MDT2013折腾记-UDP端口冲突

标签：windows   protocol   starting   network   address   

错误报告：

原因：我的DHCP服务器也使用了66、67端口，WDS也使用了相同端口。

解决办法

http://www.danielclasson.com/guide-solving-wds-issue-with-dhcp-port-conflict/

Have you ever installed WDS and DHCP on the same server? Usually this doesn’t cause a problem, but in some cases, you will have issues with starting the WDS server.

Looking at the event log you will see this nasty error: “The Windows Deployment Services Server service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted”

The solution to this problem is manually changing a registry value to force the WDS service to not use the DHCP ports.

Here’s how you do it:

Open Regedit and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WDSServer\WDSPXE

Open the reg value UseDhcpPorts and change it from 1 to 0

Now start the WDS Service and it should work 

本文出自 “秋冷了月光” 博客，谢绝转载！

MDT2013折腾记-UDP端口冲突

标签：windows   protocol   starting   network   address   

原文地址：http://tuzilaiye.blog.51cto.com/5705097/1747089