master_ip_failover_script问题终极解决方案

[root@kube-node5 run]# masterha_check_repl --conf=/etc/mha/app2.cnf
Wed Aug 15 14:47:52 2018 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Wed Aug 15 14:47:52 2018 - [info] Reading application default configuration from /etc/mha/app2.cnf..
Wed Aug 15 14:47:52 2018 - [info] Reading server configuration from /etc/mha/app2.cnf..
Wed Aug 15 14:47:52 2018 - [info] MHA::MasterMonitor version 0.58.
Wed Aug 15 14:47:53 2018 - [info] GTID failover mode = 1
Wed Aug 15 14:47:53 2018 - [info] Dead Servers:
Wed Aug 15 14:47:53 2018 - [info] Alive Servers:
Wed Aug 15 14:47:53 2018 - [info]   192.168.152.156(192.168.152.156:3306)
Wed Aug 15 14:47:53 2018 - [info]   192.168.152.157(192.168.152.157:3306)
Wed Aug 15 14:47:53 2018 - [info]   192.168.152.158(192.168.152.158:3306)
Wed Aug 15 14:47:53 2018 - [info] Alive Slaves:
Wed Aug 15 14:47:53 2018 - [info]   192.168.152.157(192.168.152.157:3306)  Version=5.7.23-log (oldest major version between slaves) log-bin:enabled
Wed Aug 15 14:47:53 2018 - [info]     GTID ON
Wed Aug 15 14:47:53 2018 - [info]     Replicating from 192.168.152.156(192.168.152.156:3306)
Wed Aug 15 14:47:53 2018 - [info]     Primary candidate for the new Master (candidate_master is set)
Wed Aug 15 14:47:53 2018 - [info]   192.168.152.158(192.168.152.158:3306)  Version=5.7.23-log (oldest major version between slaves) log-bin:enabled
Wed Aug 15 14:47:53 2018 - [info]     GTID ON
Wed Aug 15 14:47:53 2018 - [info]     Replicating from 192.168.152.156(192.168.152.156:3306)
Wed Aug 15 14:47:53 2018 - [info]     Not candidate for the new Master (no_master is set)
Wed Aug 15 14:47:53 2018 - [info] Current Alive Master: 192.168.152.156(192.168.152.156:3306)
Wed Aug 15 14:47:53 2018 - [info] Checking slave configurations..
Wed Aug 15 14:47:53 2018 - [info] Checking replication filtering settings..
Wed Aug 15 14:47:53 2018 - [info]  binlog_do_db= , binlog_ignore_db= 
Wed Aug 15 14:47:53 2018 - [info]  Replication filtering check ok.
Wed Aug 15 14:47:53 2018 - [info] GTID (with auto-pos) is supported. Skipping all SSH and Node package checking.
Wed Aug 15 14:47:53 2018 - [info] Checking SSH publickey authentication settings on the current master..
Wed Aug 15 14:47:53 2018 - [info] HealthCheck: SSH to 192.168.152.156 is reachable.
Wed Aug 15 14:47:53 2018 - [info] 
192.168.152.156(192.168.152.156:3306) (current master)
 +--192.168.152.157(192.168.152.157:3306)
 +--192.168.152.158(192.168.152.158:3306)

Wed Aug 15 14:47:53 2018 - [info] Checking replication health on 192.168.152.157..
Wed Aug 15 14:47:53 2018 - [info]  ok.
Wed Aug 15 14:47:53 2018 - [info] Checking replication health on 192.168.152.158..
Wed Aug 15 14:47:53 2018 - [info]  ok.
Wed Aug 15 14:47:53 2018 - [info] Checking master_ip_failover_script status:
Wed Aug 15 14:47:53 2018 - [info] ====1====  /etc/mha/run/failover3 --command=status --ssh_user=root --orig_master_host=192.168.152.156 --orig_master_ip=192.168.152.156 --orig_master_port=3306 
: No such file or directory
Wed Aug 15 14:47:53 2018 - [error][/usr/share/perl5/vendor_perl/MHA/MasterMonitor.pm, ln229]  Failed to get master_ip_failover_script status with return code 127:0.
Wed Aug 15 14:47:53 2018 - [error][/usr/share/perl5/vendor_perl/MHA/MasterMonitor.pm, ln427] Error happened on checking configurations.  at /usr/bin/masterha_check_repl line 48.
Wed Aug 15 14:47:53 2018 - [error][/usr/share/perl5/vendor_perl/MHA/MasterMonitor.pm, ln525] Error happened on monitoring servers.
Wed Aug 15 14:47:53 2018 - [info] Got exit code 1 (Not master dead).

MySQL Replication Health is NOT OK!

#!/usr/bin/env perl

#  Copyright (C) 2011 DeNA Co.,Ltd.
#  You should have received a copy of the GNU General Public License
#   along with this program; if not, write to the Free Software
#  Foundation, Inc.,
#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

## Note: This is a sample script and is not complete. Modify the script based on your environment.

use strict;
use warnings FATAL => ‘all‘;

use Getopt::Long;
use MHA::DBHelper;

my (
  $command,        $ssh_user,         $orig_master_host,
  $orig_master_ip, $orig_master_port, $new_master_host,
  $new_master_ip,  $new_master_port,  $new_master_user,
  $new_master_password
);

my $vip = ‘192.168.152.159/24‘;
my $key = ‘88‘;
my $ssh_start_vip = "/sbin/ifconfig ens33:$key $vip";
my $ssh_stop_vip = "/sbin/ifconfig ens33:$key down";
GetOptions(
  ‘command=s‘             => \$command,
  ‘ssh_user=s‘            => \$ssh_user,
  ‘orig_master_host=s‘    => \$orig_master_host,
  ‘orig_master_ip=s‘      => \$orig_master_ip,
  ‘orig_master_port=i‘    => \$orig_master_port,
  ‘new_master_host=s‘     => \$new_master_host,
  ‘new_master_ip=s‘       => \$new_master_ip,
  ‘new_master_port=i‘     => \$new_master_port,
  ‘new_master_user=s‘     => \$new_master_user,
  ‘new_master_password=s‘ => \$new_master_password,
);

exit &main();

sub main {
    print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n";
    if ( $command eq "stop" || $command eq "stopssh" ) {
        my $exit_code = 1;
        eval {
            print "Disabling the VIP on old master: $orig_master_host \n";
            &stop_vip();
            $exit_code = 0;
        };
        if ($@) {
            warn "Got Error: $@\n";
            exit $exit_code;
        }
        exit $exit_code;
    }
    elsif ( $command eq "start" ) {
        my $exit_code = 10;
        eval {
            print "Enabling the VIP - $vip on the new master - $new_master_host \n";
            &start_vip();
            $exit_code = 0;
        };
        if ($@) {
            warn $@;
            exit $exit_code;
        }
        exit $exit_code;
    }
    elsif ( $command eq "status" ) {
        print "Checking the Status of the script.. OK \n";
        exit 0;
    }
    else {
        &usage();
        exit 1;
    }
}
sub start_vip() {
    `ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
sub stop_vip() {
     return 0  unless  ($ssh_user);
    `ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}
sub usage {
  print
"Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
}