标签：message uptime 开机 bsp ice code padding 指定 idt
1.使用uptime查看开机时间
130|shell@HWPLK:/ $ uptime
up time: 00:12:32, idle time: 01:28:59, sleep time: 00:00:00
2.使用screenrecord录制屏幕
$ adb shell screenrecord --helpUsage: screenrecord [options] <filename>Records the device‘s display to a .mp4 file.Options:--size WIDTHxHEIGHT Set the video size, e.g. "1280x720". Default is the device‘s main display resolution (if supported), 1280x720 if not. For best results, use a size supported by the AVC encoder.--bit-rate RATE Set the video bit rate, in megabits per second. Default 4Mbps.--time-limit TIME Set the maximum recording time, in seconds. Default / maximum is 180.--rotate Rotate the output 90 degrees.--verbose Display interesting information on stdout.--help Show this message.Recording continues until Ctrl-C is hit or the time limit is reached.screenrecord使用举例
(1). 基本使用
|
1
2
|
// 录制默认分辨率，默认4Mbps，默认180s的视频，保存到sdcard上名为FILENAME.mp4$adb shell screenrecord /sdcard/FILENAME.mp4 |
(2). 指定分辨率(参数：--size)
|
1
2
|
// 分辨率为112x112,建议不要指定分辨率，使用默认分辨率效果最佳$adb shell screenrecord --size 112x112 /sdcard/FILENAME.mp4 |
注意，分辨率不是完全可以随意定制的，比如在我手机上录制100x100的会提示错误：
|
1
2
3
4
|
// 100x100不支持，建议设为112x112$adb shell screenrecord --size 100x100 /sdcard/FILENAME.mp4The max width/height supported by codec is 1920x1088100x100 is not supported by codec, suggest to set it as 112x112 |
(3). 指定比特率(参数：--bit-rate)
|
1
2
|
// 设置比特率为8Mbps，比特率越大，文件越大，画面越清晰$adb shell screenrecord --bit-rate 8000000 /sdcard/FILENAME.mp4 |
(4). 旋转(参数：--rotate)
|
1
2
|
// 旋转90度$adb shell screenrecord --rotate /sdcard/FILENAME.mp4 |
android shell命令screenrecord和uptime
标签：message uptime 开机 bsp ice code padding 指定 idt
原文地址：http://www.cnblogs.com/xiayexingkong/p/6138402.html
