码迷,mamicode.com
首页 > 其他好文 > 详细

读取视屏文件,保存帧图片为ppm文件

时间:2016-06-06 16:34:26      阅读:225      评论:0      收藏:0      [点我收藏+]

标签:

ffmpeg跟sdl的学习过程:
一、版本信息:
ffmpeg-3.0.2.tar.bz2
SDL2-2.0.4.tar.gz
二、编译过程:
1、ffmgeg的编译:
./configure --enable-shared --disable-yasm --prefix=/usr/local/ffmpeg
make
make install

2、sdl的编译:
./configure --prefix=/usr/local/sdl
make
make install

3、系统环境配置:
查看/etc/ld.so.conf,知道 ”系统共享库路径”


方法一:把编译好的sdl的动态库,ffmpeg的动态库,复制到 “系统共享库路径“ 中,复制完成后,创建好软连接。
(完成之后调用指令ldconfig ???)


方法二:修改/etc/ld.so.conf
把下面的两行追加到ld.so.conf文件中
/usr/local/ffmpeg/lib
/usr/local/sdl/lib
调用ldconfig指令。
ldconfig做的这些东西都与运行程序时有关,跟编译连接sdl库,编译连接ffmpeg库一点关系都没有。编译的时候还是该加-L就得加,不要混淆了

方法三:临时环境变量
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/ffmpeg/lib:/usr/local/sdl/lib


方法四:修改shell文件:
$ vi ~/.bash_profile
没有LD_LIBRARY_PATH的话,添加:
LD_LIBRARY_PATH=/usr/local/ffmpeg/lib:/usr/local/sdl/lib
export LD_LIBRARY_PATH

有LD_LIBRARY_PATH的话,
在LD_LIBRARY_PATH之后进行路径添加即可。
LD_LIBRARY_PATH=.......:/usr/local/ffmpeg/lib:/usr/local/sdl/lib

修改完shell文件之后,然后运行
$ source ~/.bash_profile 就行了。
------------------------------------------------------------------
在shell下尝试设置LD_LIBRARY_PATH,以下面这种形式设置,老是报错bash: LD_LIBRARY_PATH: command not found,
LD_LIBRARY_PATH=/usr/local/lib
LD_LIBRARY_PATH = $ LD_LIBRARY_PATH:/usr/local/lib
可能是因为系统之前没有设置过LD_LIBRARY_PATH,于是改成这样:
export LD_LIBRARY_PATH=/usr/local/lib
然后用 echo $LD_LIBRARY_PATH检查一下是否真的设置成功
------------------------------------------------------------
三、编写代码,调用ffmpeg动态库。
代码,读取视屏文件,保存帧图片为ppm文件

#include <libavcodec/avcodec.h>
#include <libavformat/avformat.h>
#include <libswscale/swscale.h>
#include <stdio.h>

void SaveFrame(AVFrame *pFrame, int width, int height, int iFrame)
{
  FILE *pFile;
  char szFilename[32];
  int y;

  // Open file
  sprintf(szFilename, "frame%d.ppm", iFrame);
  pFile=fopen(szFilename, "wb");
  if(pFile==NULL)
  return;

  // Write header
  fprintf(pFile, "P6\n%d %d\n255\n", width, height);

  // Write pixel data
  for(y=0; y<height; y++)
  fwrite(pFrame->data[0]+y*pFrame->linesize[0], 1, width*3, pFile);

  // Close file
  fclose(pFile);
}

 


int main(int argc, char* argv[])
{
  AVFormatContext *pFormatCtx;
  int i, videoindex;
  AVCodecContext *pCodecCtx;
  AVCodec *pCodec;
  av_register_all();
  avformat_network_init();
  pFormatCtx = avformat_alloc_context();
  if(avformat_open_input(&pFormatCtx,argv[1],NULL,NULL)!=0)
  {
    printf("open file error\n");
    return -1;
  }

  if ( avformat_find_stream_info(pFormatCtx,NULL) < 0 )
  {
    return -1;
  }

  i = 0;
  int videostream = -1;
  printf("pFormatCtx->nb_streams=%d\n", pFormatCtx->nb_streams);
  for(i=0;i<pFormatCtx->nb_streams;i++)
  {
    if (pFormatCtx->streams[i]->codec->codec_type == AVMEDIA_TYPE_VIDEO)
    {
      videostream = i;
      break;
    }
  }
  printf("videostream=%d\n", videostream);

  if (-1 == videostream)
  {
    printf("error no video stream\n");
    return;
  }

  pCodecCtx = pFormatCtx->streams[videostream]->codec;


  pCodec = avcodec_find_decoder( pCodecCtx->codec_id );

  if(NULL == pCodec)
  {
    printf("couldn‘t find the decode\n");
    return -1;
  }

  if( avcodec_open2(pCodecCtx, pCodec, NULL) < 0)
  {
    printf("open decode error\n");
    return -1;
  }

  AVFrame *pFrame,*pFrameRGB;
  pFrame = av_frame_alloc();
  pFrameRGB = av_frame_alloc();
  uint8_t *out_buffer;

  int num = avpicture_get_size(AV_PIX_FMT_RGB24, pCodecCtx->width, pCodecCtx->height);
  printf("num=%d\n", num);


  out_buffer = (uint8_t *)av_malloc(num*sizeof(uint8_t));
  avpicture_fill((AVPicture *)pFrameRGB, out_buffer, AV_PIX_FMT_RGB24, pCodecCtx->width, pCodecCtx->height);


  AVPacket packet;
  int ret = -1;
  i = 0;
  struct SwsContext *img_convert_ctx = NULL;
  img_convert_ctx = sws_getContext(pCodecCtx->width,pCodecCtx->height,pCodecCtx->pix_fmt , pCodecCtx->width, pCodecCtx->height, AV_PIX_FMT_RGB24, SWS_BICUBIC, NULL, NULL, NULL);
  while(av_read_frame(pFormatCtx, &packet)>=0)
  {
    //printf("i=%d, videoindex=%d, packet.stream_index=%d\n", i++, videoindex, packet.stream_index);

    if(packet.stream_index == videostream)
    {
      //printf("111111\n");
      int got_picture = -1;
      ret = avcodec_decode_video2(pCodecCtx, pFrame, &got_picture, &packet);

      if(ret < 0)
      {
        printf("decode error\n");
        return -1;
      }

      //printf("got_picture:%d\n",got_picture);
      if(got_picture)
      {
        sws_scale(img_convert_ctx, pFrame->data, pFrame->linesize, 0, pCodecCtx->height, pFrameRGB->data, pFrameRGB->linesize);
        if(++i<=20)
        {
          SaveFrame(pFrameRGB, pCodecCtx->width, pCodecCtx->height, i);
        }

      }
    }

  av_free_packet(&packet);
  }

  free(out_buffer);
  av_free(pFrameRGB);

  // Free the YUV frame
  av_free(pFrame);

  // Close the codec
  avcodec_close(pCodecCtx);

  // Close the video file
  avformat_close_input(&pFormatCtx);


  return 0;
}

编译指令:
gcc -o test main.c -I/usr/local/ffmpeg/include -L/usr/local/ffmpeg/lib -lavutil -lavformat -lavcodec -lswscale -lz

sdl,ffmpeg都调用的编译指令:
gcc -o test main.c -I/usr/local/ffmpeg/include -I/usr/local/sdl/include -L/usr/local/ffmpeg/lib -L/usr/local/sdl/lib -lavutil -lavformat -lavcodec -lswscale -lz -lSDL2

 

读取视屏文件,保存帧图片为ppm文件

标签:

原文地址:http://www.cnblogs.com/zhangxuan/p/5564017.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!