参考文章:
Improving Your Code with lint
lint
使用 lint 增强你的代码
Android Lint简介

gradle lint

gradle中有lint任务，可以直接执行lint静态代码检查，但是前提是你的build.gradle设置了lintOptions选项:

android {
    compileSdkVersion 23
    buildToolsVersion "21.1.2"
    lintOptions {
          abortOnError false
      }

然后我们在项目的根目录下执行gradle lint：

localhost:Sunshine-Version-2 wuxian$ gradle lint
:app:preBuild UP-TO-DATE
:app:preDebugBuild UP-TO-DATE
:app:checkDebugManifest
:app:preReleaseBuild UP-TO-DATE
:app:prepareComAndroidSupportAppcompatV72102Library UP-TO-DATE
:app:prepareComAndroidSupportSupportV42102Library UP-TO-DATE
:app:prepareDebugDependencies
:app:compileDebugAidl UP-TO-DATE
:app:compileDebugRenderscript UP-TO-DATE
:app:generateDebugBuildConfig UP-TO-DATE
:app:generateDebugAssets UP-TO-DATE
:app:mergeDebugAssets UP-TO-DATE
:app:generateDebugResValues UP-TO-DATE
:app:generateDebugResources UP-TO-DATE
:app:mergeDebugResources UP-TO-DATE
:app:processDebugManifest UP-TO-DATE
:app:processDebugResources UP-TO-DATE
:app:generateDebugSources UP-TO-DATE
:app:processDebugJavaRes UP-TO-DATE
:app:compileDebugJavaWithJavac UP-TO-DATE
:app:compileLint
:app:checkReleaseManifest
:app:prepareReleaseDependencies
:app:compileReleaseAidl UP-TO-DATE
:app:compileReleaseRenderscript UP-TO-DATE
:app:generateReleaseBuildConfig UP-TO-DATE
:app:generateReleaseAssets UP-TO-DATE
:app:mergeReleaseAssets UP-TO-DATE
:app:generateReleaseResValues UP-TO-DATE
:app:generateReleaseResources UP-TO-DATE
:app:mergeReleaseResources UP-TO-DATE
:app:processReleaseManifest UP-TO-DATE
:app:processReleaseResources UP-TO-DATE
:app:generateReleaseSources UP-TO-DATE
:app:processReleaseJavaRes UP-TO-DATE
:app:compileReleaseJavaWithJavac UP-TO-DATE
:app:lint
Ran lint on variant release: 58 issues found
Ran lint on variant debug: 58 issues found
Wrote HTML report to file:/Users/wuxian/Documents/sourcecode/self/Sunshine-Version-2/app/build/outputs/lint-results.html
Wrote XML report to /Users/wuxian/Documents/sourcecode/self/Sunshine-Version-2/app/build/outputs/lint-results.xml

BUILD SUCCESSFUL

Total time: 17.941 secs

This build could be faster, please consider using the Gradle Daemon: http://gradle.org/docs/2.4/userguide/gradle_daemon.html

在build/outputs/目录下会生成一个lint-result.html文件,打开一看如下：

报告做的太次了

总结

这种方式适合自动化CI系统中采集结果。

手动分析

选在分析代码后，弹出对话框，你可以选择分析整个项目/单个模块/文件bulabula:

点击OK后，等待一段时间后分析完毕，会自动弹出结果窗口

会根据检查类型不同分不同菜单，点击相应菜单进入不同的问题点:

点击问题点后右边会出现该问题的详细信息，文件名，文件位置，出现问题的点在文件中的位置以及问题描述，还会告诉你忽略这个问题的解决方法，有可能还会显示解决方法。

总结

这个方法适合开发自查！

lint命令行

lint工具位于sdk目录下的tools下，如果在命令行执行lint找不到该命令，那么需要将lint的根目录配置到环境变量中,配置成功后，执行lint命令输出如下:

58deMacBook-Pro-5:tools wuxian$ lint
Usage: lint [flags] <project directories>

Flags:

--help                   This message.
--help <topic>           Help on the given topic, such as "suppress".
--list                   List the available issue id‘s and exit.
--version                Output version information and exit.
--exitcode               Set the exit code to 1 if errors are found.
--show                   List available issues along with full explanations.
--show <ids>             Show full explanations for the given list of issue
                         id‘s.

Enabled Checks:
--disable <list>         Disable the list of categories or specific issue
                         id‘s. The list should be a comma-separated list of
                         issue id‘s or categories.
--enable <list>          Enable the specific list of issues. This checks all
                         the default issues plus the specifically enabled
                         issues. The list should be a comma-separated list of
                         issue id‘s or categories.
--check <list>           Only check the specific list of issues. This will
                         disable everything and re-enable the given list of
                         issues. The list should be a comma-separated list of
                         issue id‘s or categories.
-w, --nowarn             Only check for errors (ignore warnings)
-Wall                    Check all warnings, including those off by default
-Werror                  Treat all warnings as errors
--config <filename>      Use the given configuration file to determine whether
                         issues are enabled or disabled. If a project contains
                         a lint.xml file, then this config file will be used
                         as a fallback.

Output Options:
--quiet                  Don‘t show progress.
--fullpath               Use full paths in the error output.
--showall                Do not truncate long messages, lists of alternate
                         locations, etc.
--nolines                Do not include the source file lines with errors in
                         the output. By default, the error output includes
                         snippets of source code on the line containing the
                         error, but this flag turns it off.
--html <filename>        Create an HTML report instead. If the filename is a
                         directory (or a new filename without an extension),
                         lint will create a separate report for each scanned
                         project.
--url filepath=url       Add links to HTML report, replacing local path
                         prefixes with url prefix. The mapping can be a
                         comma-separated list of path prefixes to
                         corresponding URL prefixes, such as
                         C:\temp\Proj1=http://buildserver/sources/temp/Proj1. 
                         To turn off linking to files, use --url none
--simplehtml <filename>  Create a simple HTML report
--xml <filename>         Create an XML report instead.

Project Options:
--resources <dir>        Add the given folder (or path) as a resource
                         directory for the project. Only valid when running
                         lint on a single project.
--sources <dir>          Add the given folder (or path) as a source directory
                         for the project. Only valid when running lint on a
                         single project.
--classpath <dir>        Add the given folder (or jar file, or path) as a
                         class directory for the project. Only valid when
                         running lint on a single project.
--libraries <dir>        Add the given folder (or jar file, or path) as a
                         class library for the project. Only valid when
                         running lint on a single project.

Exit Status:
0                        Success.
1                        Lint errors detected.
2                        Lint usage.
3                        Cannot clobber existing file.
4                        Lint help.
5                        Invalid command-line argument.