标签：cte   ret   and   源码分析   err   over   values   通知   连接   

ClientWatchManager

public Set<Watcher> materialize(Watcher.Event.KeeperState state,
        Watcher.Event.EventType type, String path);

该接口，只有一个方法，需要实现。该方法表示事件发生时，返回需要被通知的Watcher集合，可能为空集合。

ZKWatchManager

1、ZKWatchManager是ZooKeeper的内部类，实现了ClientWatchManager。
2、ZKWatchManager定义了三个Map键值对，键为节点路径，值为Watcher。分别对应数据变化的Watcher、节点是否存在的Watcher、子节点变化的Watcher。

static class ZKWatchManager implements ClientWatchManager {
        //数据变化的watchers
        private final Map<String, Set<Watcher>> dataWatches =
            new HashMap<String, Set<Watcher>>();
        //节点存在与否的watchers
        private final Map<String, Set<Watcher>> existWatches =
            new HashMap<String, Set<Watcher>>();
        //子节点变化的watchers
        private final Map<String, Set<Watcher>> childWatches =
            new HashMap<String, Set<Watcher>>();

3、materialize方法

该方法在事件发生后，返回需要被通知的Watcher集合。在该方法中，首先会根据EventType类型确定相应的事件类型，然后根据事件类型的不同做出相应的操作，如针对None类型，即无任何事件，则首先会从三个键值对中删除clientPath对应的Watcher，然后将剩余的Watcher集合添加至结果集合；针对NodeDataChanged和NodeCreated事件而言，其会从dataWatches和existWatches中删除clientPath对应的Watcher，然后将剩余的Watcher集合添加至结果集合。

@Override
        public Set<Watcher> materialize(Watcher.Event.KeeperState state,
                                        Watcher.Event.EventType type,
                                        String clientPath)
        {
            //返回结果集合
            Set<Watcher> result = new HashSet<Watcher>();

            switch (type) {//事件类型
            case None://无类型
                //添加默认watcher
                result.add(defaultWatcher);
                //根据disableAutoWatchReset和Zookeeper的状态是否为同步连接判断是否需要清空
                boolean clear = disableAutoWatchReset && state != Watcher.Event.KeeperState.SyncConnected;
                //针对3个不同的watcherMap进行操作
                synchronized(dataWatches) {
                    for(Set<Watcher> ws: dataWatches.values()) {
                        // 添加至结果集合
                        result.addAll(ws);
                    }
                    if (clear) { // 是否需要清空
                        dataWatches.clear();
                    }
                }

                synchronized(existWatches) {
                    for(Set<Watcher> ws: existWatches.values()) {
                        result.addAll(ws);
                    }
                    if (clear) {
                        existWatches.clear();
                    }
                }

                synchronized(childWatches) {
                    for(Set<Watcher> ws: childWatches.values()) {
                        result.addAll(ws);
                    }
                    if (clear) {
                        childWatches.clear();
                    }
                }

                return result;
            case NodeDataChanged:// 节点数据变化
            case NodeCreated:// 创建节点
                synchronized (dataWatches) {
                    //移除clientPath对应的Watcher后全部添加至结果集合
                    addTo(dataWatches.remove(clientPath), result);
                }
                synchronized (existWatches) {
                    //移除clientPath对应的Watcher后全部添加至结果集合
                    addTo(existWatches.remove(clientPath), result);
                }
                break;
            case NodeChildrenChanged: // 节点子节点变化
                synchronized (childWatches) {
                    // 移除clientPath对应的Watcher后全部添加至结果集合
                    addTo(childWatches.remove(clientPath), result);
                }
                break;
            case NodeDeleted:// 删除节点
                synchronized (dataWatches) {
                    // 移除clientPath对应的Watcher后全部添加至结果集合
                    addTo(dataWatches.remove(clientPath), result);
                }
                // XXX This shouldn‘t be needed, but just in case
                synchronized (existWatches) {
                    Set<Watcher> list = existWatches.remove(clientPath);
                    if (list != null) {
                        addTo(list, result);
                        LOG.warn("We are triggering an exists watch for delete! Shouldn‘t happen!");
                    }
                }
                synchronized (childWatches) {
                    //移除clientPath对应的Watcher后全部添加至结果集合
                    addTo(childWatches.remove(clientPath), result);
                }
                break;
            default:
                String msg = "Unhandled watch event type " + type
                    + " with state " + state + " on path " + clientPath;
                LOG.error(msg);
                throw new RuntimeException(msg);
            }

            return result;
        }
    }

zookeeper（9）源码分析-事件监听Watcher（2）

标签：cte   ret   and   源码分析   err   over   values   通知   连接   

原文地址：https://blog.51cto.com/janephp/2455948