oracle 高级队列

标签：

转载：http://www.idevelopment.info/data/Oracle/DBA_tips/Advanced_Queuing/AQ_2.shtml

Overview

This article provides a brief overview on configuring and using Oracle‘s Advanced Queuing features using PL/SQL. This will demonstrate the basic functionality of Oracle Advanced Queuing (AQ). AQ was first introduced in Oracle8 and has been extended and improved on into future versions.

Setup and Configuration

Within this section of the article, I provide the steps required to configure our QA environment. This involves creating users and assigning them the privileges required to perform all necessary AQ operations.

Before creating the users, let‘s take a look at the two major roles that are provided for performing AQ administration and user operations:

   AQ_ADMINISTRATOR_ROLE

This role allows for the creation and administration of the queuing infrastructure.

   AQ_USER_ROLE

This role allows users to access queues for enqueue and dequeue operations.

Now, let‘s create the following two schemas; one owning the queuing infrastructure and another with access to it:

 

create_aq_users.sql

CONNECT sys/change_on_install as sysdba -- ------------------------------------------------------- DROP USER aq_admin_plsql CASCADE; CREATE USER aq_admin_plsql IDENTIFIED BY aq_admin_plsql DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp; ALTER USER aq_admin_plsql QUOTA UNLIMITED ON users; GRANT aq_administrator_role TO aq_admin_plsql; GRANT connect TO aq_admin_plsql; GRANT create type TO aq_admin_plsql; GRANT create sequence TO aq_admin_plsql; EXECUTE dbms_aqadm.grant_type_access(‘aq_admin_plsql‘); -- ------------------------------------------------------- DROP USER aq_user_plsql CASCADE; CREATE USER aq_user_plsql IDENTIFIED BY aq_user_plsql DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp; GRANT aq_user_role TO aq_user_plsql; GRANT connect TO aq_user_plsql;

Define Payload

The content, or payload, of a message is often defined using an OBJECT TYPE. We must define this before creating the queue. We also grant EXECUTE on the payload object type to our AQ user:

create_payload.sql

CONNECT aq_admin_plsql/aq_admin_plsql CREATE TYPE message_type AS OBJECT ( message_id NUMBER(15) , subject VARCHAR2(100) , text VARCHAR2(100) , dollar_value NUMBER(4,2) ) / GRANT EXECUTE ON message_type TO aq_user_plsql; CREATE SEQUENCE message_seq INCREMENT BY 1 START WITH 1000 NOMAXVALUE NOCYCLE; GRANT select ON message_seq TO aq_user_plsql;

Create Queue Table and Queue

Now that we have the payload created, it is time to create the queuing infrastructure. Queues are implemented using a queue table which can hold multiple queues with the same payload type.

First the queue table must be defined using the payload type, then the queue can be defined and started. All of these operations can be performed using the DBMS_AQADM package as follows:

create_queue_table_and_queue.sql

CONNECT aq_admin_plsql/aq_admin_plsql SET SERVEROUTPUT ON BEGIN -- ------------------------------------------------------- DBMS_AQADM.CREATE_QUEUE_TABLE ( queue_table => ‘aq_admin_plsql.msg_qt‘ , queue_payload_type => ‘aq_admin_plsql.message_type‘ ); -- ------------------------------------------------------- DBMS_AQADM.CREATE_QUEUE ( queue_name => ‘msg_queue‘ , queue_table => ‘aq_admin_plsql.msg_qt‘ , queue_type => DBMS_AQADM.NORMAL_QUEUE , max_retries => 0 , retry_delay => 0 , retention_time => 1209600 , dependency_tracking => FALSE , comment => ‘Test Object Type Queue‘ , auto_commit => FALSE ); -- ------------------------------------------------------- DBMS_AQADM.START_QUEUE(‘msg_queue‘); -- ------------------------------------------------------- DBMS_AQADM.GRANT_QUEUE_PRIVILEGE ( privilege => ‘ALL‘ , queue_name => ‘aq_admin_plsql.msg_queue‘ , grantee => ‘aq_user_plsql‘ , grant_option => FALSE ); -- ------------------------------------------------------- END; /

Enqueue Message

Use the DBMS_AQ.ENQUEUE procedure to write messages to the queue:

enqueue_message.sql

CONNECT aq_user_plsql/aq_user_plsql SET SERVEROUTPUT ON DECLARE enqueue_options dbms_aq.enqueue_options_t; message_properties dbms_aq.message_properties_t; message_handle RAW(16); message aq_admin_plsql.message_type; message_id NUMBER; BEGIN -- ------------------------------------------------------- SELECT aq_admin_plsql.message_seq.nextval INTO message_id FROM dual; -- ------------------------------------------------------- message := AQ_ADMIN_PLSQL.MESSAGE_TYPE ( message_id , ‘Subject: EXAMPLE MESSAGE‘ , ‘Message: THIS IS A SAMPLE MESSAGE.‘ , 10.2 ); -- ------------------------------------------------------- enqueue_options.VISIBILITY := DBMS_AQ.ON_COMMIT; enqueue_options.SEQUENCE_DEVIATION := null; -- ------------------------------------------------------- message_properties.PRIORITY := -5; message_properties.DELAY := DBMS_AQ.NO_DELAY; message_properties.EXPIRATION := DBMS_AQ.NEVER; message_properties.CORRELATION := ‘TEST MESSAGE‘; -- ------------------------------------------------------- DBMS_AQ.ENQUEUE ( queue_name => ‘aq_admin_plsql.msg_queue‘ , enqueue_options => enqueue_options , message_properties => message_properties , payload => message , msgid => message_handle ); -- ------------------------------------------------------- COMMIT; -- ------------------------------------------------------- END; /

Dequeue Message

Use the DBMS_AQ.DEQUEUE procedure to read messages from the queue:

dequeue_message.sql

CONNECT aq_user_plsql/aq_user_plsql SET SERVEROUTPUT ON DECLARE dequeue_options dbms_aq.dequeue_options_t; message_properties dbms_aq.message_properties_t; message_handle RAW(16); message aq_admin_plsql.message_type; BEGIN -- ------------------------------------------------------- dequeue_options.CONSUMER_NAME := NULL; dequeue_options.DEQUEUE_MODE := DBMS_AQ.REMOVE; dequeue_options.NAVIGATION := DBMS_AQ.NEXT_MESSAGE; dequeue_options.VISIBILITY := DBMS_AQ.IMMEDIATE; dequeue_options.WAIT := DBMS_AQ.FOREVER; dequeue_options.MSGID := null; dequeue_options.CORRELATION := ‘TEST MESSAGE‘; -- ------------------------------------------------------- DBMS_AQ.DEQUEUE ( queue_name => ‘aq_admin_plsql.msg_queue‘ , dequeue_options => dequeue_options , message_properties => message_properties , payload => message , msgid => message_handle ); -- ------------------------------------------------------- dbms_output.put_line(‘+-----------------+‘); dbms_output.put_line(‘| MESSAGE PAYLOAD |‘); dbms_output.put_line(‘+-----------------+‘); dbms_output.put_line(‘- Message ID := ‘ || message.message_id); dbms_output.put_line(‘- Subject := ‘ || message.subject); dbms_output.put_line(‘- Message := ‘ || message.text); dbms_output.put_line(‘- Dollar Value := ‘ || message.dollar_value); -- ------------------------------------------------------- COMMIT; -- ------------------------------------------------------- END; /

Script Output

Connected. +-----------------+ | MESSAGE PAYLOAD | +-----------------+ - Message ID := 1000 - Subject := Subject: EXAMPLE MESSAGE - Message := Message: THIS IS A SAMPLE MESSAGE. - Dollar Value := 10.2 PL/SQL procedure successfully completed.

Dropping All Objects

drop_aq_objects.sql

connect aq_admin_plsql/aq_admin_plsql EXECUTE dbms_aqadm.stop_queue(queue_name => ‘aq_admin_plsql.msg_queue‘); EXECUTE dbms_aqadm.drop_queue(queue_name => ‘aq_admin_plsql.msg_queue‘); EXECUTE dbms_aqadm.drop_queue_table(queue_table => ‘aq_admin_plsql.msg_qt‘); DROP TYPE aq_admin_plsql.message_type; DROP SEQUENCE aq_admin_plsql.message_seq; connect sys/change_on_install as sysdba DROP USER aq_user_plsql CASCADE; DROP USER aq_admin_plsql CASCADE;

oracle 高级队列

标签：

原文地址：http://www.cnblogs.com/jsingsunck/p/4665523.html