码迷,mamicode.com
首页 > 系统相关 > 详细

linux环境下,利用tc限制两台服务器间的网速,非常简单。

时间:2015-01-06 00:45:10      阅读:291      评论:0      收藏:0      [点我收藏+]

标签:

最近再搞postgres的数据同步,需要模拟异地机房有带宽限制时的同步效果,所以想要限制一下两台机器之间的网速。

ts命令功能很强,同时也好难理解和使用,经常浪费了好半天还是搞不定。

这里分享一个简单好用的脚本,只要设置一下目标ip和需要限制的速率,执行下就可以了:

#!/bin/bash
#
#  tc uses the following units when passed as a parameter.
#  kbps: Kilobytes per second 
#  mbps: Megabytes per second
#  kbit: Kilobits per second
#  mbit: Megabits per second
#  bps: Bytes per second 
#       Amounts of data can be specified in:
#       kb or k: Kilobytes
#       mb or m: Megabytes
#       mbit: Megabits
#       kbit: Kilobits
#  To get the byte figure from bits, divide the number by 8 bit
#
TC=/sbin/tc
IF=eth0            # Interface 
DNLD=1mbit          # DOWNLOAD Limit
UPLD=1mbit          # UPLOAD Limit 
IP=216.3.128.12     # Host IP
U32="$TC filter add dev $IF protocol ip parent 1:0 prio 1 u32"
 
start() {

    $TC qdisc add dev $IF root handle 1: htb default 30
    $TC class add dev $IF parent 1: classid 1:1 htb rate $DNLD
    $TC class add dev $IF parent 1: classid 1:2 htb rate $UPLD
    $U32 match ip dst $IP/32 flowid 1:1
    $U32 match ip src $IP/32 flowid 1:2

}

stop() {

    $TC qdisc del dev $IF root

}

restart() {

    stop
    sleep 1
    start

}

show() {

    $TC -s qdisc ls dev $IF

}

case "$1" in

  start)

    echo -n "Starting bandwidth shaping: "
    start
    echo "done"
    ;;

  stop)

    echo -n "Stopping bandwidth shaping: "
    stop
    echo "done"
    ;;

  restart)

    echo -n "Restarting bandwidth shaping: "
    restart
    echo "done"
    ;;

  show)
                    
    echo "Bandwidth shaping status for $IF:\n"
    show
    echo ""
    ;;

  *)

    pwd=$(pwd)
    echo "Usage: $(/usr/bin/dirname $pwd)/tc.bash {start|stop|restart|show}"
    ;;

esac

exit 0

 

原文地址:http://www.iplocation.net/tools/traffic-control.php

脚本地址:http://www.iplocation.net/tc.bash.txt

 

linux环境下,利用tc限制两台服务器间的网速,非常简单。

标签:

原文地址:http://www.cnblogs.com/baibaluo/p/4204925.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!