码迷,mamicode.com
首页 > 其他好文 > 详细

20-字符串

时间:2019-03-04 19:08:54      阅读:166      评论:0      收藏:0      [点我收藏+]

标签:检测   dig   \n   upper   标题   strong   eric   int   ali   

字符串的定义

  • 字符串 就是 一串字符,是编程语言中表示文本的数据类型

  • 在 Python 中可以使用 一对双引号 " 或者 一对单引号 ‘ 定义一个字符串

    • 虽然可以使用 \" 或者 \‘ 做字符串的转义,但是在实际开发中:

      • 如果字符串内部需要使用 ",可以使用 ‘ 定义字符串

      • 如果字符串内部需要使用 ‘,可以使用 " 定义字符串

  • 可以使用 索引 获取一个字符串中 指定位置的字符,索引计数从 0 开始

  • 也可以使用 for 循环遍历 字符串中每一个字符

大多数编程语言都是用 " 来定义字符串

In [1]: hello_str.
hello_str.capitalize    hello_str.isidentifier  hello_str.rindex
hello_str.casefold      hello_str.islower       hello_str.rjust
hello_str.center        hello_str.isnumeric     hello_str.rpartition
hello_str.count         hello_str.isprintable   hello_str.rsplit
hello_str.encode        hello_str.isspace       hello_str.rstrip
hello_str.endswith      hello_str.istitle       hello_str.split
hello_str.expandtabs    hello_str.isupper       hello_str.splitlines
hello_str.find          hello_str.join          hello_str.startswith
hello_str.format        hello_str.ljust         hello_str.strip
hello_str.format_map    hello_str.lower         hello_str.swapcase
hello_str.index         hello_str.lstrip        hello_str.title
hello_str.isalnum       hello_str.maketrans     hello_str.translate
hello_str.isalpha       hello_str.partition     hello_str.upper
hello_str.isdecimal     hello_str.replace       hello_str.zfill
hello_str.isdigit       hello_str.rfind

1) 判断类型 - 9

方法说明
string.isspace() 如果 string 中只包含空格,则返回 True
string.isalnum() 如果 string 至少有一个字符并且所有字符都是字母或数字则返回 True
string.isalpha() 如果 string 至少有一个字符并且所有字符都是字母则返回 True
string.isdecimal() 如果 string 只包含数字则返回 True,全角数字
string.isdigit() 如果 string 只包含数字则返回 True,全角数字、⑴、\u00b2
string.isnumeric() 如果 string 只包含数字则返回 True,全角数字,汉字数字
string.istitle() 如果 string 是标题化的(每个单词的首字母大写)则返回 True
string.islower() 如果 string 中包含至少一个区分大小写的字符,并且所有这些(区分大小写的)字符都是小写,则返回 True
string.isupper() 如果 string 中包含至少一个区分大小写的字符,并且所有这些(区分大小写的)字符都是大写,则返回 True

2) 查找和替换 - 7

方法说明
string.startswith(str) 检查字符串是否是以 str 开头,是则返回 True
string.endswith(str) 检查字符串是否是以 str 结束,是则返回 True
string.find(str, start=0, end=len(string)) 检测 str 是否包含在 string 中,如果 start 和 end 指定范围,则检查是否包含在指定范围内,如果是返回开始的索引值,否则返回 -1
string.rfind(str, start=0, end=len(string)) 类似于 find(),不过是从右边开始查找
string.index(str, start=0, end=len(string)) 跟 find() 方法类似,不过如果 str 不在 string 会报错
string.rindex(str, start=0, end=len(string)) 类似于 index(),不过是从右边开始
string.replace(old_str, new_str, num=string.count(old)) 把 string 中的 old_str 替换成 new_str,如果 num 指定,则替换不超过 num 次

3) 大小写转换 - 5

方法说明
string.capitalize() 把字符串的第一个字符大写
string.title() 把字符串的每个单词首字母大写
string.lower() 转换 string 中所有大写字符为小写
string.upper() 转换 string 中的小写字母为大写
string.swapcase() 翻转 string 中的大小写

4) 文本对齐 - 3

方法说明
string.ljust(width) 返回一个原字符串左对齐,并使用空格填充至长度 width 的新字符串
string.rjust(width) 返回一个原字符串右对齐,并使用空格填充至长度 width 的新字符串
string.center(width) 返回一个原字符串居中,并使用空格填充至长度 width 的新字符串

5) 去除空白字符 - 3

方法说明
string.lstrip() 截掉 string 左边(开始)的空白字符
string.rstrip() 截掉 string 右边(末尾)的空白字符
string.strip() 截掉 string 左右两边的空白字符

6) 拆分和连接 - 5

方法说明
string.partition(str) 把字符串 string 分成一个 3 元素的元组 (str前面, str, str后面)
string.rpartition(str) 类似于 partition() 方法,不过是从右边开始查找
string.split(str="", num) 以 str 为分隔符拆分 string,如果 num 有指定值,则仅分隔 num + 1 个子字符串,str 默认包含 ‘\r‘, ‘\t‘, ‘\n‘ 和空格
string.splitlines() 按照行(‘\r‘, ‘\n‘, ‘\r\n‘)分隔,返回一个包含各行作为元素的列表
string.join(seq) 以 string 作为分隔符,将 seq 中所有的元素(的字符串表示)合并为一个新的字符串

 

20-字符串

标签:检测   dig   \n   upper   标题   strong   eric   int   ali   

原文地址:https://www.cnblogs.com/hbzxpost/p/10472184.html

踩
(0)
赞
(0)
   
举报
评论 一句话评论(0)
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!