标签：physical command display minimum change
WARNING: DOS-compatible mode is deprecated. It‘s strongly recommended to
switch off the mode (command ‘c‘) and change display units to
sectors (command ‘u‘).
Disk /dev/sdb: 7918 MB, 7918460928 bytes
244 heads, 62 sectors/track, 1022 cylinders
Units = cylinders of 15128 * 512 = 7745536 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x6bc79fdf
Device Boot Start End Blocks Id System
/dev/sdb1 1 140 1051648 82 Linux swap / Solaris
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(0, 32, 33) logical=(0, 33, 3)
Partition 1 has different physical/logical endings:
phys=(131, 13, 10) logical=(139, 41, 10)
Partition 1 does not end on cylinder boundary.
/dev/sdb2 * 140 1023 6679552 83 Linux
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(131, 13, 11) logical=(139, 41, 11)
Partition 2 has different physical/logical endings:
phys=(962, 157, 27) logical=(1022, 58, 36)
Partition 2 does not end on cylinder boundary.
标签：physical command display minimum change
原文地址：http://5228690.blog.51cto.com/5218690/1568747
