标签：
刘文学 原创作品转载请注明出处 http://blog.csdn.net/wdxz6547/article/details/50993837《Linux内核分析》MOOC课程http://mooc.study.163.com/course/USTC-1000029000
系统调用过程中一定发生中断, 在系统调用执行过程中可能有进程的切换.
load
execute
end, abort
create process (for example, fork on Unix-like systems, or NtCreateProcess in the Windows NT Native API)
terminate process
get/set process attributes
wait for time, wait event, signal event
allocate, free memory
create file, delete file
open, close
read, write, reposition
get/set file attributes
request device, release device
read, write, reposition
get/set device attributes
logically attach or detach devices
get/set time or date
get/set system data
get/set process, file, or device attributes
create, delete communication connection
send, receive messages
transfer status information
attach or detach remote devices
linux 系统64 位系统调用表
上面的系统调用并不需要完全掌握, 可以慢慢来, 当需要记住的 64 位系统有 326 个系统调用.
从内核初始化在 init/main.c 中的 start_kernel 函数. 其中一个初始化是 setup_arch,
对于 x86 来说, 实际调用的是 arch/x86/kernel/setup.c 中的 setup_arch 函数. 而
setup_arch 又调用了 early_trap_init 函数. 这部分与系统开启相关. 这里不详细讨论.
syscall 的初始化 syscall_init 在 arch/x86/kernel/cpu/common.c 的 cpu_init 函数中.
linux/arch/x86/kernel/cpu/common.c
void syscall_init(void)
{
/*
* LSTAR and STAR live in a bit strange symbiosis.
* They both write to the same internal register. STAR allows to
* set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
*/
wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
#ifdef CONFIG_IA32_EMULATION //允许 64 位系统运行 32 位程序
wrmsrl(MSR_CSTAR, (unsigned long)entry_SYSCALL_compat);
/*
* This only works on Intel CPUs.
* On AMD CPUs these MSRs are 32-bit, CPU truncates MSR_IA32_SYSENTER_EIP.
* This does not cause SYSENTER to jump to the wrong location, because
* AMD doesn‘t allow SYSENTER in long mode (either 32- or 64-bit).
*/
wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
#else //不允许 64 位系统运行 32 程序
wrmsrl(MSR_CSTAR, (unsigned long)ignore_sysret);
//[GDT](https://en.wikipedia.org/wiki/Global_Descriptor_Table)
wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
wrmsrl_safe(MSR_IA32_SYSENTER_EIP, 0ULL);
#endif
/* Flags to clear on syscall */
wrmsrl(MSR_SYSCALL_MASK,
X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|
X86_EFLAGS_IOPL|X86_EFLAGS_AC|X86_EFLAGS_NT);
}
linux/arch/x86/include/asm/segment.h
#define __KERNEL_CS (GDT_ENTRY_KERNEL_CS*8)
#define __USER32_CS (GDT_ENTRY_DEFAULT_USER32_CS*8 + 3)
linux/arch/x86/include/uapi/asm/processor-flags.h
#define X86_EFLAGS_TF _BITUL(X86_EFLAGS_TF_BIT)
#define X86_EFLAGS_DF _BITUL(X86_EFLAGS_DF_BIT)
#define X86_EFLAGS_IF _BITUL(X86_EFLAGS_IF_BIT)
#define X86_EFLAGS_AC _BITUL(X86_EFLAGS_AC_BIT)
#define X86_EFLAGS_IOPL (_AC(3,UL) << X86_EFLAGS_IOPL_BIT)
linux/arch/x86/kernel/cpu/msr.h
static inline void native_write_msr(unsigned int msr,
unsigned low, unsigned high)
{
//Write the value in EDX:EAX to MSR specified by ECX. MSR[ECX] = EDX:EAX;
asm volatile(""wrmsr"" : : ""c"" (msr), ""a""(low), ""d"" (high) : ""memory"");
if (msr_tracepoint_active(__tracepoint_read_msr))
do_trace_write_msr(msr, ((u64)high << 32 | low), 0);
}
/* Can be uninlined because referenced by paravirt */
notrace static inline int native_write_msr_safe(unsigned int msr,
unsigned low, unsigned high)
{
int err;
asm volatile(""2: wrmsr ; xor %[err],%[err]\n""
""1:\n\t""
"".section .fixup,\"ax\"\n\t""
""3: mov %[fault],%[err] ; jmp 1b\n\t""
"".previous\n\t""
_ASM_EXTABLE(2b, 3b)
: [err] ""=a"" (err)
: ""c"" (msr), ""0"" (low), ""d"" (high),
[fault] ""i"" (-EIO)
: ""memory"");
if (msr_tracepoint_active(__tracepoint_read_msr))
do_trace_write_msr(msr, ((u64)high << 32 | low), err);
return err;
}
static inline void wrmsr(unsigned msr, unsigned low, unsigned high)
{
native_write_msr(msr, low, high);
}
static inline void wrmsrl(unsigned msr, u64 val)
{
native_write_msr(msr, (u32)(val & 0xffffffffULL), (u32)(val >> 32));
}
/* wrmsr with exception handling */
static inline int wrmsr_safe(unsigned msr, unsigned low, unsigned high)
{
return native_write_msr_safe(msr, low, high);
}
#define wrmsrl_safe(msr, val) wrmsr_safe((msr), (u32)(val), (u32)((val) >> 32))
linux/arch/x86/entry/entry_64.S 1485 行
ENTRY(ignore_sysret)
mov $-ENOSYS, %eax
sysret
END(ignore_sysret)
wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
MSR_STAR contains 63:48 bits of the user code segment. These bits
will be loaded to the CS and SS segment registers for the sysret
instruction which provides functionality to return from a system
call to user code with the related privilege. Also the MSR_STAR
contains 47:32 bits from the kernel code that will be used as the
base selector for CS and SS segment registers when user space
applications execute a system call.
wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
加载 entry_SYSCALL_64 到 MSR_LSTAR 中, 其中 entry_SYSCALL_64 的定义
在[这里](http://code.woboq.org/linux/linux/arch/x86/entry/entry_64.S.html)
wrmsrl(MSR_CSTAR, (unsigned long)entry_SYSCALL_compat);
加载 entry_SYSCALL_compat 到 MSR_LSTAR 中, 其中 entry_SYSCALL_64 的定义
在[这里](http://code.woboq.org/linux/linux/arch/x86/entry/entry_64.S.html)
wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
保存 __KERNEL_CS 到 MSR_IA32_SYSENTER_CS
wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
MSR_IA32_SYSENTER_ESP 清零
wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
MSR_IA32_SYSENTER_EIP 指向 entry_SYSCALL_compat
wrmsrl(MSR_SYSCALL_MASK, X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF| X86_EFLAGS_IOPL|X86_EFLAGS_AC|X86_EFLAGS_NT);
标志位保存到 MSR_SYSCALL_MASK 之后, 被清零.
以上代码主要工作是将系统调用入口放入 MSR(model specific register)
在 Linux 内核处理系统调用中断之前, 在一个异常被处理之前, idtentry 宏执行准备工作;
在中断被处理之前, interrupt 宏执行准备工作; 在系统调用被处理之前, entry_SYSCALL_64
将做准备工作.
在控制器由用户态转到内核态后, 并不是立即就执行内核态系统调用表中的内核函数,
原因是在系统调用完成之后还要返回用户态, 因此在调用内核系统调用函数之前, 必须
做一些准备工作, 保持用户态的信息(堆栈, 寄存器)待系统调用完之后恢复现场.
初始化内核, 寄存器,堆栈 等等.
/*
* 64-bit SYSCALL instruction entry. Up to 6 arguments in registers.
*
* 64-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
* then loads new ss, cs, and rip from previously programmed MSRs.
* rflags gets masked by a value from another MSR (so CLD and CLAC
* are not needed). SYSCALL does not save anything on the stack
* and does not change rsp.
*
* Registers on entry:
* rax system call number
* rcx return address
* r11 saved rflags (note: r11 is callee-clobbered register in C ABI)
* rdi arg0
* rsi arg1
* rdx arg2
* r10 arg3 (needs to be moved to rcx to conform to C ABI)
* r8 arg4
* r9 arg5
* (note: r12-r15, rbp, rbx are callee-preserved in C ABI)
*
* Only called from user space.
*
* When user can change pt_regs->foo always force IRET. That is because
* it deals with uncanonical addresses better. SYSRET has trouble
* with them due to bugs in both AMD and Intel CPUs.
*/
ENTRY(entry_SYSCALL_64)
/*
* Interrupts are off on entry.
* We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
* it is too small to ever cause noticeable irq latency.
*/
SWAPGS_UNSAFE_STACK
/*
* A hypervisor implementation might want to use a label
* after the swapgs, so that it can do the swapgs
* for the guest and jump here on syscall.
*/
GLOBAL(entry_SYSCALL_64_after_swapgs)
//将旧的 rsp 保存到 rsp_scratch
movq %rsp, PER_CPU_VAR(rsp_scratch)
//rsp 指向 cpu_current_top_of_stack, 后续指令执行从 cpu_current_top_of_stack 地址开始
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
/* Construct struct pt_regs on stack */
//将 $__USER_DS 压栈
pushq $__USER_DS /* pt_regs->ss */
//将 rsp_scratch 压栈, 实际为旧的 rsp
pushq PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */
/*
* Re-enable interrupts.
* We use ‘rsp_scratch‘ as a scratch space, hence irq-off block above
* must execute atomically in the face of possible interrupt-driven
* task preemption. We must enable interrupts only after we‘re done
* with using rsp_scratch:
*/
//重新开启中断
ENABLE_INTERRUPTS(CLBR_NONE)
//保存通用寄存器, -ENOSYS, flags, 主要原因是系统调用会用到.
//rax - contains system call number;
//rcx - contains return address to the user space;
//r11 - contains register flags;
//rdi - contains first argument of a system call handler;
//rsi - contains second argument of a system call handler;
//rdx - contains third argument of a system call handler;
//r10 - contains fourth argument of a system call handler;
//r8 - contains fifth argument of a system call handler;
//r9 - contains sixth argument of a system call handler;
//其他寄存器 rbp, rbx, r12~r15 在 C-ABI 作为 callee-preserved
//其中 ENOSYS 是没有实现系统调用的错误代码
pushq %r11 /* pt_regs->flags */
pushq $__USER_CS /* pt_regs->cs */
pushq %rcx /* pt_regs->ip */
pushq %rax /* pt_regs->orig_ax */
pushq %rdi /* pt_regs->di */
pushq %rsi /* pt_regs->si */
pushq %rdx /* pt_regs->dx */
pushq %rcx /* pt_regs->cx */
pushq $-ENOSYS /* pt_regs->ax */
pushq %r8 /* pt_regs->r8 */
pushq %r9 /* pt_regs->r9 */
pushq %r10 /* pt_regs->r10 */
pushq %r11 /* pt_regs->r11 */
sub $(6*8), %rsp /* pt_regs->bp, bx, r12-15 not saved */
//测试是否进入系统跟踪
testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz tracesys
entry_SYSCALL_64_fastpath:
#if __SYSCALL_MASK == ~0
//__NR_syscall_max 为最大系统调用号
cmpq $__NR_syscall_max, %rax
#else
andl $__SYSCALL_MASK, %eax
cmpl $__NR_syscall_max, %eax
#endif
//CF, ZF 标志是否清零, 如果是跳到 1:
ja 1f /* return -ENOSYS (already in pt_regs->ax) */
//如果有正确的系统调用, 第四个参数赋值给给 rcx.
movq %r10, %rcx
//调用系统调用表中的函数, 系统调用表见前面分析.
call *sys_call_table(, %rax, 8)
//#define RAX 10*8
//将 rax(系统调用返回结果)保存到 rsp
movq %rax, RAX(%rsp)
1:
/*
* Syscall return path ending with SYSRET (fast path).
* Has incompletely filled pt_regs.
*/
//见后面附注
LOCKDEP_SYS_EXIT
/*
* We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
* it is too small to ever cause noticeable irq latency.
*/
DISABLE_INTERRUPTS(CLBR_NONE)
/*
* We must check ti flags with interrupts (or at least preemption)
* off because we must *never* return to userspace without
* processing exit work that is enqueued if we‘re preempted here.
* In particular, returning to userspace with any of the one-shot
* flags (TIF_NOTIFY_RESUME, TIF_USER_RETURN_NOTIFY, etc) set is
* very bad.
*/
testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
jnz int_ret_from_sys_call_irqs_off /* Go to the slow path */
//TODO
RESTORE_C_REGS_EXCEPT_RCX_R11
//不恢复 rcx, r11, rsp
movq RIP(%rsp), %rcx
movq EFLAGS(%rsp), %r11
movq RSP(%rsp), %rsp
/*
* 64-bit SYSRET restores rip from rcx,
* rflags from r11 (but RF and VM bits are forced to 0),
* cs and ss are loaded from MSRs.
* Restoration of rflags re-enables interrupts.
*
* NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
* descriptor is not reinitialized. This means that we should
* avoid SYSRET with SS == NULL, which could happen if we schedule,
* exit the kernel, and re-enter using an interrupt vector. (All
* interrupt entries on x86_64 set SS to NULL.) We prevent that
* from happening by reloading SS in __switch_to. (Actually
* detecting the failure in 64-bit userspace is tricky but can be
* done.)
*/
USERGS_SYSRET64
GLOBAL(int_ret_from_sys_call_irqs_off)
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
jmp int_ret_from_sys_call
/* Do syscall entry tracing */
tracesys:
movq %rsp, %rdi
movl $AUDIT_ARCH_X86_64, %esi
call syscall_trace_enter_phase1
test %rax, %rax
jnz tracesys_phase2 /* if needed, run the slow path */
RESTORE_C_REGS_EXCEPT_RAX /* else restore clobbered regs */
movq ORIG_RAX(%rsp), %rax
jmp entry_SYSCALL_64_fastpath /* and return to the fast path */
tracesys_phase2:
SAVE_EXTRA_REGS
movq %rsp, %rdi
movl $AUDIT_ARCH_X86_64, %esi
movq %rax, %rdx
call syscall_trace_enter_phase2
/*
* Reload registers from stack in case ptrace changed them.
* We don‘t reload %rax because syscall_trace_entry_phase2() returned
* the value it wants us to use in the table lookup.
*/
RESTORE_C_REGS_EXCEPT_RAX
RESTORE_EXTRA_REGS
#if __SYSCALL_MASK == ~0
cmpq $__NR_syscall_max, %rax
#else
andl $__SYSCALL_MASK, %eax
cmpl $__NR_syscall_max, %eax
#endif
ja 1f /* return -ENOSYS (already in pt_regs->ax) */
movq %r10, %rcx /* fixup for C */
call *sys_call_table(, %rax, 8)
movq %rax, RAX(%rsp)
1:
/* Use IRET because user could have changed pt_regs->foo */
/*
* Syscall return path ending with IRET.
* Has correct iret frame.
*/
GLOBAL(int_ret_from_sys_call)
SAVE_EXTRA_REGS
movq %rsp, %rdi
call syscall_return_slowpath /* returns with IRQs disabled */
RESTORE_EXTRA_REGS
TRACE_IRQS_IRETQ /* we‘re about to change IF */
/*
* Try to use SYSRET instead of IRET if we‘re returning to
* a completely clean 64-bit userspace context.
*/
movq RCX(%rsp), %rcx
movq RIP(%rsp), %r11
cmpq %rcx, %r11 /* RCX == RIP */
jne opportunistic_sysret_failed
/*
* On Intel CPUs, SYSRET with non-canonical RCX/RIP will #GP
* in kernel space. This essentially lets the user take over
* the kernel, since userspace controls RSP.
*
* If width of "canonical tail" ever becomes variable, this will need
* to be updated to remain correct on both old and new CPUs.
*/
.ifne __VIRTUAL_MASK_SHIFT - 47
.error ""virtual address width changed -- SYSRET checks need update""
.endif
/* Change top 16 bits to be the sign-extension of 47th bit */
shl $(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx
sar $(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx
/* If this changed %rcx, it was not canonical */
cmpq %rcx, %r11
jne opportunistic_sysret_failed
cmpq $__USER_CS, CS(%rsp) /* CS must match SYSRET */
jne opportunistic_sysret_failed
movq R11(%rsp), %r11
cmpq %r11, EFLAGS(%rsp) /* R11 == RFLAGS */
jne opportunistic_sysret_failed
/*
* SYSRET can‘t restore RF. SYSRET can restore TF, but unlike IRET,
* restoring TF results in a trap from userspace immediately after
* SYSRET. This would cause an infinite loop whenever #DB happens
* with register state that satisfies the opportunistic SYSRET
* conditions. For example, single-stepping this user code:
*
* movq $stuck_here, %rcx
* pushfq
* popq %r11
* stuck_here:
*
* would never get past ‘stuck_here‘.
*/
testq $(X86_EFLAGS_RF|X86_EFLAGS_TF), %r11
jnz opportunistic_sysret_failed
/* nothing to check for RSP */
cmpq $__USER_DS, SS(%rsp) /* SS must match SYSRET */
jne opportunistic_sysret_failed
/*
* We win! This label is here just for ease of understanding
* perf profiles. Nothing jumps here.
*/
syscall_return_via_sysret:
/* rcx and r11 are already restored (see code above) */
RESTORE_C_REGS_EXCEPT_RCX_R11
movq RSP(%rsp), %rsp
USERGS_SYSRET64
opportunistic_sysret_failed:
SWAPGS
jmp restore_c_regs_and_iret
END(entry_SYSCALL_64)
linux/arch/x86/include/asm/irqflags.h
/*
* Currently paravirt can‘t handle swapgs nicely when we
* don‘t have a stack we can rely on (such as a user space
* stack). So we either find a way around these or just fault
* and emulate if a guest tries to call swapgs directly.
*
* Either way, this is a good way to document that we don‘t
* have a reliable stack. x86_64 only.
*/
#define SWAPGS_UNSAFE_STACK swapgs
[swapgs](http://www.felixcloutier.com/x86/SWAPGS.html)
SWAPGS exchanges the current GS base register value with the
value contained in MSR address C0000102H (IA32_KERNEL_GS_BASE).
The SWAPGS instruction is a privileged instruction intended
for use by system soft-ware.
When using SYSCALL to implement system calls, there is no kernel
stack at the OS entry point. Neither is there a straightforward
method to obtain a pointer to kernel structures from which the
kernel stack pointer could be read. Thus, the kernel cannot
save general purpose registers or reference memory.
By design, SWAPGS does not require any general purpose registers
or memory operands. No registers need to be saved before using
the instruction. SWAPGS exchanges the CPL 0 data pointer from
the IA32_KERNEL_GS_BASE MSR with the GS base register. The kernel
can then use the GS prefix on normal memory references to access
kernel data structures. Similarly, when the OS kernel is entered
using an interrupt or exception (where the kernel stack is already
set up), SWAPGS can be used to quickly get a pointer to the kernel
data structures.
The IA32_KERNEL_GS_BASE MSR itself is only accessible using
RDMSR/WRMSR instructions. Those instructions are only accessible
at privilege level 0. The WRMSR instruction ensures that the
IA32_KERNEL_GS_BASE MSR contains a canonical address.
linux/arch/x86/include/asm/thread_info.h
/* work to do in syscall_trace_enter() */
#define _TIF_WORK_SYSCALL_ENTRY (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | _TIF_SINGLESTEP | _TIF_SYSCALL_TRACEPOINT | _TIF_NOHZ)
/*
* ASM operand which evaluates to a ‘thread_info‘ address of
* the current task, if it is known that "reg" is exactly "off"
* bytes below the top of the stack currently.
*
* ( The kernel stack‘s size is known at build time, it is usually
* 2 or 4 pages, and the bottom of the kernel stack contains
* the thread_info structure. So to access the thread_info very
* quickly from assembly code we can calculate down from the
* top of the kernel stack to the bottom, using constant,
* build-time calculations only. )
*
* For example, to fetch the current thread_info->flags value into %eax
* on x86-64 defconfig kernels, in syscall entry code where RSP is
* currently at exactly SIZEOF_PTREGS bytes away from the top of the
* stack:
*
* mov ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS), %eax
*
* will translate to:
*
* 8b 84 24 b8 c0 ff ff mov -0x3f48(%rsp), %eax
*
* which is below the current RSP by almost 16K.
*/
#define ASM_THREAD_INFO(field, reg, off) ((field)+(off)-THREAD_SIZE)(reg)
linux/arch/x86/include/asm/thread_info.h
#define TI_flags 8 /* offsetof(struct thread_info, flags) # */
linux/arch/x86/entry/calling.h
#define SIZEOF_PTREGS 21*8
linux/include/generated/asm-offsets.h
#define __NR_syscall_max 545 /* sizeof(syscalls_64) - 1 # */
linux/arch/x86/include/asm/unistd.h
# ifdef CONFIG_X86_X32_ABI
# define __SYSCALL_MASK (~(__X32_SYSCALL_BIT))
# else
# define __SYSCALL_MASK (~0)
# endif
#define __X32_SYSCALL_BIT 0x40000000
linux/arch/x86/include/asm/irqflags.h
#ifdef CONFIG_DEBUG_LOCK_ALLOC
# define LOCKDEP_SYS_EXIT call lockdep_sys_exit_thunk
#else
# define LOCKDEP_SYS_EXIT
#endif
#define USERGS_SYSRET64 swapgs; sysretq;以上包含了系统调用整个生命周期的管理. 包括系统调用前的运行环境保存,
执行系统调用, 系统调用之后的恢复等等.
当程序从用户态调用系统调用时, 这个指令导致一个异常, 由于异常都是在内核中处理的,
因此就会导致从用户态到内核态的转换, 系统调用权限也随之由用户态转换到内核态.
但转到内核态执行什么指令, 从哪开始呢? 从前面的分析可知, 实际的系统调用是
call *sys_call_table(, %rax, 8), 那么 sys_call_table 具体是什么, 保存在哪里,
有哪些内容? 这是本部分要解决的问题.
[linux/arch/x86/entry/syscall_64.c](http://code.woboq.org/linux/linux/arch/x86/entry/syscall_64.c.html)
#define __SYSCALL_COMMON(nr, sym, compat) __SYSCALL_64(nr, sym, compat)
#ifdef CONFIG_X86_X32_ABI
# define __SYSCALL_X32(nr, sym, compat) __SYSCALL_64(nr, sym, compat)
#else
# define __SYSCALL_X32(nr, sym, compat) /* nothing */
#endif
#define __SYSCALL_64(nr, sym, compat) extern asmlinkage long sym(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) ;
#include <asm/syscalls_64.h>
#undef __SYSCALL_64
#define __SYSCALL_64(nr, sym, compat) [nr] = sym,
asmlinkage const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = {
/*
* Smells like a compiler bug -- it doesn‘t work
* when the & below is removed.
*/
[0 ... __NR_syscall_max] = &sys_ni_syscall,
#include <asm/syscalls_64.h>
};
[linux/include/generated/asm-offsets.h]
#define __NR_syscall_max 545 /* sizeof(syscalls_64) - 1 # */
#define NR_syscalls 546 /* sizeof(syscalls_64) # */
linux/arch/x86/include/asm/syscall.h
typedef asmlinkage long (*sys_call_ptr_t)(unsigned long, unsigned long,
unsigned long, unsigned long,
unsigned long, unsigned long);
[linux/kernel/sys_ni.c](http://code.woboq.org/linux/linux/kernel/sys_ni.c.html#sys_ni_syscall)
/* we can‘t #include <linux/syscalls.h> here,
but tell gcc to not warn with -Wmissing-prototypes */
asmlinkage long sys_ni_syscall(void);
/*
* Non-implemented system calls get redirected here.
*/
asmlinkage long sys_ni_syscall(void)
{
return -ENOSYS;
}其中 [0 … __NR_syscall_max] = &sys_ni_syscall 是
gcc 扩展.
sys_ni_syscall 只是初始化 sys_call_table, 真正的初始化由
脚本
以文件
为输入, 输出头文件asm/syscalls_64.h
最后, sys_call_table 变成了这样:
asmlinkage const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = {
[0 ... __NR_syscall_max] = &sys_ni_syscall,
[0] = sys_read,
[1] = sys_write,
[2] = sys_open,
...
...
...
};系统调用从 syscall_init 开始, 之后定位系统调用到 entry_SYSCALL_64,
entry_SYSCALL_64 包括了保存现场, 执行系统调用, 恢复现场的工作.
而实际系统调用是通过定位 sys_call_table 中的元素完成的. 至此, 系统
调用整个流程已经走完, 那么就以一个具体的系统调用为例. 解释 wirte
系统调用做了哪些工作.
https://github.com/torvalds/linux/blob/master/fs/read_write.c
SYSCALL_DEFINE3(read, unsigned int, fd, char __user *, buf, size_t, count)
{
struct fd f = fdget_pos(fd);
ssize_t ret = -EBADF;
if (f.file) {
loff_t pos = file_pos_read(f.file);
ret = vfs_read(f.file, buf, count, &pos);
if (ret >= 0)
file_pos_write(f.file, pos);
fdput_pos(f);
}
return ret;
}
SYSCALL_DEFINE3(write, unsigned int, fd, const char __user *, buf,
size_t, count)
{
struct fd f = fdget_pos(fd);
ssize_t ret = -EBADF;
if (f.file) {
loff_t pos = file_pos_read(f.file);
ret = vfs_write(f.file, buf, count, &pos);
if (ret >= 0)
file_pos_write(f.file, pos);
fdput_pos(f);
}
return ret;
}
http://code.woboq.org/linux/linux/include/linux/syscalls.h.html
/*
* __MAP - apply a macro to syscall arguments
* __MAP(n, m, t1, a1, t2, a2, ..., tn, an) will expand to
* m(t1, a1), m(t2, a2), ..., m(tn, an)
* The first argument must be equal to the amount of type/name
* pairs given. Note that this list of pairs (i.e. the arguments
* of __MAP starting at the third one) is in the same format as
* for SYSCALL_DEFINE<n>/COMPAT_SYSCALL_DEFINE<n>
*/
#define __MAP0(m,...)
#define __MAP1(m,t,a) m(t,a)
#define __MAP2(m,t,a,...) m(t,a), __MAP1(m,__VA_ARGS__)
#define __MAP3(m,t,a,...) m(t,a), __MAP2(m,__VA_ARGS__)
#define __MAP4(m,t,a,...) m(t,a), __MAP3(m,__VA_ARGS__)
#define __MAP5(m,t,a,...) m(t,a), __MAP4(m,__VA_ARGS__)
#define __MAP6(m,t,a,...) m(t,a), __MAP5(m,__VA_ARGS__)
#define __MAP(n,...) __MAP##n(__VA_ARGS__)
#define __SC_DECL(t, a) t a
#define __TYPE_IS_L(t) (__same_type((t)0, 0L))
#define __TYPE_IS_UL(t) (__same_type((t)0, 0UL))
#define __TYPE_IS_LL(t) (__same_type((t)0, 0LL) || __same_type((t)0, 0ULL))
#define __SC_LONG(t, a) __typeof(__builtin_choose_expr(__TYPE_IS_LL(t), 0LL, 0L)) a
#define __SC_CAST(t, a) (t) a
#define __SC_ARGS(t, a) a
#define __SC_TEST(t, a) (void)BUILD_BUG_ON_ZERO(!__TYPE_IS_LL(t) && sizeof(t) > sizeof(long))
#define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__)
#define SYSCALL_DEFINE2(name, ...) SYSCALL_DEFINEx(2, _##name, __VA_ARGS__)
#define SYSCALL_DEFINE3(name, ...) SYSCALL_DEFINEx(3, _##name, __VA_ARGS__)
#define SYSCALL_DEFINE4(name, ...) SYSCALL_DEFINEx(4, _##name, __VA_ARGS__)
#define SYSCALL_DEFINE5(name, ...) SYSCALL_DEFINEx(5, _##name, __VA_ARGS__)
#define SYSCALL_DEFINE6(name, ...) SYSCALL_DEFINEx(6, _##name, __VA_ARGS__)
#define SYSCALL_DEFINEx(x, sname, ...) \
SYSCALL_METADATA(sname, x, __VA_ARGS__) __SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
#define __PROTECT(...) asmlinkage_protect(__VA_ARGS__)
#define __SYSCALL_DEFINEx(x, name, ...) \
asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \
__attribute__((alias(__stringify(SyS##name)))); \
static inline long SYSC##name(__MAP(x,__SC_DECL,__VA_ARGS__)); \
asmlinkage long SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__)); \
asmlinkage long SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \
{ long ret = SYSC##name(__MAP(x,__SC_CAST,__VA_ARGS__)); \
__MAP(x,__SC_TEST,__VA_ARGS__); __PROTECT(x, ret,__MAP(x,__SC_ARGS,__VA_ARGS__)); return ret; } static inline long SYSC##name(__MAP(x,__SC_DECL,__VA_ARGS__))
#ifdef CONFIG_FTRACE_SYSCALLS //跟踪系统调用
#define SYSCALL_METADATA(sname, nb, ...) \
static const char *types_##sname[] = { \
__MAP(nb,__SC_STR_TDECL,__VA_ARGS__) }; static const char *args_##sname[] = { \
__MAP(nb,__SC_STR_ADECL,__VA_ARGS__) }; SYSCALL_TRACE_ENTER_EVENT(sname); SYSCALL_TRACE_EXIT_EVENT(sname); static struct syscall_metadata __used __syscall_meta_##sname = { \
.name = "sys"#sname, \
.syscall_nr = -1, /* Filled in at boot */ .nb_args = nb, .types = nb ? types_##sname : NULL, \
.args = nb ? args_##sname : NULL, \
.enter_event = &event_enter_##sname, \
.exit_event = &event_exit_##sname, \
.enter_fields = LIST_HEAD_INIT(__syscall_meta_##sname.enter_fields), \
}; static struct syscall_metadata __used __attribute__((section("__syscalls_metadata"))) *__p_syscall_meta_##sname = &__syscall_meta_##sname;
#else
#define SYSCALL_METADATA(sname, nb, ...)
#endif
http://code.woboq.org/linux/linux/include/linux/compiler.h.html
# define __user __attribute__((noderef, address_space(1))) //主要供 sparse 工具使用由于 SYSCALL_DEFINEx 调用了 SYSCALL_METADATA 和 __SYSCALL_DEFINEx
由于 SYSCALL_METADATA 是跟踪系统调用的, 因此我们注意关注 __SYSCALL_DEFINEx
对于 __MAP 宏变化过程
其中 __MAP(3,__SC_DECL, unsigned int, fd, const char __user *, buf, size_t, count) 翻译为
unsigned int fd, const char __user * buf, size_t, count
其中 __MAP(3,__SC_LONG, unsigned int, fd, const char __user *, buf, size_t, count) 翻译为
__typeof(__builtin_choose_expr(__TYPE_IS_LL(unsigned int), 0LL, 0L)) fd __builtin_choose_expr(__TYPE_IS_LL(const char __user *), 0LL, 0L)) buf __builtin_choose_expr(__TYPE_IS_LL(size_t), 0LL, 0L)) count
因此, wirte 系统调用编译之后变为:
asmlinkage long sys_write(unsigned int fd, const char __user * buf, size_t, count)
__attribute__((alias(__stringify(SyS_write))));
static inline long SYSC_write(unsigned int fd, const char __user * buf, size_t, count);
//SyS_write 函数定义
asmlinkage long SyS_write(
__typeof(__builtin_choose_expr((__same_type((unsigned int)0, 0LL)
|| __same_type((unsigned int)0, 0ULL)),
0LL, 0L))
fd,
__typeof(__builtin_choose_expr((__same_type((const char __user *)0, 0LL)
|| __same_type((const char __user *)0, 0ULL)),
0LL, 0L))
buf,
__typeof(__builtin_choose_expr((__same_type((size_t)0, 0LL)
|| __same_type((size_t)0, 0ULL)),
0LL, 0L))
count
);
//SyS_write 函数定义
asmlinkage long SyS_write(
__typeof(__builtin_choose_expr((__same_type((unsigned int)0, 0LL)
|| __same_type((unsigned int)0, 0ULL)),
0LL, 0L))
fd,
__typeof(__builtin_choose_expr((__same_type((const char __user *)0, 0LL)
|| __same_type((const char __user *)0, 0ULL)),
0LL, 0L))
buf,
__typeof(__builtin_choose_expr((__same_type((size_t)0, 0LL)
|| __same_type((size_t)0, 0ULL)),
0LL, 0L))
count
)
{
long ret = SYSC_write(
(unsigned int) fd,
(const char __user *) buf,
(size_t) count
);
(void)BUILD_BUG_ON_ZERO(
!(__same_type((unsigned int)0, 0LL) || __same_type((unsigned int)0, 0ULL))
&& sizeof(unsigned int) > sizeof(long)),
(void)BUILD_BUG_ON_ZERO(
!__same_type((const char __user *)0, 0LL) || __same_type((const char __user *)0, 0ULL))
&& sizeof(const char __user *) > sizeof(long)),
(void)BUILD_BUG_ON_ZERO(
!__same_type((size_t)0, 0LL) || __same_type((size_t)0, 0ULL))
&& sizeof(size_t) > sizeof(long)),
asmlinkage_protect(3, ret, fd, buf, count)
return ret;
}
static inline long SYSC_write(unsigned int fd, const char __user * buf, size_t, count)
//之前是函数头的解析后的结果, 下面是函数体
{
/*
* struct files_struct files;
* v = (unsigned long) files ->fdt->fd[fd]
* struct fd f = (struct fd){(struct file *)v &~3, v&3 }
*
* struct fd {
* struct file *file;
* unsigned int flags;
* };
*/
struct fd f = fdget_pos(fd);
ssize_t ret = -EBADF;
if (f.file) {
//获取当前文件的位置 : pos = file->f_pos;
loff_t pos = file_pos_read(f.file);
//将 buf 内容 count 个 byte 从 pos 开始写入 f.file. 详细待后续文件系统部分分析.
ret = vfs_write(f.file, buf, count, &pos);
//如果写入文件字节数大于等于 0
if (ret >= 0)
//更改当前文件的 pos: file->f_pos = pos;
file_pos_write(f.file, pos);
//解锁, 实际调用 fput, 待后续文件系统部分分析.
fdput_pos(f);
}
return ret;
}至此, write 系统调用分析完成, 细节见注释.
当然你也可以根据自己的偏好分析其中一个系统调用的具体实现, 相信付出是高回报的.
注: 当一个函数多余 6 个参数, 其余参数将被放在栈
#include <stdio.h>
#include <string.h>
#include <fcntl.h>
int main(int argc, char **argv)
{
const char *str = "hello systemcall";
size_t len = strlen(str) + 1;
ssize_t ret = 1;
int fd = open("tmp1", O_WRONLY | O_CREAT | O_APPEND);
printf("write %d return %lu\n", fd, ret);
//write(fd, str, len);
asm volatile (
"mov %1,%%edi\n\t" //fd 传递给第一个参数
"movq %2,%%rsi\n\t" //str 地址传递给第二个参数
"movq %3,%%rdx\n\t" //len 传递给第三个参数
"movq $1,%%rax\n\t" //系统调用号 1
"syscall\n\t"
"movq %%rax, %0\n\t" //将write 返回结果给 ret
:"=p"(ret)
:"b"(fd), "p"(str), "d"(len)
);
printf("write return %lu\n", ret);
return 0;
}$ gcc -o test test.c
$ ./test
write 3 return 4195536
write return 17
$ ltrace ./test
__libc_start_main(0x4005bd, 1, 0x7fff40ba1148, 0x400650 <unfinished ...>
strlen("hello systemcall") = 16
open("tmp", 1024, 04200000) = 3
+++ exited (status 0) +++
$ ltrace ./test
...
__libc_start_main(0x4005bd, 1, 0x7fff15fa4358, 0x400650 <unfinished ...>
strlen("hello systemcall") = 16
open("tmp", 1024, 04200000 <unfinished ...>
SYS_open("tmp", 1024, 04200000) = 3
<... open resumed> ) = 3
SYS_write(3, "hello systemcall", 17 <no return ...>
+++ exited (status 0) +++
$ strace ./test
open("tmp1", O_WRONLY|O_CREAT|O_APPEND, 0200000020400000) = 3
fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 10), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f34c0174000
write(1, "write 3 return 4195536\n", 23write 3 return 4195536
) = 23
write(3, "hello systemcall\n", 17) = 17
write(1, "write return 17\n", 16write return 17
) = 16
exit_group(0) = ?
+++ exited with 0 +++
strace 是查看系统调用的利器, 既可以查看正在调用的进程的系统调用, 也可以看正在运行的程序
正在执行的系统调用.
更多参考 man strace man lstrace
系统调用在系统中无处不在, 我们知道在 /proc 文件系统保持了进程信息.
比如 /proc/1 代表进程号 1 的进程信息.
$ cat /proc/1/comm
init
$ sudo cat /proc/1/syscall
23 0x1d 0x7fff4930fa40 0x7fff4930fac0 0x7fff4930fb40 0x0 0x7fbeb3e03420 0x7fff4930f7e8 0x7fbeb2093d83
其中 23 就是系统调用号. 想知道其他进程正在执行的系统调用, 是不是很容易了:)
TODO
操作系统为用户态进程与硬件设备进行交互提供了一组接口——系统调用
应用编程接口 (application program interface, API) 和系统调用是不同的
Libc库定义的一些API引用了封装例程(wrapper routine,唯一目的就是发布系统调用)
不是每个API都对应一个特定的系统调用
返回值
此外, 系统调用必须尽量快, 因此必须尽量小, 而标准库负责参数校验等工作.
当用户态进程调用一个系统调用时,CPU切换到内核态并开始执行一个内核函数。
在Linux中是通过执行int $0x80来执行系统调用的, 这条汇编指令产生向量为
128的编程异常
整个系统调用过程如下:
https://0xax.gitbooks.io/linux-insides/content/SysCall/syscall-1.html
https://en.wikipedia.org/wiki/System_call
Intel 指令参考
GDT
0 common read sys_read
1 common write sys_write
2 common open sys_open
3 common close sys_close
4 common stat sys_newstat
5 common fstat sys_newfstat
6 common lstat sys_newlstat
7 common poll sys_poll
8 common lseek sys_lseek
9 common mmap sys_mmap
10 common mprotect sys_mprotect
11 common munmap sys_munmap
12 common brk sys_brk
13 64 rt_sigaction sys_rt_sigaction
14 common rt_sigprocmask sys_rt_sigprocmask
15 64 rt_sigreturn sys_rt_sigreturn/ptregs
16 64 ioctl sys_ioctl
17 common pread64 sys_pread64
18 common pwrite64 sys_pwrite64
19 64 readv sys_readv
20 64 writev sys_writev
21 common access sys_access
22 common pipe sys_pipe
23 common select sys_select
24 common sched_yield sys_sched_yield
25 common mremap sys_mremap
26 common msync sys_msync
27 common mincore sys_mincore
28 common madvise sys_madvise
29 common shmget sys_shmget
30 common shmat sys_shmat
31 common shmctl sys_shmctl
32 common dup sys_dup
33 common dup2 sys_dup2
34 common pause sys_pause
35 common nanosleep sys_nanosleep
36 common getitimer sys_getitimer
37 common alarm sys_alarm
38 common setitimer sys_setitimer
39 common getpid sys_getpid
40 common sendfile sys_sendfile64
41 common socket sys_socket
42 common connect sys_connect
43 common accept sys_accept
44 common sendto sys_sendto
45 64 recvfrom sys_recvfrom
46 64 sendmsg sys_sendmsg
47 64 recvmsg sys_recvmsg
48 common shutdown sys_shutdown
49 common bind sys_bind
50 common listen sys_listen
51 common getsockname sys_getsockname
52 common getpeername sys_getpeername
53 common socketpair sys_socketpair
54 64 setsockopt sys_setsockopt
55 64 getsockopt sys_getsockopt
56 common clone sys_clone/ptregs
57 common fork sys_fork/ptregs
58 common vfork sys_vfork/ptregs
59 64 execve sys_execve/ptregs
60 common exit sys_exit
61 common wait4 sys_wait4
62 common kill sys_kill
63 common uname sys_newuname
64 common semget sys_semget
65 common semop sys_semop
66 common semctl sys_semctl
67 common shmdt sys_shmdt
68 common msgget sys_msgget
69 common msgsnd sys_msgsnd
70 common msgrcv sys_msgrcv
71 common msgctl sys_msgctl
72 common fcntl sys_fcntl
73 common flock sys_flock
74 common fsync sys_fsync
75 common fdatasync sys_fdatasync
76 common truncate sys_truncate
77 common ftruncate sys_ftruncate
78 common getdents sys_getdents
79 common getcwd sys_getcwd
80 common chdir sys_chdir
81 common fchdir sys_fchdir
82 common rename sys_rename
83 common mkdir sys_mkdir
84 common rmdir sys_rmdir
85 common creat sys_creat
86 common link sys_link
87 common unlink sys_unlink
88 common symlink sys_symlink
89 common readlink sys_readlink
90 common chmod sys_chmod
91 common fchmod sys_fchmod
92 common chown sys_chown
93 common fchown sys_fchown
94 common lchown sys_lchown
95 common umask sys_umask
96 common gettimeofday sys_gettimeofday
97 common getrlimit sys_getrlimit
98 common getrusage sys_getrusage
99 common sysinfo sys_sysinfo
100 common times sys_times
101 64 ptrace sys_ptrace
102 common getuid sys_getuid
103 common syslog sys_syslog
104 common getgid sys_getgid
105 common setuid sys_setuid
106 common setgid sys_setgid
107 common geteuid sys_geteuid
108 common getegid sys_getegid
109 common setpgid sys_setpgid
110 common getppid sys_getppid
111 common getpgrp sys_getpgrp
112 common setsid sys_setsid
113 common setreuid sys_setreuid
114 common setregid sys_setregid
115 common getgroups sys_getgroups
116 common setgroups sys_setgroups
117 common setresuid sys_setresuid
118 common getresuid sys_getresuid
119 common setresgid sys_setresgid
120 common getresgid sys_getresgid
121 common getpgid sys_getpgid
122 common setfsuid sys_setfsuid
123 common setfsgid sys_setfsgid
124 common getsid sys_getsid
125 common capget sys_capget
126 common capset sys_capset
127 64 rt_sigpending sys_rt_sigpending
128 64 rt_sigtimedwait sys_rt_sigtimedwait
129 64 rt_sigqueueinfo sys_rt_sigqueueinfo
130 common rt_sigsuspend sys_rt_sigsuspend
131 64 sigaltstack sys_sigaltstack
132 common utime sys_utime
133 common mknod sys_mknod
134 64 uselib
135 common personality sys_personality
136 common ustat sys_ustat
137 common statfs sys_statfs
138 common fstatfs sys_fstatfs
139 common sysfs sys_sysfs
140 common getpriority sys_getpriority
141 common setpriority sys_setpriority
142 common sched_setparam sys_sched_setparam
143 common sched_getparam sys_sched_getparam
144 common sched_setscheduler sys_sched_setscheduler
145 common sched_getscheduler sys_sched_getscheduler
146 common sched_get_priority_max sys_sched_get_priority_max
147 common sched_get_priority_min sys_sched_get_priority_min
148 common sched_rr_get_interval sys_sched_rr_get_interval
149 common mlock sys_mlock
150 common munlock sys_munlock
151 common mlockall sys_mlockall
152 common munlockall sys_munlockall
153 common vhangup sys_vhangup
154 common modify_ldt sys_modify_ldt
155 common pivot_root sys_pivot_root
156 64 _sysctl sys_sysctl
157 common prctl sys_prctl
158 common arch_prctl sys_arch_prctl
159 common adjtimex sys_adjtimex
160 common setrlimit sys_setrlimit
161 common chroot sys_chroot
162 common sync sys_sync
163 common acct sys_acct
164 common settimeofday sys_settimeofday
165 common mount sys_mount
166 common umount2 sys_umount
167 common swapon sys_swapon
168 common swapoff sys_swapoff
169 common reboot sys_reboot
170 common sethostname sys_sethostname
171 common setdomainname sys_setdomainname
172 common iopl sys_iopl/ptregs
173 common ioperm sys_ioperm
174 64 create_module
175 common init_module sys_init_module
176 common delete_module sys_delete_module
177 64 get_kernel_syms
178 64 query_module
179 common quotactl sys_quotactl
180 64 nfsservctl
181 common getpmsg
182 common putpmsg
183 common afs_syscall
184 common tuxcall
185 common security
186 common gettid sys_gettid
187 common readahead sys_readahead
188 common setxattr sys_setxattr
189 common lsetxattr sys_lsetxattr
190 common fsetxattr sys_fsetxattr
191 common getxattr sys_getxattr
192 common lgetxattr sys_lgetxattr
193 common fgetxattr sys_fgetxattr
194 common listxattr sys_listxattr
195 common llistxattr sys_llistxattr
196 common flistxattr sys_flistxattr
197 common removexattr sys_removexattr
198 common lremovexattr sys_lremovexattr
199 common fremovexattr sys_fremovexattr
200 common tkill sys_tkill
201 common time sys_time
202 common futex sys_futex
203 common sched_setaffinity sys_sched_setaffinity
204 common sched_getaffinity sys_sched_getaffinity
205 64 set_thread_area
206 64 io_setup sys_io_setup
207 common io_destroy sys_io_destroy
208 common io_getevents sys_io_getevents
209 64 io_submit sys_io_submit
210 common io_cancel sys_io_cancel
211 64 get_thread_area
212 common lookup_dcookie sys_lookup_dcookie
213 common epoll_create sys_epoll_create
214 64 epoll_ctl_old
215 64 epoll_wait_old
216 common remap_file_pages sys_remap_file_pages
217 common getdents64 sys_getdents64
218 common set_tid_address sys_set_tid_address
219 common restart_syscall sys_restart_syscall
220 common semtimedop sys_semtimedop
221 common fadvise64 sys_fadvise64
222 64 timer_create sys_timer_create
223 common timer_settime sys_timer_settime
224 common timer_gettime sys_timer_gettime
225 common timer_getoverrun sys_timer_getoverrun
226 common timer_delete sys_timer_delete
227 common clock_settime sys_clock_settime
228 common clock_gettime sys_clock_gettime
229 common clock_getres sys_clock_getres
230 common clock_nanosleep sys_clock_nanosleep
231 common exit_group sys_exit_group
232 common epoll_wait sys_epoll_wait
233 common epoll_ctl sys_epoll_ctl
234 common tgkill sys_tgkill
235 common utimes sys_utimes
236 64 vserver
237 common mbind sys_mbind
238 common set_mempolicy sys_set_mempolicy
239 common get_mempolicy sys_get_mempolicy
240 common mq_open sys_mq_open
241 common mq_unlink sys_mq_unlink
242 common mq_timedsend sys_mq_timedsend
243 common mq_timedreceive sys_mq_timedreceive
244 64 mq_notify sys_mq_notify
245 common mq_getsetattr sys_mq_getsetattr
246 64 kexec_load sys_kexec_load
247 64 waitid sys_waitid
248 common add_key sys_add_key
249 common request_key sys_request_key
250 common keyctl sys_keyctl
251 common ioprio_set sys_ioprio_set
252 common ioprio_get sys_ioprio_get
253 common inotify_init sys_inotify_init
254 common inotify_add_watch sys_inotify_add_watch
255 common inotify_rm_watch sys_inotify_rm_watch
256 common migrate_pages sys_migrate_pages
257 common openat sys_openat
258 common mkdirat sys_mkdirat
259 common mknodat sys_mknodat
260 common fchownat sys_fchownat
261 common futimesat sys_futimesat
262 common newfstatat sys_newfstatat
263 common unlinkat sys_unlinkat
264 common renameat sys_renameat
265 common linkat sys_linkat
266 common symlinkat sys_symlinkat
267 common readlinkat sys_readlinkat
268 common fchmodat sys_fchmodat
269 common faccessat sys_faccessat
270 common pselect6 sys_pselect6
271 common ppoll sys_ppoll
272 common unshare sys_unshare
273 64 set_robust_list sys_set_robust_list
274 64 get_robust_list sys_get_robust_list
275 common splice sys_splice
276 common tee sys_tee
277 common sync_file_range sys_sync_file_range
278 64 vmsplice sys_vmsplice
279 64 move_pages sys_move_pages
280 common utimensat sys_utimensat
281 common epoll_pwait sys_epoll_pwait
282 common signalfd sys_signalfd
283 common timerfd_create sys_timerfd_create
284 common eventfd sys_eventfd
285 common fallocate sys_fallocate
286 common timerfd_settime sys_timerfd_settime
287 common timerfd_gettime sys_timerfd_gettime
288 common accept4 sys_accept4
289 common signalfd4 sys_signalfd4
290 common eventfd2 sys_eventfd2
291 common epoll_create1 sys_epoll_create1
292 common dup3 sys_dup3
293 common pipe2 sys_pipe2
294 common inotify_init1 sys_inotify_init1
295 64 preadv sys_preadv
296 64 pwritev sys_pwritev
297 64 rt_tgsigqueueinfo sys_rt_tgsigqueueinfo
298 common perf_event_open sys_perf_event_open
299 64 recvmmsg sys_recvmmsg
300 common fanotify_init sys_fanotify_init
301 common fanotify_mark sys_fanotify_mark
302 common prlimit64 sys_prlimit64
303 common name_to_handle_at sys_name_to_handle_at
304 common open_by_handle_at sys_open_by_handle_at
305 common clock_adjtime sys_clock_adjtime
306 common syncfs sys_syncfs
307 64 sendmmsg sys_sendmmsg
308 common setns sys_setns
309 common getcpu sys_getcpu
310 64 process_vm_readv sys_process_vm_readv
311 64 process_vm_writev sys_process_vm_writev
312 common kcmp sys_kcmp
313 common finit_module sys_finit_module
314 common sched_setattr sys_sched_setattr
315 common sched_getattr sys_sched_getattr
316 common renameat2 sys_renameat2
317 common seccomp sys_seccomp
318 common getrandom sys_getrandom
319 common memfd_create sys_memfd_create
320 common kexec_file_load sys_kexec_file_load
321 common bpf sys_bpf
322 64 execveat sys_execveat/ptregs
323 common userfaultfd sys_userfaultfd
324 common membarrier sys_membarrier
325 common mlock2 sys_mlock2
326 common copy_file_range sys_copy_file_range
#
# x32-specific system call numbers start at 512 to avoid cache impact
# for native 64-bit operation.
#
512 x32 rt_sigaction compat_sys_rt_sigaction
513 x32 rt_sigreturn sys32_x32_rt_sigreturn
514 x32 ioctl compat_sys_ioctl
515 x32 readv compat_sys_readv
516 x32 writev compat_sys_writev
517 x32 recvfrom compat_sys_recvfrom
518 x32 sendmsg compat_sys_sendmsg
519 x32 recvmsg compat_sys_recvmsg
520 x32 execve compat_sys_execve/ptregs
521 x32 ptrace compat_sys_ptrace
522 x32 rt_sigpending compat_sys_rt_sigpending
523 x32 rt_sigtimedwait compat_sys_rt_sigtimedwait
524 x32 rt_sigqueueinfo compat_sys_rt_sigqueueinfo
525 x32 sigaltstack compat_sys_sigaltstack
526 x32 timer_create compat_sys_timer_create
527 x32 mq_notify compat_sys_mq_notify
528 x32 kexec_load compat_sys_kexec_load
529 x32 waitid compat_sys_waitid
530 x32 set_robust_list compat_sys_set_robust_list
531 x32 get_robust_list compat_sys_get_robust_list
532 x32 vmsplice compat_sys_vmsplice
533 x32 move_pages compat_sys_move_pages
534 x32 preadv compat_sys_preadv64
535 x32 pwritev compat_sys_pwritev64
536 x32 rt_tgsigqueueinfo compat_sys_rt_tgsigqueueinfo
537 x32 recvmmsg compat_sys_recvmmsg
538 x32 sendmmsg compat_sys_sendmmsg
539 x32 process_vm_readv compat_sys_process_vm_readv
540 x32 process_vm_writev compat_sys_process_vm_writev
541 x32 setsockopt compat_sys_setsockopt
542 x32 getsockopt compat_sys_getsockopt
543 x32 io_setup compat_sys_io_setup
544 x32 io_submit compat_sys_io_submit
545 x32 execveat compat_sys_execveat/ptregs
r
标签：
原文地址：http://blog.csdn.net/wdxz6547/article/details/50993837
