码迷,mamicode.com
首页 > 其他好文 > 详细

单域MPLS 虚拟私有网络的整个详解配置过程(可跟做)

时间:2019-12-09 01:14:07      阅读:86      评论:0      收藏:0      [点我收藏+]

标签:就是   include   move   state   img   mit   packet   建立   moved   

技术图片

1.PE1和P和PE2之间跑IGP协议

运营商里面首选的还是ISIS协议
我们实验的话,用的是OSPF协议

R3的IP地址和OSPF配置

[R3]display ip int brief                        
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 5
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 5
The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              13.1.1.3/24          up         up        
GigabitEthernet0/0/1              23.1.1.3/24          up         up        
GigabitEthernet1/0/0              34.1.1.3/24          up         up        
GigabitEthernet2/0/0              unassigned           down       down      
LoopBack0                         3.3.3.3/32           up         up(s)     
NULL0                             unassigned           up         up(s)     

[R3]dis current-configuration configuration ospf
[V200R003C00]
#
ospf 1 router-id 3.3.3.3 
 area 0.0.0.0 
  network 3.3.3.3 0.0.0.0 
  network 34.1.1.0 0.0.0.255 
#
return
[R3]

R4的IP地址和OSPF配置

[R4]display ip int brief                            
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 4
The number of interface that is DOWN in Physical is 0
The number of interface that is UP in Protocol is 4
The number of interface that is DOWN in Protocol is 0

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              34.1.1.4/24          up         up        
GigabitEthernet0/0/1              45.1.1.4/24          up         up        
LoopBack0                         4.4.4.4/32           up         up(s)     
NULL0                             unassigned           up         up(s)     

[R4]display current-configuration configuration ospf
[V200R003C00]
#
ospf 1 router-id 4.4.4.4 
 area 0.0.0.0 
  network 4.4.4.4 0.0.0.0 
  network 34.1.1.0 0.0.0.255 
  network 45.1.1.0 0.0.0.255 
#
return

R5的IP地址和OSPF的配置

<R5>display ip int brief                            
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 5
The number of interface that is DOWN in Physical is 0
The number of interface that is UP in Protocol is 5
The number of interface that is DOWN in Protocol is 0

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              45.1.1.5/24          up         up        
GigabitEthernet0/0/1              56.1.1.5/24          up         up        
GigabitEthernet1/0/0              57.1.1.5/24          up         up        
LoopBack0                         5.5.5.5/32           up         up(s)     
NULL0                             unassigned           up         up(s)     

<R5>display current-configuration configuration ospf
[V200R003C00]
#
ospf 1 router-id 5.5.5.5 
 area 0.0.0.0 
  network 5.5.5.5 0.0.0.0 
  network 45.1.1.0 0.0.0.255 
#
return

2.检查结果

在R4上面检查我们的结果

[R4]display ospf peer brief               

         OSPF Process 1 with Router ID 4.4.4.4
                  Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 0.0.0.0          GigabitEthernet0/0/0             3.3.3.3          Full        
 0.0.0.0          GigabitEthernet0/0/1             5.5.5.5          Full        
 ----------------------------------------------------------------------------

在R4上面检查是否通过OSPF学习到R3和R5network发布的路由

[R4]display ip routing-table protocol ospf
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Public routing table : OSPF
         Destinations : 2        Routes : 2        

OSPF routing table status : <Active>
         Destinations : 2        Routes : 2

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        3.3.3.3/32  OSPF    10   1           D   34.1.1.3        GigabitEthernet0/0/0
        5.5.5.5/32  OSPF    10   1           D   45.1.1.5        GigabitEthernet0/0/1

OSPF routing table status : <Inactive>
         Destinations : 0        Routes : 0

3.PE1和P和PE2之间跑MPLS协议和MPLS LDP协议

原因就是解决BGP跨设备路由黑洞问题

R3的MPLS和MPLS LDP的配置

全局下的配置

#
mpls lsr-id 3.3.3.3
mpls
mpls ldp
#
接口下的配置
#
interface GigabitEthernet1/0/0
 mpls
 mpls ldp
#

R4的MPLS和MPLS LDP的配置

全局下的配置

#
mpls lsr-id 4.4.4.4
mpls
mpls ldp
#
接口下的配置
#
interface GigabitEthernet0/0/0
 mpls
 mpls ldp
#
interface GigabitEthernet0/0/1
 mpls
 mpls ldp
#

R5的MPLS和MPLS LDP的配置

全局下的配置

#
mpls lsr-id 5.5.5.5
mpls
mpls ldp
#
接口下的配置
#
interface GigabitEthernet0/0/0
 mpls
 mpls ldp
#

4.检查MPLS LDP关系

在R4上面查看于R3和R5之间的LDP关系

[R4]display mpls ldp session all 

 LDP Session(s) in Public Network
 Codes: LAM(Label Advertisement Mode), SsnAge Unit(DDDD:HH:MM)
 A ‘*‘ before a session means the session is being deleted.
 ------------------------------------------------------------------------------
 PeerID             Status      LAM  SsnRole  SsnAge      KASent/Rcv
 ------------------------------------------------------------------------------
 3.3.3.3:0          Operational DU   Active   0000:00:36  148/148
 5.5.5.5:0          Operational DU   Passive  0000:00:36  147/147
 ------------------------------------------------------------------------------
 TOTAL: 2 session(s) Found.

在R5上面分别查看是否对3.3.3.3/32分发标签

<R5>display mpls lsp include 3.3.3.3 32 
-------------------------------------------------------------------------------
                 LSP Information: LDP LSP
-------------------------------------------------------------------------------
FEC                In/Out Label  In/Out IF                      Vrf Name       
3.3.3.3/32         NULL/1024     -/GE0/0/0                                     
3.3.3.3/32         1024/1024     -/GE0/0/0         

<R4>display mpls lsp include 3.3.3.3 32
-------------------------------------------------------------------------------
                 LSP Information: LDP LSP
-------------------------------------------------------------------------------
FEC                In/Out Label  In/Out IF                      Vrf Name       
3.3.3.3/32         NULL/3        -/GE0/0/0                                     
3.3.3.3/32         1024/3        -/GE0/0/0             

<R3>display mpls lsp include 3.3.3.3 32
-------------------------------------------------------------------------------
                 LSP Information: LDP LSP
-------------------------------------------------------------------------------
FEC                In/Out Label  In/Out IF                      Vrf Name       
3.3.3.3/32         3/NULL        -/-     

在R3上面分别查看是否对5.5.5.5/32分发标签

<R3>display mpls lsp include 5.5.5.5 32
-------------------------------------------------------------------------------
                 LSP Information: LDP LSP
-------------------------------------------------------------------------------
FEC                In/Out Label  In/Out IF                      Vrf Name       
5.5.5.5/32         NULL/1025     -/GE1/0/0                                     
5.5.5.5/32         1025/1025     -/GE1/0/0      

<R4>display mpls lsp include 5.5.5.5 32
-------------------------------------------------------------------------------
                 LSP Information: LDP LSP
-------------------------------------------------------------------------------
FEC                In/Out Label  In/Out IF                      Vrf Name       
5.5.5.5/32         NULL/3        -/GE0/0/1                                     
5.5.5.5/32         1025/3        -/GE0/0/1      

<R5>display mpls lsp include 5.5.5.5 32
-------------------------------------------------------------------------------
                 LSP Information: LDP LSP
-------------------------------------------------------------------------------
FEC                In/Out Label  In/Out IF                      Vrf Name       
5.5.5.5/32         3/NULL        -/-      

5.在PE1和PE2上面分别配置VRF和RD和RT

在PE1和PE2上面分别对A公司的分部和总部进行定义VRF

PE1上面定义A公司分部

#
ip ***-instance ***13
 ipv4-family
  route-distinguisher 1:3
  ***-target 100:300 export-extcommunity
  ***-target 100:300 import-extcommunity
# 

PE2上面定义A公司总部

#
ip ***-instance ***75
 ipv4-family
  route-distinguisher 7:5
  ***-target 100:300 export-extcommunity
  ***-target 100:300 import-extcommunity
#

在PE1和PE2上面分别对A公司的分部和总部进行定义VRF调用

PE1上面定义A公司分部VRF的调用

#
interface GigabitEthernet0/0/0
 ip binding ***-instance ***13
 ip address 13.1.1.3 255.255.255.0 
#
注意:调用VRF的时候,该接口下的配置就会消失
 #
interface GigabitEthernet0/0/0
 ip address 13.1.1.3 255.255.255.0 
#
[R3-GigabitEthernet0/0/0]ip binding ***-instance ***13
Nov  2 2019 14:59:50-08:00 R3 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the DOWN state. 
Info: All IPv4 related configurations on this interface are removed!
Info: All IPv6 related configurations on this interface are removed!
[R3-GigabitEthernet0/0/0]dis this
[V200R003C00]
#
interface GigabitEthernet0/0/0
 ip binding ***-instance ***13
#
[R3-GigabitEthernet0/0/0]ip address  13.1.1.3 24
Nov  2 2019 15:00:02-08:00 R3 %%01IFNET/4/LINK_STATE(l)[4]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R3-GigabitEthernet0/0/0]   

怎么样查看VRF的路由呢?

[R3]display ip routing-table ***-instance ***13 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: ***13
         Destinations : 6        Routes : 6        

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

       13.1.1.0/24  Direct  0    0           D   13.1.1.3        GigabitEthernet0/0/0
       13.1.1.3/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
     13.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[R3]    

在PE1上面的全局路由表里面根本就看不到13网段的任何路由

[R3]display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 11       Routes : 11       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        3.3.3.3/32  Direct  0    0           D   127.0.0.1       LoopBack0
        4.4.4.4/32  OSPF    10   1           D   34.1.1.4        GigabitEthernet1/0/0
        5.5.5.5/32  OSPF    10   2           D   34.1.1.4        GigabitEthernet1/0/0
       34.1.1.0/24  Direct  0    0           D   34.1.1.3        GigabitEthernet1/0/0
       34.1.1.3/32  Direct  0    0           D   127.0.0.1       GigabitEthernet1/0/0
     34.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet1/0/0
       45.1.1.0/24  OSPF    10   2           D   34.1.1.4        GigabitEthernet1/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[R3]  

PE2上面定义A公司总部VRF的调用

#
interface GigabitEthernet1/0/0
 ip binding ***-instance ***75
 ip address 57.1.1.5 255.255.255.0 
#

[R5]display ip routing-table ***-instance ***75 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: ***75
         Destinations : 6        Routes : 6        

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

       57.1.1.0/24  Direct  0    0           D   57.1.1.5        GigabitEthernet1/0/0
       57.1.1.5/32  Direct  0    0           D   127.0.0.1       GigabitEthernet1/0/0
     57.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet1/0/0
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[R5]display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 11       Routes : 11       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        3.3.3.3/32  OSPF    10   2           D   45.1.1.4        GigabitEthernet0/0/0
        4.4.4.4/32  OSPF    10   1           D   45.1.1.4        GigabitEthernet0/0/0
        5.5.5.5/32  Direct  0    0           D   127.0.0.1       LoopBack0
       34.1.1.0/24  OSPF    10   2           D   45.1.1.4        GigabitEthernet0/0/0
       45.1.1.0/24  Direct  0    0           D   45.1.1.5        GigabitEthernet0/0/0
       45.1.1.5/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
     45.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0       

在PE1和PE2上面分别对B公司的分部和总部进行定义VRF

PE1上面定义B公司分部

#
ip ***-instance ***23
 ipv4-family
  route-distinguisher 2:3
  ***-target 200:400 export-extcommunity
  ***-target 200:400 import-extcommunity
#

PE2上面定义B公司总部

#
ip ***-instance ***65
 ipv4-family
  route-distinguisher 6:5
  ***-target 200:400 export-extcommunity
  ***-target 200:400 import-extcommunity
#

在PE1和PE2上面分别对B公司的分部和总部进行定义VRF调用

PE1上面定义B公司分部VRF的调用

#
interface GigabitEthernet0/0/1
 ip binding ***-instance ***23
 ip address 23.1.1.3 255.255.255.0 
#

PE2上面定义B公司总部VRF的调用

#
interface GigabitEthernet0/0/1
 ip binding ***-instance ***65
 ip address 56.1.1.5 255.255.255.0 
#

总结:此时PE1和PE2上面有三张表

一个是FIB表(全局路由表)
一个是***13表
一个是***23表
三张表之间的关系相互独立,互不影响

6.CE1和PE1之间的路由协议

注意:CE和PE之间可以启用静态、RIP、OSPF、ISIS、BGP协议
但是推荐启用BGP协议

CE1的BGP的配置

#
bgp 100
 peer 13.1.1.3 as-number 500 
 #
 ipv4-family unicast
  undo synchronization
  network 1.1.1.1 255.255.255.255 
  peer 13.1.1.3 enable
#

PE1的BGP的配置

[R3-bgp]ipv4-family ?
  multicast     Specify multicast address family
  unicast       Specify unicast address family    默认情况你的BGP都在单播里面
  ***-instance  Specify *** instance    但是你要进入这个***-INSTANCE视图里面去
  ***v4         Specify ***v4 address family
[R3-bgp]ipv4-family ***-instance ***13
[R3-bgp-***13]dis this
[V200R003C00]
#
 #
 ipv4-family ***-instance ***13 
  peer 13.1.1.1 as-number 100 
#

在PE1查看BGP ***-instance的关系

[R3]display bgp ***v4 ***-instance ***13 peer 

 BGP local router ID : 3.3.3.3
 Local AS number : 500

 ***-Instance ***13, Router ID 3.3.3.3:
 Total number of peers : 1                Peers in established state : 1

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State PrefRcv

  13.1.1.1        4         100       20       20     0 00:17:56 Established       1

[R1]display bgp peer 

 BGP local router ID : 13.1.1.1
 Local AS number : 100
 Total number of peers : 1                Peers in established state : 1

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State PrefRcv

  13.1.1.3        4         500       20       21     0 00:17:08 Established       1    

检查在PE1上面是否学习到关于CE1设备的1.1.1.1/32的路由

[R3]display bgp ***v4 ***-instance ***13 routing-table 

 BGP Local router ID is 3.3.3.3 
 Status codes: * - valid, > - best, d - damped,
               h - history,  i - internal, s - suppressed, S - Stale
               Origin : i - IGP, e - EGP, ? - incomplete

 ***-Instance ***13, Router ID 3.3.3.3:

 Total Number of Routes: 2
      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   1.1.1.1/32         13.1.1.1        0                     0      100i

剩下的CE2和PE2之间的BGP

R7的BGP配置

#
bgp 300
 peer 57.1.1.5 as-number 500 
 #
 ipv4-family unicast
  undo synchronization
  network 7.7.7.7 255.255.255.255 
  peer 57.1.1.5 enable
#

PE2BGP的配置

[R5]bgp 500
[R5-bgp]ipv4-family ***-instance ***75
[R5-bgp-***75]DIS THIS
[V200R003C00]
#
 ipv4-family ***-instance ***75 
  peer 57.1.1.7 as-number 300 
#

在R7上面进行检查

[R7]display bgp peer 

 BGP local router ID : 57.1.1.7
 Local AS number : 300
 Total number of peers : 1                Peers in established state : 1

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State PrefRcv

  57.1.1.5        4         500       90       88     0 01:25:01 Established       1
[R7]

在PE2上面进行检查

[R5-bgp]display bgp ***v4 ***-instance ***75 peer 

 BGP local router ID : 45.1.1.5
 Local AS number : 500

 ***-Instance ***75, Router ID 45.1.1.5:
 Total number of peers : 1                Peers in established state : 1

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State PrefRcv

  57.1.1.7        4         300       88       91     0 01:25:13 Established       1

[R5-bgp]display bgp ***v4 ***-instance ***75 routing-table 

 BGP Local router ID is 45.1.1.5 
 Status codes: * - valid, > - best, d - damped,
               h - history,  i - internal, s - suppressed, S - Stale
               Origin : i - IGP, e - EGP, ? - incomplete

 ***-Instance ***75, Router ID 45.1.1.5:

 Total Number of Routes: 2
      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

*>   7.7.7.7/32         57.1.1.7        0                     0      300i
[R5-bgp]

剩下的CE3和PE1之间的BGP

#
bgp 200
 peer 23.1.1.3 as-number 500 
 #
 ipv4-family unicast
  undo synchronization
  network 2.2.2.2 255.255.255.255 
  peer 23.1.1.3 enable
#
return
[R2-bgp]

[R3]bgp 500
[R3-bgp]ip
[R3-bgp]ipv4-family ***
[R3-bgp]ipv4-family ***v4
[R3-bgp]ipv4-family ***-instance ***23
[R3-bgp-***23]
[R3-bgp-***23]
[R3-bgp-***23]dis this
[V200R003C00]
#
 #
 ipv4-family ***-instance ***23 
  peer 23.1.1.2 as-number 200 
#
return
[R3-bgp-***23]

[R2]display bgp peer 

 BGP local router ID : 23.1.1.2
 Local AS number : 200
 Total number of peers : 1                Peers in established state : 1

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State PrefRcv

  23.1.1.3        4         500       91       91     0 01:28:11 Established       1

[R3-bgp]display bgp ***v4 ***-instance ***23 peer 

 BGP local router ID : 3.3.3.3
 Local AS number : 500

 ***-Instance ***23, Router ID 3.3.3.3:
 Total number of peers : 1                Peers in established state : 1

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State PrefRcv

  23.1.1.2        4         200       91       92     0 01:28:28 Established       1
[R3-bgp]display bgp ***v4 ***-instance ***23 rou 
[R3-bgp]display bgp ***v4 ***-instance ***23 routing-table 

 BGP Local router ID is 3.3.3.3 
 Status codes: * - valid, > - best, d - damped,
               h - history,  i - internal, s - suppressed, S - Stale
               Origin : i - IGP, e - EGP, ? - incomplete

 ***-Instance ***23, Router ID 3.3.3.3:

 Total Number of Routes: 2
      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   2.2.2.2/32         23.1.1.2        0                     0      200i
 *>i  6.6.6.6/32         5.5.5.5         0          100        0      400i

剩下的CE4和PE2之间的BGP

bgp 400
 peer 56.1.1.5 as-number 500 
 #
 ipv4-family unicast
  undo synchronization
  network 6.6.6.6 255.255.255.255 
  peer 56.1.1.5 enable
#

[R5-bgp]
[R5-bgp]bgp 500
[R5-bgp]ip
[R5-bgp]ipv6-family
[R5-bgp]ipv4-family ***
[R5-bgp]ipv4-family ***v4
[R5-bgp]ipv4-family ***-instance ***
[R5-bgp]ipv4-family ***-instance ***65
[R5-bgp-***65]dis this
[V200R003C00]
#
 #
 ipv4-family ***-instance ***65 
  peer 56.1.1.6 as-number 400 
#
return
[R5-bgp-***65]

[R6]display bgp peer 

 BGP local router ID : 56.1.1.6
 Local AS number : 400
 Total number of peers : 1                Peers in established state : 1

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State PrefRcv

  56.1.1.5        4         500       93       94     0 01:30:21 Established       1

[R5-bgp]display bgp ***v4 ***-instance ***65 peer 

 BGP local router ID : 45.1.1.5
 Local AS number : 500

 ***-Instance ***65, Router ID 45.1.1.5:
 Total number of peers : 1                Peers in established state : 1

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State PrefRcv

  56.1.1.6        4         400       93       93     0 01:30:35 Established       1
[R5-bgp]display bgp ***v4 ***-instance ***65 rou 
[R5-bgp]display bgp ***v4 ***-instance ***65 routing-table 

 BGP Local router ID is 45.1.1.5 
 Status codes: * - valid, > - best, d - damped,
               h - history,  i - internal, s - suppressed, S - Stale
               Origin : i - IGP, e - EGP, ? - incomplete

 ***-Instance ***65, Router ID 45.1.1.5:

 Total Number of Routes: 2
      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>i  2.2.2.2/32         3.3.3.3         0          100        0      200i
 *>   6.6.6.6/32         56.1.1.6        0                     0      400i           

7.PE1和PE2之间建立MP-BGP的关系

在PE1上面的配置

7.PE1和PE2之间建立MP-BGP的关系
在PE1上面的配置
bgp 500
 undo default ipv4-unicast
 peer 5.5.5.5 as-number 500 
 peer 5.5.5.5 connect-interface LoopBack0
 #
 ipv4-family unicast
  undo synchronization
  peer 5.5.5.5 enable
  peer 5.5.5.5 next-hop-local 
 # 
 ipv4-family ***v4
  policy ***-target
  peer 5.5.5.5 enable       因为PE设备之间的路由是***V4的路由
# 
在PE2上面的配置
bgp 500
 peer 3.3.3.3 as-number 500 
 peer 3.3.3.3 connect-interface LoopBack0
 #
 ipv4-family unicast
  undo synchronization
  peer 3.3.3.3 enable
  peer 3.3.3.3 next-hop-local 
 # 
 ipv4-family ***v4
  policy ***-target
  peer 3.3.3.3 enable
 #
检查MP-BGP的关系
[R3]display bgp ***v4 all peer 

 BGP local router ID : 3.3.3.3
 Local AS number : 500
 Total number of peers : 3                Peers in established state : 3

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State PrefRcv

  5.5.5.5         4         500       98      101     0 01:34:50 Established       2

  Peer of IPv4-family for *** instance :

 ***-Instance ***13, Router ID 3.3.3.3:
  13.1.1.1        4         100       36       36     0 00:33:30 Established       1

 ***-Instance ***23, Router ID 3.3.3.3:
  23.1.1.2        4         200       98       99     0 01:35:22 Established       1

[R5]display bgp ***v4 all peer 

 BGP local router ID : 45.1.1.5
 Local AS number : 500
 Total number of peers : 3                Peers in established state : 3

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State PrefRcv

  3.3.3.3         4         500      104      102     0 01:38:29 Established       2

  Peer of IPv4-family for *** instance :

 ***-Instance ***65, Router ID 45.1.1.5:
  56.1.1.6        4         400      102      102     0 01:39:01 Established       1

 ***-Instance ***75, Router ID 45.1.1.5:
  57.1.1.7        4         300      101      104     0 01:38:40 Established       1       
在R3上面查看我们***V4的路由表   R3上面都会学习到各个站点的VRF的***V4路由,但是R3这边他会根据各个VRF路由里面所携带的RD和RT参数,R3就是把各自的路由放入到各自的***-Instance当中
[R3]display bgp ***v4 all  routing-table 

 BGP Local router ID is 3.3.3.3 
 Status codes: * - valid, > - best, d - damped,
               h - history,  i - internal, s - suppressed, S - Stale
               Origin : i - IGP, e - EGP, ? - incomplete

 Total number of routes from all PE: 4
 Route Distinguisher: 1:3 

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   1.1.1.1/32         13.1.1.1        0                     0      100i

 Route Distinguisher: 2:3 

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   2.2.2.2/32         23.1.1.2        0                     0      200i

 Route Distinguisher: 6:5 

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>i  6.6.6.6/32         5.5.5.5         0          100        0      400i

 Route Distinguisher: 7:5 

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>i  7.7.7.7/32         5.5.5.5         0          100        0      300i

 ***-Instance ***13, Router ID 3.3.3.3:

 Total Number of Routes: 2
      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   1.1.1.1/32         13.1.1.1        0                     0      100i
 *>i  7.7.7.7/32         5.5.5.5         0          100        0      300i

 ***-Instance ***23, Router ID 3.3.3.3:

 Total Number of Routes: 2
      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   2.2.2.2/32         23.1.1.2        0                     0      200i
 *>i  6.6.6.6/32         5.5.5.5         0          100        0      400i      

8.在各个站点进行测试
<R1>display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 9        Routes : 9        

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        1.1.1.1/32  Direct  0    0           D   127.0.0.1       LoopBack0
        7.7.7.7/32  EBGP    255  0           D   13.1.1.3        GigabitEthernet0/0/0
       13.1.1.0/24  Direct  0    0           D   13.1.1.1        GigabitEthernet0/0/0
       13.1.1.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
     13.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

<R1>ping -a 1.1.1.1 7.7.7.7 
  PING 7.7.7.7: 56  data bytes, press CTRL_C to break
    Reply from 7.7.7.7: bytes=56 Sequence=1 ttl=252 time=40 ms
    Reply from 7.7.7.7: bytes=56 Sequence=2 ttl=252 time=40 ms
    Reply from 7.7.7.7: bytes=56 Sequence=3 ttl=252 time=70 ms
    Reply from 7.7.7.7: bytes=56 Sequence=4 ttl=252 time=40 ms
    Reply from 7.7.7.7: bytes=56 Sequence=5 ttl=252 time=30 ms

  --- 7.7.7.7 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 30/44/70 ms
其他连通性略        

在PE2上面的配置

bgp 500
 peer 3.3.3.3 as-number 500 
 peer 3.3.3.3 connect-interface LoopBack0
 #
 ipv4-family unicast
  undo synchronization
  peer 3.3.3.3 enable
  peer 3.3.3.3 next-hop-local 
 # 
 ipv4-family ***v4
  policy ***-target
  peer 3.3.3.3 enable
 #

检查MP-BGP的关系

<R1>display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 9        Routes : 9        

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        1.1.1.1/32  Direct  0    0           D   127.0.0.1       LoopBack0
        7.7.7.7/32  EBGP    255  0           D   13.1.1.3        GigabitEthernet0/0/0
       13.1.1.0/24  Direct  0    0           D   13.1.1.1        GigabitEthernet0/0/0
       13.1.1.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
     13.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

<R1>ping -a 1.1.1.1 7.7.7.7 
  PING 7.7.7.7: 56  data bytes, press CTRL_C to break
    Reply from 7.7.7.7: bytes=56 Sequence=1 ttl=252 time=40 ms
    Reply from 7.7.7.7: bytes=56 Sequence=2 ttl=252 time=40 ms
    Reply from 7.7.7.7: bytes=56 Sequence=3 ttl=252 time=70 ms
    Reply from 7.7.7.7: bytes=56 Sequence=4 ttl=252 time=40 ms
    Reply from 7.7.7.7: bytes=56 Sequence=5 ttl=252 time=30 ms

  --- 7.7.7.7 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 30/44/70 ms

在R3上面查看我们***V4的路由表 R3上面都会学习到各个站点的VRF的***V4路由,但是R3这边他会根据各个VRF路由里面所携带的RD和RT参数,R3就是把各自的路由放入到各自的***-Instance当中

[R3]display bgp ***v4 all  routing-table 

 BGP Local router ID is 3.3.3.3 
 Status codes: * - valid, > - best, d - damped,
               h - history,  i - internal, s - suppressed, S - Stale
               Origin : i - IGP, e - EGP, ? - incomplete

 Total number of routes from all PE: 4
 Route Distinguisher: 1:3 

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   1.1.1.1/32         13.1.1.1        0                     0      100i

 Route Distinguisher: 2:3 

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   2.2.2.2/32         23.1.1.2        0                     0      200i

 Route Distinguisher: 6:5 

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>i  6.6.6.6/32         5.5.5.5         0          100        0      400i

 Route Distinguisher: 7:5 

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>i  7.7.7.7/32         5.5.5.5         0          100        0      300i

 ***-Instance ***13, Router ID 3.3.3.3:

 Total Number of Routes: 2
      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   1.1.1.1/32         13.1.1.1        0                     0      100i
 *>i  7.7.7.7/32         5.5.5.5         0          100        0      300i

 ***-Instance ***23, Router ID 3.3.3.3:

 Total Number of Routes: 2
      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   2.2.2.2/32         23.1.1.2        0                     0      200i
 *>i  6.6.6.6/32         5.5.5.5         0          100        0      400i      

8.在各个站点进行测试

<R1>display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 9        Routes : 9        

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        1.1.1.1/32  Direct  0    0           D   127.0.0.1       LoopBack0
        7.7.7.7/32  EBGP    255  0           D   13.1.1.3        GigabitEthernet0/0/0
       13.1.1.0/24  Direct  0    0           D   13.1.1.1        GigabitEthernet0/0/0
       13.1.1.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
     13.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

<R1>ping -a 1.1.1.1 7.7.7.7 
  PING 7.7.7.7: 56  data bytes, press CTRL_C to break
    Reply from 7.7.7.7: bytes=56 Sequence=1 ttl=252 time=40 ms
    Reply from 7.7.7.7: bytes=56 Sequence=2 ttl=252 time=40 ms
    Reply from 7.7.7.7: bytes=56 Sequence=3 ttl=252 time=70 ms
    Reply from 7.7.7.7: bytes=56 Sequence=4 ttl=252 time=40 ms
    Reply from 7.7.7.7: bytes=56 Sequence=5 ttl=252 time=30 ms

  --- 7.7.7.7 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 30/44/70 ms

其他连通性略

单域MPLS 虚拟私有网络的整个详解配置过程(可跟做)

标签:就是   include   move   state   img   mit   packet   建立   moved   

原文地址:https://blog.51cto.com/13817711/2457023

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!