENT: (‘POST‘, ‘/session/$sessionId/element‘),
            Command.FIND_ELEMENTS: (‘POST‘, ‘/session/$sessionId/elements‘),
            Command.W3C_GET_ACTIVE_ELEMENT: (‘GET‘, ‘/session/$sessionId/element/active‘),
            Command.GET_ACTIVE_ELEMENT:
                (‘POST‘, ‘/session/$sessionId/element/active‘),
            Command.FIND_CHILD_ELEMENT:
                (‘POST‘, ‘/session/$sessionId/element/$id/element‘),
            Command.FIND_CHILD_ELEMENTS:
                (‘POST‘, ‘/session/$sessionId/element/$id/elements‘),
            Command.CLICK_ELEMENT: (‘POST‘, ‘/session/$sessionId/element/$id/click‘),
            Command.CLEAR_ELEMENT: (‘POST‘, ‘/session/$sessionId/element/$id/clear‘),
            Command.SUBMIT_ELEMENT: (‘POST‘, ‘/session/$sessionId/element/$id/submit‘),
            Command.GET_ELEMENT_TEXT: (‘GET‘, ‘/session/$sessionId/element/$id/text‘),
            Command.SEND_KEYS_TO_ELEMENT:
                (‘POST‘, ‘/session/$sessionId/element/$id/value‘),
            Command.SEND_KEYS_TO_ACTIVE_ELEMENT:
                (‘POST‘, ‘/session/$sessionId/keys‘),
            Command.UPLOAD_FILE: (‘POST‘, "/session/$sessionId/file"),
            Command.GET_ELEMENT_VALUE:
                (‘GET‘, ‘/session/$sessionId/element/$id/value‘),
            Command.GET_ELEMENT_TAG_NAME:
                (‘GET‘, ‘/session/$sessionId/element/$id/name‘),
            Command.IS_ELEMENT_SELECTED:
                (‘GET‘, ‘/session/$sessionId/element/$id/selected‘),
            Command.SET_ELEMENT_SELECTED:
                (‘POST‘, ‘/session/$sessionId/element/$id/selected‘),
            Command.IS_ELEMENT_ENABLED:
                (‘GET‘, ‘/session/$sessionId/element/$id/enabled‘),
            Command.IS_ELEMENT_DISPLAYED:
                (‘GET‘, ‘/session/$sessionId/element/$id/displayed‘),
            Command.GET_ELEMENT_LOCATION:
...

由以上代码可知,当操作元素时,其实是发操作对应的请求给webdriver服务端,然后服务端操作浏览器,并且返回响应给客户端。

selenium webdriver 执行原理

标签:must   hot   htm   could   from   stay   connect   use   LEDE   

原文地址:https://www.cnblogs.com/mlmy/p/13367516.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!