标签：route img 查看ip images ffd iso var 物理 orm
一、在生产环境中，我们k8s集群需要多master实现高可用，所以下面介绍如何通过kubeadm部署k8s高可用集群（建议生产环境master至少3个以上）
二、master部署：
1、三台maser节点上部署etcd集群
2、使用VIP进行kubeadm初始化master
注意：本次是通过物理服务器进行部署，如果使用阿里云服务器部署，由于阿里云服务器不支持VIP，可以通过SLB做负载均衡
三、环境准备；
| 节点主机： | IP地址 | 操作系统 | 虚拟IP（VIP） |
| test-k8s-master-1 | 172.18.178.236 | CentOS Linux release 7.7.1908 (Core) | 172.18.178.240 |
| test-k8s-master-2 | 172.18.178.237 | CentOS Linux release 7.7.1908 (Core) | |
| test-k8s-master-3 | 172.18.178.238 | CentOS Linux release 7.7.1908 (Core) | |
| test-k8s-node-01 | 172.18.178.239 | CentOS Linux release 7.7.1908 (Core) |
1.修改主机名并修改hosts文件（所有节点上面都要进操作）：
hostnamectl set-hostname test-k8s-master-1 hostnamectl set-hostname test-k8s-master-2 hostnamectl set-hostname test-k8s-master-3 hostnamectl set-hostname test-k8s-node-01
vim /etc/hosts
172.18.178.236 test-k8s-master-1 172.18.178.237 test-k8s-master-2 172.18.178.238 test-k8s-master-3 172.18.178.239 test-k8s-node-01
2、配置yum源、安装相关的依赖包以及相关主件、配置内核优化参数等，这里我使用一个脚本直接安装（所有节点上面都需要执行）
cat init.sh
#yum源 yum install -y yum-utils device-mapper-persistent-data lvm2 wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo wget http://mirrors.aliyun.com/repo/epel-7.repo -O /etc/yum.repos.d/epel.repo cat >>/etc/yum.repos.d/kubernetes.repo <<EOF [kubernetes] name=Kubernetes baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/ enabled=1 gpgcheck=1 repo_gpgcheck=1 gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg EOF #安装K8S组件 yum install -y kubelet kubeadm kubectl docker-ce systemctl restart docker && systemctl enable docker systemctl enable kubelet ## setenforce 0 sed -i ‘s/SELINUX=enforcing/SELINUX=disabled/g‘ /etc/selinux/config sed -i ‘s/SELINUX=permissive/SELINUX=disabled/g‘ /etc/selinux/config yum install -y epel-release vim screen bash-completion mtr lrzsz wget telnet zip unzip sysstat ntpdate libcurl openssl bridge-utils nethogs dos2unix iptables-services htop nfs-utils ceph-common git mysql service firewalld stop systemctl disable firewalld.service service iptables stop systemctl disable iptables.service service postfix stop systemctl disable postfix.service wget http://mirrors.aliyun.com/repo/epel-7.repo -O /etc/yum.repos.d/epel.repo note=‘#Ansible: nptdate-time‘ task=‘*/10 * * * * /usr/sbin/ntpdate -u ntp.sjtu.edu.cn &> /dev/null‘ echo "$(crontab -l)" | grep "^${note}$" &>/dev/null || echo -e "$(crontab -l)\n${note}" | crontab - echo "$(crontab -l)" | grep "^${task}$" &>/dev/null || echo -e "$(crontab -l)\n${task}" | crontab - echo ‘/etc/security/limits.conf 参数调优，需重启系统后生效‘ cp -rf /etc/security/limits.conf /etc/security/limits.conf.back cat > /etc/security/limits.conf << EOF * soft nofile 655350 * hard nofile 655350 * soft nproc unlimited * hard nproc unlimited * soft core unlimited * hard core unlimited root soft nofile 655350 root hard nofile 655350 root soft nproc unlimited root hard nproc unlimited root soft core unlimited root hard core unlimited EOF echo ‘/etc/sysctl.conf 文件调优‘ cp -rf /etc/sysctl.conf /etc/sysctl.conf.back cat > /etc/sysctl.conf << EOF vm.swappiness = 0 net.ipv4.neigh.default.gc_stale_time = 120 # see details in https://help.aliyun.com/knowledge_detail/39428.html net.ipv4.conf.all.rp_filter = 0 net.ipv4.conf.default.rp_filter = 0 net.ipv4.conf.default.arp_announce = 2 net.ipv4.conf.lo.arp_announce = 2 net.ipv4.conf.all.arp_announce = 2 # see details in https://help.aliyun.com/knowledge_detail/41334.html net.ipv4.tcp_max_tw_buckets = 5000 net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_max_syn_backlog = 1024 net.ipv4.tcp_synack_retries = 2 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.default.disable_ipv6 = 1 net.ipv6.conf.lo.disable_ipv6 = 1 kernel.sysrq = 1 kernel.pid_max=1000000 EOF sysctl -p
备注：将改脚本放置在每个节点服务器上，执行 sh init.sh 即可
3、加载ipvs模块：
cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash modprobe -- ip_vs modprobe -- ip_vs_rr modprobe -- ip_vs_wrr modprobe -- ip_vs_sh modprobe -- nf_conntrack_ipv4 EOF
chmod 755 /etc/sysconfig/modules/ipvs.modules
bash /etc/sysconfig/modules/ipvs.modules
查看ipvs模块加载情况
lsmod | grep -e ip_vs -e nf_conntrack_ipv4
4、高可用（反向代理配置）：（此操作在test-k8s-master-1上面操作，如果服务器资源充足也可以单独使用一台服务器做相关反向代理 备注：所有master节点上面都需要部署）
使用nginx(upstream)或者 HAproxy（这里使用Nginx+keepalived）
1.安装Nginx和keepalived：
yum -y install nginx keepalived systemctl start keepalived && systemctl enable keepalived systemctl start nginx && systemctl enable nginx
2.配置Nginx的upstream反代：
[root@test-k8s-master-1 ~]# cd /etc/nginx
mv nginx.conf nginx.conf.default
vim nginx.conf.default
user nginx;
worker_processes auto;
error_log /var/log/nginx/error.log;
pid /run/nginx.pid;
include /usr/share/nginx/modules/*.conf;
events {
worker_connections 1024;
}
stream {
log_format proxy ‘$remote_addr $remote_port - [$time_local] $status $protocol ‘
‘"$upstream_addr" "$upstream_bytes_sent" "$upstream_connect_time"‘ ;
access_log /var/log/nginx/nginx-proxy.log proxy;
upstream kubernetes_lb{
server 172.18.178.236:6443 weight=5 max_fails=3 fail_timeout=30s;
server 172.18.178.237:6443 weight=5 max_fails=3 fail_timeout=30s;
server 172.18.178.238:6443 weight=5 max_fails=3 fail_timeout=30s;
}
server {
listen 7443;
proxy_connect_timeout 30s;
proxy_timeout 30s;
proxy_pass kubernetes_lb;
}
}
检查Nginx配置文件语法是否正常，后重新加载Nginx
[root@test-k8s-master-1 nginx]# nginx -t nginx: the configuration file /etc/nginx/nginx.conf syntax is ok nginx: configuration file /etc/nginx/nginx.conf test is successful
[root@test-k8s-master-1 nginx]# nginx -s reload
3.keeplived配置：
[root@test-k8s-master-1 ~]# /etc/keepalived
mv keepalived.conf keepalived.conf.default
vim keepalived.conf
global_defs { notification_email { test@gmail.com } notification_email_from Alexandre.Cassen@firewall.loc smtp_server 127.0.0.1 smtp_connect_timeout 30 router_id LVS_1 } vrrp_instance VI_1 { state MASTER interface ens192 #网卡设备名称，根据自己网卡信息进行更改 lvs_sync_daemon_inteface ens192 virtual_router_id 88 advert_int 1 priority 110 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 172.18.178.240/24 # 这就就是虚拟IP地址 } }
重启keepalived：
systemctl restart keepalived
5、初始化节点：
kubeadm config print init-defaults > kubeadm-init.yaml
下载镜像：
kubeadm config images pull --config kubeadm-init.yaml
修改kubeadm-init.yaml：
[root@test-k8s-master-1 ~]# vim kubeadm-init.yaml apiVersion: kubeadm.k8s.io/v1beta2 bootstrapTokens: - groups: - system:bootstrappers:kubeadm:default-node-token token: abcdef.0123456789abcdef ttl: 24h0m0s usages: - signing - authentication kind: InitConfiguration localAPIEndpoint: advertiseAddress: 172.18.178.237 bindPort: 6443 nodeRegistration: criSocket: /var/run/dockershim.sock name: test-k8s-master-1 taints: - effect: NoSchedule key: node-role.kubernetes.io/master --- apiServer: timeoutForControlPlane: 4m0s apiVersion: kubeadm.k8s.io/v1beta2 certificatesDir: /etc/kubernetes/pki clusterName: kubernetes controllerManager: {} controlPlaneEndpoint: "172.18.178.240:7443" dns: type: CoreDNS etcd: local: dataDir: /var/lib/etcd imageRepository: k8s.gcr.io kind: ClusterConfiguration kubernetesVersion: v1.16.3 networking: dnsDomain: cluster.local podSubnet: "10.244.0.0/16" scheduler: {} --- apiVersion: kubeproxy.config.k8s.io/v1alpha1 kind: KubeProxyConfiguration mode: "ipvs"
初始化：
[root@test-k8s-master-1 ~]# kubeadm init --config kubeadm-init.yaml ...................... [bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials [bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token [bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster [bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace [addons] Applied essential addon: CoreDNS [endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address [addons] Applied essential addon: kube-proxy Your Kubernetes control-plane has initialized successfully! To start using your cluster, you need to run the following as a regular user: mkdir -p $HOME/.kube sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config sudo chown $(id -u):$(id -g) $HOME/.kube/config You should now deploy a pod network to the cluster. Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at: https://kubernetes.io/docs/concepts/cluster-administration/addons/ You can now join any number of control-plane nodes by copying certificate authorities and service account keys on each node and then running the following as root: kubeadm join 172.18.178.240:7443 --token abcdef.0123456789abcdef --discovery-token-ca-cert-hash sha256:274a3c078548240887903b51e75e2cc9548343e06dcd2a3ca0c3087c3fdd3175 --control-plane Then you can join any number of worker nodes by running the following on each as root: kubeadm join 172.18.178.240:7443 --token abcdef.0123456789abcdef --discovery-token-ca-cert-hash sha256:274a3c078548240887903b51e75e2cc9548343e06dcd2a3ca0c3087c3fdd3175
6、其他两个master 复制相关配置
USER=root CONTROL_PLANE_IPS="test-k8s-master-2 test-k8s-master-3" for host in ${CONTROL_PLANE_IPS}; do ssh "${USER}"@$host "mkdir -p /etc/kubernetes/pki/etcd" scp /etc/kubernetes/pki/ca.* "${USER}"@$host:/etc/kubernetes/pki/ scp /etc/kubernetes/pki/sa.* "${USER}"@$host:/etc/kubernetes/pki/ scp /etc/kubernetes/pki/front-proxy-ca.* "${USER}"@$host:/etc/kubernetes/pki/ scp /etc/kubernetes/pki/etcd/ca.* "${USER}"@$host:/etc/kubernetes/pki/etcd/ scp /etc/kubernetes/admin.conf "${USER}"@$host:/etc/kubernetes/ done
7、master节点加入：
kubeadm join 172.18.178.240:7443 --token abcdef.0123456789abcdef --discovery-token-ca-cert-hash sha256:274a3c078548240887903b51e75e2cc9548343e06dcd2a3ca0c3087c3fdd3175 --control-plane
8、node 节点加入：
kubeadm join 172.18.178.240:7443 --token abcdef.0123456789abcdef --discovery-token-ca-cert-hash sha256:274a3c078548240887903b51e75e2cc9548343e06dcd2a3ca0c3087c3fdd3175
9、安装网络插件：
wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml kubectl apply -f kube-flannel.yml
10、相关master节点和node节点加入完成后，查看相关节点状态（以下情况说明部署成功）
[root@test-k8s-master-1 ~]# kubectl get node -A | grep master test-k8s-master-1 Ready master 233d v1.16.3 test-k8s-master-2 Ready master 233d v1.16.3 test-k8s-master-3 Ready master 233d v1.16.3
标签：route img 查看ip images ffd iso var 物理 orm
原文地址：https://www.cnblogs.com/abner123/p/13324014.html
