码迷,mamicode.com
首页 > 其他好文 > 详细

ns3 myfirst.cc 两个节点点对点通信

时间:2016-07-14 18:52:46      阅读:1646      评论:0      收藏:0      [点我收藏+]

标签:

首先在ns3.25/examples/tutorial/下找到 first.cc文件,将他拷贝到到scratch目录下。

 

然后为了方便将代码打出来

/* -*- Mode:C++; c-file-style:"gnu"; indent-tabs-mode:nil; -*- */
/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation;
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#include "ns3/core-module.h"
#include "ns3/network-module.h"
#include "ns3/internet-module.h"
#include "ns3/point-to-point-module.h"
#include "ns3/applications-module.h"

using namespace ns3;

NS_LOG_COMPONENT_DEFINE ("FirstScriptExample");

int
main (int argc, char *argv[])
{
  Time::SetResolution (Time::NS);
  LogComponentEnable ("UdpEchoClientApplication", LOG_LEVEL_INFO);
  LogComponentEnable ("UdpEchoServerApplication", LOG_LEVEL_INFO);

  NodeContainer nodes;
  nodes.Create (2);

  PointToPointHelper pointToPoint;
  pointToPoint.SetDeviceAttribute ("DataRate", StringValue ("5Mbps"));
  pointToPoint.SetChannelAttribute ("Delay", StringValue ("2ms"));

  NetDeviceContainer devices;
  devices = pointToPoint.Install (nodes);

  InternetStackHelper stack;
  stack.Install (nodes);

  Ipv4AddressHelper address;
  address.SetBase ("10.1.1.0", "255.255.255.0");

  Ipv4InterfaceContainer interfaces = address.Assign (devices);

  UdpEchoServerHelper echoServer (9);

  ApplicationContainer serverApps = echoServer.Install (nodes.Get (1));
  serverApps.Start (Seconds (1.0));
  serverApps.Stop (Seconds (10.0));

  UdpEchoClientHelper echoClient (interfaces.GetAddress (1), 9);
  echoClient.SetAttribute ("MaxPackets", UintegerValue (2));
  echoClient.SetAttribute ("Interval", TimeValue (Seconds (1.0)));
  echoClient.SetAttribute ("PacketSize", UintegerValue (1024));

  ApplicationContainer clientApps = echoClient.Install (nodes.Get (0));
  clientApps.Start (Seconds (2.0));
  clientApps.Stop (Seconds (10.0));

  Simulator::Run ();
  Simulator::Destroy ();
  return 0;
}

 

首先研究头文件

#include "ns3/core-module.h"
#include "ns3/network-module.h"
#include "ns3/internet-module.h"
#include "ns3/point-to-point-module.h"
#include "ns3/applications-module.h"

 这些头文件都被存放在build目录下的一个ns3的目录下,我们可以根据自己所需要的功能引用相应的头文件进来

 

using namespace ns3;

 ns3的命名空间,这样我们就可以不用再写 ns3::xxx ,否则会编译错误。

 

NS_LOG_COMPONENT_DEFINE ("FirstScriptExample");

 日志组件,这句话一看上去有点蒙,实际上的功能就是 生成一个名字为“FirstScriptExample"的日志组件。

 

Time::SetResolution (Time::NS);

 设置时间单位为纳秒,虽然我不是很明白为什么要设置时间单位为纳秒??这个是百度得到的 存在疑点

 

  LogComponentEnable ("UdpEchoClientApplication", LOG_LEVEL_INFO);
  LogComponentEnable ("UdpEchoServerApplication", LOG_LEVEL_INFO);

 是两个日志组件生效,并且日志级别设置为INFO,这个两个日志是内建在Echo Client和Echo Sever的应用中。等下会有用到。

 

  NodeContainer nodes;
  nodes.Create (2);

 这句话差不多就是 声明一个节点容器 nodes,然后在李勇Create(2)生成两个节点。

 

  PointToPointHelper pointToPoint;
  pointToPoint.SetDeviceAttribute ("DataRate", StringValue ("5Mbps"));
  pointToPoint.SetChannelAttribute ("Delay", StringValue ("2ms"));

 这个PointToPointHelper类负责来设置网络设备和信道属性。

其中把网络设备中“DateRate"数据速率设置为5Mbps,信道属性的延迟设置为2ms.  这个等下会在后面的生成结果,以及自己所学网络知识解释一下他用在什么地方。

 

  NetDeviceContainer devices;
  devices = pointToPoint.Install (nodes);

 前面已经完成了用NodeContainer来创建节点,用PointToPointHelper来做关于创建、配置、安装的工作。现在他们两个之间执需要连接起来。需要一个NetDevices对象列表,可以通过NetDeviceContainer来存放他们,就像使用第一个NodeContainer对象来存放自身所创建的节点一样。

PointToPointHelper的Install()方法一个NodeContainer对象作为一个参数,以一个NetDevice Container为返回对象。

对于NodeContainer的每一个节点,因为这里建立的是点对点的信道,所以明确的2个节点。一个PointToPointChannel对象被创建,2个PointToPointNetDevices和他连接。

所以最终就得到了,两个节点,每个节点安装了点到点网络设备,这两个网络设备之间安装了点到点的信道,2个设备会被配置在一个有2ms传输时延的信道上以5Mbps的速率传送数据。

 

  InternetStackHelper stack;
  stack.Install (nodes);

 InternetStackHelper会为NodeContainer的每一个Node安装一个网络协议。

 

 Ipv4AddressHelper address;
  address.SetBase ("10.1.1.0", "255.255.255.0");

 Ipv4AddressHelper为节点上的设备设置IP地址。通过SetBase方法告诉它从10.1.1.0开始以子网掩码为255.255.255.0分配地址,地址分配默认是从1开始单调增长。

 

 

  Ipv4InterfaceContainer interfaces = address.Assign (devices);

 这个代码完成了地址配置, ns3中使用Ipv4Interface对象将一个IP地址同一个设备关联起来。而Ipv4InterfaceContainer提供了这样的功能,作为Ipv4Interface对象的容器。

 

到这里已经完成了一个 安装了了协议栈,配置了IP地址类的点到点的网络。 现在就是要用它做数据通信。

 

  UdpEchoServerHelper echoServer (9);

  ApplicationContainer serverApps = echoServer.Install (nodes.Get (1));
  serverApps.Start (Seconds (1.0));
  serverApps.Stop (Seconds (10.0));

 

声明了一个UdpEchoServerHelper 像其他Help类一样这个也不是应用本身,而是一个用来创建真正应用的对象,其中端口为9号端口。

并在刚刚NodeContainer里面的2号节点 这里0为1号节点,1为2号节点。装入服务器应用,同样的这个的返回是一个Application对象,需要一个ApplicationContainer作为容器来存储

应用对象需要一个时间参数 ,开始以及停止 ,这里两行使得echo服务应用在1s时开始,在10s的时候停止。

 

 UdpEchoClientHelper echoClient (interfaces.GetAddress (1), 9);
  echoClient.SetAttribute ("MaxPackets", UintegerValue (2));
  echoClient.SetAttribute ("Interval", TimeValue (Seconds (1.0)));
  echoClient.SetAttribute ("PacketSize", UintegerValue (1024));

 同样的客户端应用,首先给客户端的 UdpEchoClientHelper类 传入要客户端要发送数据到的IP地址,以及端口号,这里设置的是服务器的设备IP地址,以及刚刚设置接受9号端口。

MaxPackets为在模拟期间能发送的最多的分组个数

Interval 为两个分组的要等待多少时间

PacketSize 为每个分组承载多少数据。 这里的参数1024是字节,不是位!!!

 

ApplicationContainer clientApps = echoClient.Install (nodes.Get (0));
clientApps.Start (Seconds (2.0));
clientApps.Stop (Seconds (10.0));

 

 然后再用同样的方法,把一号节点作为客户端,把客户端应用装在一号节点上,

应用开始服务为2s,结束服务为10s

至于为什么是2s开始,我也是有点蒙,查了有关资料,说是要等服务器生效1s后才开始作为服务比较合理。也可以通过改变上面参数为1,这是客户端就变成了1s的时候开始服务,就是1s时候开始发送数据。

 

  Simulator::Run ();
  Simulator::Destroy ();

 启动模拟器,Simulator::Run(),系统会开始遍历预设事件的列表并执行。

执行完毕用,就调用Simulator::Destory()来销毁刚刚所创建的一系列东西。

 

在eclipse下执行

 

技术分享

运行结果

这是发送一个包,即客户端发送一个1024字节的分组到服务器,而这里客户端的端口我觉得应该是随机设定的,因为从头到尾就没有碰到过49153端口。

而为什么是 2.00369s才收到 我做了一个运算 即在2s的基础上  2s+1024*8/(5*10^6)(发送时延)s+0.002s(传输时延)=2.0036384s 与20.00369s还有一定差距,可差距已经很小,所以个人觉得把那部分时延可以视为处理时延(这里不存在排队时延).

ns3 myfirst.cc 两个节点点对点通信

标签:

原文地址:http://www.cnblogs.com/wpqwpq/p/5671177.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!