码迷,mamicode.com
首页 > 其他好文 > 详细

学习Qt Charts - Qt Charts的坐标轴

时间:2021-05-24 03:59:29      阅读:0      评论:0      收藏:0      [点我收藏+]

标签:中国天气   range   dai   工程   信息   qwidget   深圳   code   天气   

这次来学学Qt chart 的坐标轴

有这么一组数据:

技术图片

这是深圳市2019年6月份的天气预报(来自中国天气网:深圳),里面有每天的最高温度,把这最高温度做成个数组,如下:

int daily_temp_max[30] = [32,
        31,30,30,31,32,32,32,
        32,32,32,31,31,31,31,
        30,30,31,32,32,33,33,
        30,30,30,30,31,31,31,
        33];

按照之前的笔记,建立一个可以用Qt Chart的工程,并把上面的数据用折线图显示出来,代码如下:

Dialog::Dialog(QWidget *parent) :
    QDialog(parent),
    ui(new Ui::Dialog)
{
    ui->setupUi(this);

    int daily_temp_max[30] = {32,
            31,30,30,31,32,32,32,
            32,32,32,31,31,31,31,
            30,30,31,32,32,33,33,
            30,30,30,30,31,31,31,
            33};

    QLineSeries* temp_max_series = new QLineSeries();

    for(int i=0;i<30;i++)
        temp_max_series->append(i,daily_temp_max[i]);

    chart = new QChart();
    chart->addSeries(temp_max_series);

    ChartView = new QChartView(this);
    ChartView->setChart(chart);
    ui->containfer->addWidget(ChartView);
}

显示结果为:

技术图片

上图中只能看想到一条折线,此外看不出任何信息,不知道这个图标表示的是什么数据,数据范围是什么,

现在来给图表加上坐标轴,让图表表示的数据有意义

1. 使用QChart API 添加默认的坐标轴

QChart类有个API:

void QChart::createDefaultAxes()

可以根据QChart中已有的图表创建坐标轴,在程序中调用该函数,代码为:

Dialog::Dialog(QWidget *parent) :
    QDialog(parent),
    ui(new Ui::Dialog)
{
    ui->setupUi(this);
    int daily_temp_max[30] = {32,
            31,30,30,31,32,32,32,
            32,32,32,31,31,31,31,
            30,30,31,32,32,33,33,
            30,30,30,30,31,31,31,
            33};

    QLineSeries* temp_max_series = new QLineSeries();

    for(int i=0;i<30;i++)
        temp_max_series->append(i,daily_temp_max[i]);

    chart = new QChart();
    chart->addSeries(temp_max_series);

    chart->createDefaultAxes();
    ChartView = new QChartView(this);
    ChartView->setChart(chart);
    ui->verticalLayout->addWidget(ChartView);
}

显示结果为:

技术图片

2. 手动添加坐标轴

首先使用QValueAxis来创建坐标轴,如下:

 Dialog::Dialog(QWidget *parent) :
    QDialog(parent),
    ui(new Ui::Dialog)
{
    ui->setupUi(this);
    int daily_temp_max[30] = {32,
            31,30,30,31,32,32,32,
            32,32,32,31,31,31,31,
            30,30,31,32,32,33,33,
            30,30,30,30,31,31,31,
            33};

    QLineSeries* temp_max_series = new QLineSeries();

    for(int i=0;i<30;i++)
        temp_max_series->append(i,daily_temp_max[i]);


    chart = new QChart();
    chart->addSeries(temp_max_series);
    
    axisX = new QValueAxis();
    axisY = new QValueAxis();
    chart->addAxis(axisX,Qt::AlignBottom);
    chart->addAxis(axisY,Qt::AlignLeft);
    axisX->setRange(0, 30);
    axisY->setRange(28, 35);

    temp_max_series->attachAxis(axisX);
    temp_max_series->attachAxis(axisY);


    ChartView = new QChartView(this);
    ChartView->setChart(chart);
    ui->verticalLayout->addWidget(ChartView);
}

上面代码中:

    axisX = new QValueAxis();
    axisY = new QValueAxis();

是用来创建坐标轴的,这里创建2个坐标轴,然后把X轴添加到图表的底部,Y轴添加到图表的左边:

    chart->addAxis(axisX,Qt::AlignBottom);
    chart->addAxis(axisY,Qt::AlignLeft);

然后设置坐标轴的范围,由于有30个数据,所以把X轴设置为0-30,要显示的数据最大值为33,最小值为30,这里把Y轴设置为29-34,然后跟temp_max_series关联起来:

    axisX->setRange(0, 30);
    axisY->setRange(29, 34);

    temp_max_series->attachAxis(axisX);
    temp_max_series->attachAxis(axisY);

最后显示结果如下:

技术图片

3.datatime
Dialog::Dialog(QWidget *parent) :
    QDialog(parent),
    ui(new Ui::Dialog)
{
    ui->setupUi(this);
    int daily_temp_max[30] = {32,
            31,30,30,31,32,32,32,
            32,32,32,31,31,31,31,
            30,30,31,32,32,33,33,
            30,30,30,30,31,31,31,
            33};

    QLineSeries* temp_max_series = new QLineSeries();
    QDateTime Time;
    for(int i=0;i<30;i++)
    {

         Time.setDate(QDate(2019, 6 , i+1));
        temp_max_series->append(Time.toMSecsSinceEpoch(),daily_temp_max[i]);
    }

    chart = new QChart();
    chart->addSeries(temp_max_series);

    QDateTimeAxis *axisX = new QDateTimeAxis;
    QDateTime TimeMin;
    QDateTime TimeMax;
    TimeMin.setDate(QDate(2019, 6 , 1));
    TimeMax.setDate(QDate(2019, 6 , 30));
    axisX->setRange(TimeMin,TimeMax);
    axisX->setTickCount(10);
    axisX->setFormat("yyyy/M/d");
    axisX->setTitleText("Date");

    chart->addAxis(axisX, Qt::AlignBottom);


    axisY = new QValueAxis();
    chart->addAxis(axisY,Qt::AlignLeft);
    axisY->setRange(29, 34);

    temp_max_series->attachAxis(axisX);
    temp_max_series->attachAxis(axisY);


    ChartView = new QChartView(this);
    ChartView->setChart(chart);
    ui->verticalLayout->addWidget(ChartView);
}

技术图片

学习Qt Charts - Qt Charts的坐标轴

标签:中国天气   range   dai   工程   信息   qwidget   深圳   code   天气   

原文地址:https://www.cnblogs.com/halin/p/14745317.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!