码迷,mamicode.com
首页 > 其他好文 > 详细

Greenplum 添加mirror步骤

时间:2019-08-09 15:18:54      阅读:133      评论:0      收藏:0      [点我收藏+]

标签:报错   完成   步骤   pst   min   lan   reg   系统   markdown   

原文链接:https://yq.aliyun.com/articles/695864

[TOC]

概述

新安装的greenplum集群只有primary节点,没有mirror。高可用性没得到保证。所以就需要为集群添加mirror节点

注意:数据量过大时添加mirror,会有较大的磁盘压力,因为后台会一直同步数据,这一点线上系统需要注意

添加前情况

初始化的时候只有primary 

        gpstate -b

  1.  
    20190326:00:48:33:005423 gpinitsystem:gw_mdw1:gpadmin-[INFO]:-Greenplum Primary Segment Configuration
  2.  
    20190326:00:48:33:005423 gpinitsystem:gw_mdw1:gpadmin-[INFO]:----------------------------------------
  3.  
    20190326:00:48:33:005423 gpinitsystem:gw_mdw1:gpadmin-[INFO]:-gw_sdw1 /data/primary/gpseg0 40000 2 0
  4.  
    20190326:00:48:33:005423 gpinitsystem:gw_mdw1:gpadmin-[INFO]:-gw_sdw1 /data/primary/gpseg1 40001 3 1
  5.  
    20190326:00:48:33:005423 gpinitsystem:gw_mdw1:gpadmin-[INFO]:-gw_sdw1 /data/primary/gpseg2 40002 4 2
  6.  
    20190326:00:48:33:005423 gpinitsystem:gw_mdw1:gpadmin-[INFO]:-gw_sdw1 /data/primary/gpseg3 40003 5 3
  7.  
    20190326:00:48:33:005423 gpinitsystem:gw_mdw1:gpadmin-[INFO]:-gw_sdw2 /data/primary/gpseg4 40000 6 4
  8.  
    20190326:00:48:33:005423 gpinitsystem:gw_mdw1:gpadmin-[INFO]:-gw_sdw2 /data/primary/gpseg5 40001 7 5
  9.  
    20190326:00:48:33:005423 gpinitsystem:gw_mdw1:gpadmin-[INFO]:-gw_sdw2 /data/primary/gpseg6 40002 8 6
  10.  
    20190326:00:48:33:005423 gpinitsystem:gw_mdw1:gpadmin-[INFO]:-gw_sdw2 /data/primary/gpseg7 40003 9 7
  11.  
    Continue with Greenplum creation Yy/Nn>

查看系统配置表,发现只有primary节点

  1.  
    postgres=# SELECT * from gp_segment_configuration ;
  2.  
    dbid | content | role | preferred_role | mode | status | port | hostname | address | replication_port | san_mounts
  3.  
    ------+---------+------+----------------+------+--------+-------+----------+---------+------------------+------------
  4.  
    1 | -1 | p | p | s | u | 5432 | gw_mdw1 | gw_mdw1 | |
  5.  
    2 | 0 | p | p | s | u | 40000 | gw_sdw1 | gw_sdw1 | |
  6.  
    6 | 4 | p | p | s | u | 40000 | gw_sdw2 | gw_sdw2 | |
  7.  
    3 | 1 | p | p | s | u | 40001 | gw_sdw1 | gw_sdw1 | |
  8.  
    7 | 5 | p | p | s | u | 40001 | gw_sdw2 | gw_sdw2 | |
  9.  
    4 | 2 | p | p | s | u | 40002 | gw_sdw1 | gw_sdw1 | |
  10.  
    8 | 6 | p | p | s | u | 40002 | gw_sdw2 | gw_sdw2 | |
  11.  
    5 | 3 | p | p | s | u | 40003 | gw_sdw1 | gw_sdw1 | |
  12.  
    9 | 7 | p | p | s | u | 40003 | gw_sdw2 | gw_sdw2 | |
  13.  
    (9 rows)

添加步骤

在所有需要添加mirror的主机,创建存放mirror的数据目录

可以使用gpssh命令

gpssh -f seg_hosts -e ‘mkdir -p /data/mirror‘
 

生成addmirror文件

执行gpaddmirrors 命令,键入存放mirror节点的日志,生成配置文件

  1.  
    [gpadmin@gw_mdw1 ~]$ gpaddmirrors -o ./addmirror
  2.  
    20190326:00:56:21:030831 gpaddmirrors:gw_mdw1:gpadmin-[INFO]:-Starting gpaddmirrors with args: -o ./addmirror
  3.  
    20190326:00:56:21:030831 gpaddmirrors:gw_mdw1:gpadmin-[INFO]:-local Greenplum Version: ‘postgres (Greenplum Database) 4.3.1.0 build 6‘
  4.  
    20190326:00:56:21:030831 gpaddmirrors:gw_mdw1:gpadmin-[INFO]:-master Greenplum Version: ‘PostgreSQL 8.2.15 (Greenplum Database 4.3.1.0 build 6) on x86_64-unknown-linux-gnu, compiled by GCC gcc (GCC) 4.4.2 compiled on Jun 11 2014 17:23:40‘
  5.  
    20190326:00:56:21:030831 gpaddmirrors:gw_mdw1:gpadmin-[INFO]:-Obtaining Segment details from master...
  6.  
    Enter mirror segment data directory location 1 of 4 >
  7.  
    /data/mirror
  8.  
    Enter mirror segment data directory location 2 of 4 >
  9.  
    /data/mirror
  10.  
    Enter mirror segment data directory location 3 of 4 >
  11.  
    /data/mirror
  12.  
    Enter mirror segment data directory location 4 of 4 >
  13.  
    /data/mirror
  14.  
    20190326:00:57:15:030831 gpaddmirrors:gw_mdw1:gpadmin-[INFO]:-Configuration file output to ./addmirror successfully.

查看文件内容如下

  1.  
    [gpadmin@gw_mdw1 ~]$ cat addmirror
  2.  
    filespaceOrder=
  3.  
    mirror0=0:gw_sdw2:41000:42000:43000:/data/mirror/gpseg0
  4.  
    mirror1=1:gw_sdw2:41001:42001:43001:/data/mirror/gpseg1
  5.  
    mirror2=2:gw_sdw2:41002:42002:43002:/data/mirror/gpseg2
  6.  
    mirror3=3:gw_sdw2:41003:42003:43003:/data/mirror/gpseg3
  7.  
    mirror4=4:gw_sdw1:41000:42000:43000:/data/mirror/gpseg4
  8.  
    mirror5=5:gw_sdw1:41001:42001:43001:/data/mirror/gpseg5
  9.  
    mirror6=6:gw_sdw1:41002:42002:43002:/data/mirror/gpseg6
  10.  
    mirror7=7:gw_sdw1:41003:42003:43003:/data/mirror/gpseg7

执行添加命令

  1.  
    [gpadmin@gw_mdw1 ~]$ gpaddmirrors -i addmirror
  2.  
    20190326:01:08:45:031106 gpaddmirrors:gw_mdw1:gpadmin-[INFO]:-Starting gpaddmirrors with args: -i addmirror
  3.  
    20190326:01:08:45:031106 gpaddmirrors:gw_mdw1:gpadmin-[INFO]:-local Greenplum Version: ‘postgres (Greenplum Database) 4.3.1.0 build 6‘
  4.  
    20190326:01:08:45:031106 gpaddmirrors:gw_mdw1:gpadmin-[INFO]:-master Greenplum Version: ‘PostgreSQL 8.2.15 (Greenplum Database 4.3.1.0 build 6) on x86_64-unknown-linux-gnu, compiled by GCC gcc (GCC) 4.4.2 compiled on Jun 11 2014 17:23:40‘

命令没有报错,查看mirror节点的情况

使用gpstate -m查看,发现所有的mirror正在同步数据,因为我的集群新建,很快就同步完成了,此时再执行gpstate -m就可以看到Data Status的状态是Synchronized(已同步的)

  1.  
    [gpadmin@gw_mdw1 ~]$ gpstate -m
  2.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:-Starting gpstate with args: -m
  3.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:-local Greenplum Version: ‘postgres (Greenplum Database) 4.3.1.0 build 6‘
  4.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:-master Greenplum Version: ‘PostgreSQL 8.2.15 (Greenplum Database 4.3.1.0 build 6) on x86_64-unknown-linux-gnu, compiled by GCC gcc (GCC) 4.4.2 compiled on Jun 11 2014 17:23:40‘
  5.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:-Obtaining Segment details from master...
  6.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:--------------------------------------------------------------
  7.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:--Current GPDB mirror list and status
  8.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:--Type = Group
  9.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:--------------------------------------------------------------
  10.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:- Mirror Datadir Port Status Data Status
  11.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:- gw_sdw2 /data/mirror/gpseg0 41000 Passive Resynchronizing
  12.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:- gw_sdw2 /data/mirror/gpseg1 41001 Passive Resynchronizing
  13.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:- gw_sdw2 /data/mirror/gpseg2 41002 Passive Resynchronizing
  14.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:- gw_sdw2 /data/mirror/gpseg3 41003 Passive Resynchronizing
  15.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:- gw_sdw1 /data/mirror/gpseg4 41000 Passive Resynchronizing
  16.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:- gw_sdw1 /data/mirror/gpseg5 41001 Passive Resynchronizing
  17.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:- gw_sdw1 /data/mirror/gpseg6 41002 Passive Resynchronizing
  18.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:- gw_sdw1 /data/mirror/gpseg7 41003 Passive Resynchronizing
  19.  
    20190326:01:09:51:031359 gpstate:gw_mdw1:gpadmin-[INFO]:--------------------------------------------------------------

查看节点状态

发现所有的mirror已经启动

  1.  
    postgres=# SELECT * from gp_segment_configuration ;
  2.  
    dbid | content | role | preferred_role | mode | status | port | hostname | address | replication_port | san_mounts
  3.  
    ------+---------+------+----------------+------+--------+-------+----------+---------+------------------+------------
  4.  
    1 | -1 | p | p | s | u | 5432 | gw_mdw1 | gw_mdw1 | |
  5.  
    2 | 0 | p | p | s | u | 40000 | gw_sdw1 | gw_sdw1 | 43000 |
  6.  
    10 | 0 | m | m | s | u | 41000 | gw_sdw2 | gw_sdw2 | 42000 |
  7.  
    3 | 1 | p | p | s | u | 40001 | gw_sdw1 | gw_sdw1 | 43001 |
  8.  
    11 | 1 | m | m | s | u | 41001 | gw_sdw2 | gw_sdw2 | 42001 |
  9.  
    4 | 2 | p | p | s | u | 40002 | gw_sdw1 | gw_sdw1 | 43002 |
  10.  
    12 | 2 | m | m | s | u | 41002 | gw_sdw2 | gw_sdw2 | 42002 |
  11.  
    5 | 3 | p | p | s | u | 40003 | gw_sdw1 | gw_sdw1 | 43003 |
  12.  
    13 | 3 | m | m | s | u | 41003 | gw_sdw2 | gw_sdw2 | 42003 |
  13.  
    6 | 4 | p | p | s | u | 40000 | gw_sdw2 | gw_sdw2 | 43000 |
  14.  
    14 | 4 | m | m | s | u | 41000 | gw_sdw1 | gw_sdw1 | 42000 |
  15.  
    7 | 5 | p | p | s | u | 40001 | gw_sdw2 | gw_sdw2 | 43001 |
  16.  
    15 | 5 | m | m | s | u | 41001 | gw_sdw1 | gw_sdw1 | 42001 |
  17.  
    8 | 6 | p | p | s | u | 40002 | gw_sdw2 | gw_sdw2 | 43002 |
  18.  
    16 | 6 | m | m | s | u | 41002 | gw_sdw1 | gw_sdw1 | 42002 |
  19.  
    9 | 7 | p | p | s | u | 40003 | gw_sdw2 | gw_sdw2 | 43003 |
  20.  
    17 | 7 | m | m | s | u | 41003 | gw_sdw1 | gw_sdw1 | 42003 |
  21.  
    (17 rows)

Greenplum 添加mirror步骤

标签:报错   完成   步骤   pst   min   lan   reg   系统   markdown   

原文地址:https://www.cnblogs.com/xibuhaohao/p/11327217.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!