码迷,mamicode.com
首页 > 其他好文 > 详细

AZURE云上 mkfs.ext4 /dev/sdc 导致宕机问题解决纪实

时间:2017-08-13 13:29:39      阅读:254      评论:0      收藏:0      [点我收藏+]

标签:blocks   extra   decide   hang   start   nim   mkdir   lis   check   

1mkfs.ext4down

Azure上新建的vm。准备安装oracle数据库,可是挂载的磁盘,初始化后,直接down机了。例如以下图。失去连接,xshell窗体直接断开退出了。看以下图片

技术分享

021.png

 

尝试过一下办法:

 

(1)      azure管理界面。重新启动vm。再来一遍。还是down机。

(2)      删除这台vm,重建一台新的vm。还是一样仅仅要运行mkfs.ext4 /dev/sdc直接down机。

(3)      在别的区建vm。不在东区建在北区建。还是一样。

 

 

2、问题分析

曾经附加的磁盘,直接mkfs.ext4 /dev/sdc就能够了。如今为啥不行?去fdisk看磁盘信息:

(1)如今的fdisk –l中的/dev/sdc信息:

Disk /dev/sdc: 1098.4 GB, 1098437885952 bytes

255 heads, 63 sectors/track, 133544 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

 

(2)曾经的fdisk –l中的/dev/sdc信息:

Disk /dev/sdd: 1073.7 GB, 1073741824000 bytes

255 heads, 63 sectors/track, 130541 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000

 

看到多了“Disk identifier: 0x00000000”信息,正式由于多了这个Disk identifier。才干直接进行mkfs.ext4了。

 

经过google之后,发现Disk identifier须要先分好区才会有。所以新的/dev/sdc磁盘不能直接mkfs.ext4的原因是还没有分好区,要用fdisk分好区之后。再能进行初始化操作。

 

3fdisk磁盘分区

用fdisk进行磁盘分区:

[root@pldb2 ~]# fdisk /dev/sdc

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel with disk identifier 0xd788cc0a.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won‘t be recoverable.

 

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

 

WARNING: DOS-compatible mode is deprecated. It‘s strongly recommended to

         switch off the mode (command ‘c‘) and change display units to

         sectors (command ‘u‘).

 

Command (m for help): n

Command action

   e   extended

   p   primary partition (1-4)

p

Partition number (1-4): 1

First cylinder (1-133544, default 1):

Using default value 1

Last cylinder, +cylinders or +size{K,M,G} (1-133544, default 133544):

Using default value 133544

 

Command (m for help): m

Command action

   a   toggle a bootable flag

   b   edit bsd disklabel

   c   toggle the dos compatibility flag

   d   delete a partition

   l   list known partition types

   m   print this menu

   n   add a new partition

   o   create a new empty DOS partition table

   p   print the partition table

   q   quit without saving changes

   s   create a new empty Sun disklabel

   t   change a partition‘s system id

   u   change display/entry units

   v   verify the partition table

   w   write table to disk and exit

   x   extra functionality (experts only)

 

Command (m for help): w

The partition table has been altered!

 

Calling ioctl() to re-read partition table.

Syncing disks.

[root@pldb2 ~]#

 

 

再次查看,会有Disk identifier信息了。也有了新的分区/dev/sdc1,例如以下:

[root@pldb2 ~]# fdisk -l

 

Disk /dev/sda: 32.2 GB, 32212254720 bytes

255 heads, 63 sectors/track, 3916 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x000c23d3

 

   Device Boot      Start         End      Blocks   Id  System

/dev/sda1   *           1        3789    30432256   83  Linux

/dev/sda2            3789        3917     1024000   82  Linux swap / Solaris

 

Disk /dev/sdb: 240.5 GB, 240518168576 bytes

255 heads, 63 sectors/track, 29241 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x40a7f99c

 

   Device Boot      Start         End      Blocks   Id  System

/dev/sdb1               1       29242   234879936   83  Linux

Disk /dev/sdc: 1098.4 GB, 1098437885952 bytes

255 heads, 63 sectors/track, 133544 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xd788cc0a

 

   Device Boot      Start         End      Blocks   Id  System

/dev/sdc1               1      133544  1072692148+  83  Linux

 

 

 

 

4mkfs.ext4进行分区初始化

# 使用 mkfs.ext4 命令格式化磁盘成格式化成ext4各式的文件系统。

[root@pldb2 ~]# mkfs.ext4 /dev/sdc1

mke2fs 1.41.12 (17-May-2010)

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

67043328 inodes, 268173037 blocks

13408651 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=4294967296

8184 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks:

         32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,

         4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,

         102400000, 214990848

 

Writing inode tables: done                           

Creating journal (32768 blocks): done

Writing superblocks and filesystem accounting information: done

 

This filesystem will be automatically checked every 27 mounts or

180 days, whichever comes first.  Use tune2fs -c or -i to override.

[root@pldb2 ~]#

 

 

例如以下图所看到的:

技术分享

22.png



5、挂载磁盘加入启动载入

1)開始挂载新的分区磁盘到/oracle

[root@pldb2 ~]# mkdir /oracle

[root@pldb2 ~]# mount /dev/sdc1 /oracle

[root@pldb2 ~]#

 

2)开机启动挂载配置

[root@pldb2 ~]# vim /etc/fstab

You have new mail in /var/spool/mail/root

[root@pldb2 ~]# more /etc/fstab

 

#

# /etc/fstab

# Created by anaconda on Wed Jan 15 04:45:47 2014

#

# Accessible filesystems, by reference, are maintained under ‘/dev/disk‘

# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info

#

UUID=6d089360-3e14-401d-91d0-378f3fd09332 /                       ext4    defaults        1 1

/dev/sdc1                /oracle                   ext4    defaults        1 2

tmpfs                   /dev/shm                tmpfs   defaults        0 0

devpts                  /dev/pts                devpts  gid=5,mode=620  0 0

sysfs                   /sys                    sysfs   defaults        0 0

proc                    /proc                   proc    defaults        0 0

[root@pldb2 ~]#

 

 

 

OK。磁盘已经准备好了,能够正常安装oracle数据库了。

 

AZURE云上 mkfs.ext4 /dev/sdc 导致宕机问题解决纪实

标签:blocks   extra   decide   hang   start   nim   mkdir   lis   check   

原文地址:http://www.cnblogs.com/wzjhoutai/p/7352857.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!