码迷,mamicode.com
首页 > 数据库 > 详细

EdgeX研究-2 读取Modbus协议设备

时间:2021-06-02 11:26:47      阅读:0      评论:0      收藏:0      [点我收藏+]

标签:line   ssi   ret   dwr   ports   previous   https   bridge   script   

1、使用的基于下面这个链接的示例:

https://docs.edgexfoundry.org/1.2/examples/Ch-ExamplesAddingModbusDevice/

这个示例没有跑通,主要卡在这里的讲解配置文件和下载的版本对应不上,经过两天的摸索,使用如下方式实现

2、使用下面compose文件安装

技术图片
# /*******************************************************************************
#  * Copyright 2020 Redis Labs Inc.
#  * Copyright 2020 Intel Corporation.
#  *
#  * Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
#  * in compliance with the License. You may obtain a copy of the License at
#  *
#  * http://www.apache.org/licenses/LICENSE-2.0
#  *
#  * Unless required by applicable law or agreed to in writing, software distributed under the License
#  * is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
#  * or implied. See the License for the specific language governing permissions and limitations under
#  * the License.
#  *
#  * @author: Jim White, Dell
#  * @author: Andre Srinivasan, Redis Labs
#  * @author: Leonard Goodell, Intel
#  * EdgeX Foundry, Geneva, version 1.2.0
#  * added: May 14, 2020
#  *******************************************************************************/

# NOTE:  this Docker Compose file does not contain the security services - namely the API Gateway
# and Secret Store

version: 3.4

# all common shared environment variables defined here:
x-common-env-variables: &common-variables
  EDGEX_SECURITY_SECRET_STORE: "false"
  Registry_Host: edgex-core-consul
  Clients_CoreData_Host: edgex-core-data
  Clients_Data_Host: edgex-core-data # For device Services
  Clients_Notifications_Host: edgex-support-notifications
  Clients_Metadata_Host: edgex-core-metadata
  Clients_Command_Host: edgex-core-command
  Clients_Scheduler_Host: edgex-support-scheduler
  Clients_RulesEngine_Host: edgex-kuiper
  Clients_VirtualDevice_Host: edgex-device-virtual
  Databases_Primary_Host: edgex-redis
  # Required in case old configuration from previous release used.
  # Change to "true" if re-enabling logging service for remote logging
  Logging_EnableRemote: "false"
  #  Clients_Logging_Host: edgex-support-logging # un-comment if re-enabling logging service for remote logging

volumes:
  db-data:
  log-data:
  consul-config:
  consul-data:

services:
  consul:
    image: edgexfoundry/docker-edgex-consul:1.2.0
    ports:
      - "0.0.0.0:8400:8400"
      - "0.0.0.0:8500:8500"
    container_name: edgex-core-consul
    hostname: edgex-core-consul
    networks:
      - edgex-network
    volumes:
      - consul-config:/consul/config:z
      - consul-data:/consul/data:z
    environment: 
      - EDGEX_DB=redis
      - EDGEX_SECURE=false

  redis:
    image: redis:5.0.8-alpine
    ports:
      - "0.0.0.0:6379:6379"
    container_name: edgex-redis
    hostname: edgex-redis
    networks:
      - edgex-network
    environment:
      <<: *common-variables
    volumes:
      - db-data:/data:z

# The logging service has been deprecated in Geneva release and will be removed in the Hanoi release.
# All services are configure to send logging to STDOUT, i.e. not remote which requires this logging service
# If you still must use remote logging, un-comment the block below, all the related depends that have been commented out
# and the related global override that are commented out at the top.
#
#  logging:
#    image: edgexfoundry/docker-support-logging-go:1.2.1
#    ports:
#      - "0.0.0.0:48061:48061"
#    container_name: edgex-support-logging
#    hostname: edgex-support-logging
#    networks:
#      - edgex-network
#    environment:
#      <<: *common-variables
#      Service_Host: edgex-support-logging
#      Writable_Persistence: file
#      Databases_Primary_Type: file
#      Logging_EnableRemote: "false"
#    depends_on:
#      - consul

  system:
    image: edgexfoundry/docker-sys-mgmt-agent-go:1.2.1
    ports:
      - "0.0.0.0:48090:48090"
    container_name: edgex-sys-mgmt-agent
    hostname: edgex-sys-mgmt-agent
    networks:
      - edgex-network
    environment:
      <<: *common-variables
      Service_Host: edgex-sys-mgmt-agent
      ExecutorPath: /sys-mgmt-executor
      MetricsMechanism: executor
    volumes:
      - /var/run/docker.sock:/var/run/docker.sock:z
    depends_on:
      - consul
#      - logging  # uncomment if re-enabled remote logging
      - scheduler
      - notifications
      - metadata
      - data
      - command

  notifications:
    image: edgexfoundry/docker-support-notifications-go:1.2.1
    ports:
      - "0.0.0.0:48060:48060"
    container_name: edgex-support-notifications
    hostname: edgex-support-notifications
    networks:
      - edgex-network
    environment:
      <<: *common-variables
      Service_Host: edgex-support-notifications
    depends_on:
      - consul
#      - logging  # uncomment if re-enabled remote logging
      - redis

  metadata:
    image: edgexfoundry/docker-core-metadata-go:1.2.1
    ports:
      - "0.0.0.0:48081:48081"
    container_name: edgex-core-metadata
    hostname: edgex-core-metadata
    networks:
      - edgex-network
    environment:
      <<: *common-variables
      Service_Host: edgex-core-metadata
      Service_Timeout: "20000"
      Notifications_Sender: edgex-core-metadata
    depends_on:
      - consul
#      - logging  # uncomment if re-enabled remote logging
      - redis
      - notifications

  data:
    image: edgexfoundry/docker-core-data-go:1.2.1
    ports:
      - "0.0.0.0:48080:48080"
      - "0.0.0.0:5563:5563"
    container_name: edgex-core-data
    hostname: edgex-core-data
    networks:
      - edgex-network
    environment:
      <<: *common-variables
      Service_Host: edgex-core-data
    depends_on:
      - consul
#      - logging  # uncomment if re-enabled remote logging
      - redis
      - metadata

  command:
    image: edgexfoundry/docker-core-command-go:1.2.1
    ports:
      - "0.0.0.0:48082:48082"
    container_name: edgex-core-command
    hostname: edgex-core-command
    networks:
      - edgex-network
    environment:
      <<: *common-variables
      Service_Host: edgex-core-command
    depends_on:
      - consul
#      - logging  # uncomment if re-enabled remote logging
      - redis
      - metadata

  scheduler:
    image: edgexfoundry/docker-support-scheduler-go:1.2.1
    ports:
      - "0.0.0.0:48085:48085"
    container_name: edgex-support-scheduler
    hostname: edgex-support-scheduler
    networks:
      - edgex-network
    environment:
      <<: *common-variables
      Service_Host: edgex-support-scheduler
      IntervalActions_ScrubPushed_Host: edgex-core-data
      IntervalActions_ScrubAged_Host: edgex-core-data
    depends_on:
      - consul
#      - logging  # uncomment if re-enabled remote logging
      - redis

  app-service-rules:
    image: edgexfoundry/docker-app-service-configurable:1.2.0
    ports:
      - "0.0.0.0:48100:48100"
    container_name: edgex-app-service-configurable-rules
    hostname: edgex-app-service-configurable-rules
    networks:
      - edgex-network
    environment:
      <<: *common-variables
      edgex_profile: rules-engine
      Service_Host: edgex-app-service-configurable-rules
      Service_Port: 48100
      MessageBus_SubscribeHost_Host: edgex-core-data
      Binding_PublishTopic: events
    depends_on:
      - consul
#      - logging  # uncomment if re-enabled remote logging
      - data

  rulesengine:
    image: emqx/kuiper:0.4.2-alpine
    ports:
      - "0.0.0.0:48075:48075"
      - "0.0.0.0:20498:20498"
    container_name: edgex-kuiper
    hostname: edgex-kuiper
    networks:
      - edgex-network
    environment:
      # KUIPER_DEBUG: "true"
      KUIPER_CONSOLE_LOG: "true"
      KUIPER_REST_PORT: 48075
      EDGEX_SERVER: edgex-app-service-configurable-rules
      EDGEX_SERVICE_SERVER: http://edgex-core-data:48080
      EDGEX_TOPIC: events
      EDGEX_PROTOCOL: tcp
      EDGEX_PORT: 5566
    depends_on:
      - app-service-rules

  # Support RulesEngine has been deprecated in the Geneva (1.2.0) release
  # If still required, simply uncomment the block below and comment out the block above.
  #
  # rulesengine:
  #   image: edgexfoundry/docker-support-rulesengine:1.2.1
  #   ports:
  #     - "0.0.0.0:48075:48075"
  #   container_name: edgex-support-rulesengine
  #   hostname: edgex-support-rulesengine
  #   networks:
  #     - edgex-network
  #   depends_on:
  #     - app-service-rules

#################################################################
# Device Services
#################################################################

  device-virtual:
    image: edgexfoundry/docker-device-virtual-go:1.2.2
    ports:
    - "0.0.0.0:49990:49990"
    container_name: edgex-device-virtual
    hostname: edgex-device-virtual
    networks:
      - edgex-network
    environment:
      <<: *common-variables
      Service_Host: edgex-device-virtual
    depends_on:
      - consul
#      - logging  # uncomment if re-enabled remote logging
      - data
      - metadata

  device-rest:
    image: edgexfoundry/docker-device-rest-go:1.1.1
    ports:
      - "0.0.0.0:49986:49986"
    container_name: edgex-device-rest
    hostname: edgex-device-rest
    networks:
      - edgex-network
    environment:
      <<: *common-variables
      Service_Host: edgex-device-rest
    depends_on:
      - data
      - command
  #      - logging  # uncomment if re-enabled remote logging

  device-random:
    image: edgexfoundry/docker-device-random-go:1.2.1
    ports:
      - "0.0.0.0:49988:49988"
    container_name: edgex-device-random
    hostname: edgex-device-random
    networks:
      - edgex-network
    environment:
      <<: *common-variables
      Service_Host: edgex-device-random
    depends_on:
      - data
      - command

#  device-mqtt:
#    image: edgexfoundry/docker-device-mqtt-go:1.2.1
#    ports:
#      - "0.0.0.0:49982:49982"
#    container_name: edgex-device-mqtt
#    hostname: edgex-device-mqtt
#    networks:
#      - edgex-network
#    environment:
#      <<: *common-variables
#      Service_Host: edgex-device-mqtt
#    depends_on:
#      - data
#      - command
#
  device-modbus:
     image: edgexfoundry/docker-device-modbus-go:1.2.1
     ports:
       - "0.0.0.0:49991:49991"
     container_name: edgex-device-modbus
     hostname: edgex-device-modbus
     networks:
       - edgex-network
     environment:
       <<: *common-variables
       Service_Host: edgex-device-modbus
     depends_on:
       - data
       - command
 
#  device-snmp:
#    image: edgexfoundry/docker-device-snmp-go:1.2.1
#    ports:
#      - "0.0.0.0:49993:49993"
#    container_name: edgex-device-snmp
#    hostname: edgex-device-snmp
#    networks:
#      - edgex-network
#    environment:
#      <<: *common-variables
#      Service_Host: edgex-device-snmp
#    depends_on:
#      - data
#      - command
  ui:
    image: edgexfoundry/docker-edgex-ui-go:1.3.0
    ports:
      - "4000:4000"
    container_name: edgex-ui-go
    hostname: edgex-ui-go
    networks:
      - edgex-network
    volumes:
      - db-data:/data/db
      - log-data:/edgex/logs
      - consul-config:/consul/config
      - consul-data:/consul/data
    depends_on:
      - data
      - command
networks:
  edgex-network:
    driver: "bridge"
View Code

 

3、打开4000端口go-ui,界面如下、

技术图片

 

 如果DeviceService列表为空说明安装有问题,请从新安装。

技术图片

 

 上传配置文件

技术图片
name: "Network Power Meter"
manufacturer: "Dent Instruments"
model: "PS3037"
description: "Power Scout Meter"
labels:
  - "modbus"
  - "powerscout"
deviceResources:
  -
    name: "Current"
    description: "Average current of all phases"
    attributes:
      { primaryTable: "HOLDING_REGISTERS", startingAddress: "9" }
    properties:
      value:
        { type: "UINT16", scale: "1"}
      units:
        { type: "String", readWrite: "R", defaultValue: "min"}
  -
    name: "Energy"
    description: "System Total True Energy"
    attributes:
      { primaryTable: "HOLDING_REGISTERS", startingAddress: "4001" }
    properties:
      value:
        { type: "FLOAT32", scale: "1"}
      units:
        { type: "String", readWrite: "R", defaultValue: "min"}
  -
    name: "Power"
    description: "System Total True Power "
    attributes:
      { primaryTable: "HOLDING_REGISTERS", startingAddress: "4003" }
    properties:
      value:
        { type: "UINT16", scale: "1"}
      units:
        { type: "String", readWrite: "R", defaultValue: "min"}
  -
    name: "Voltage"
    description: "Voltage Line to line (Volts) Average"
    attributes:
      { primaryTable: "HOLDING_REGISTERS", startingAddress: "4017" }
    properties:
      value:
        { type: "UINT16", scale: "1"}
      units:
        { type: "String", readWrite: "R", defaultValue: "min"}
  -
    name: "DemandWindowSize"
    description: "Demand window size in minutes; default is 15 min"
    attributes:
      { primaryTable: "HOLDING_REGISTERS", startingAddress: "4603" }
    properties:
      value:
        { type: "UINT16", readWrite: "R", scale: "1"}
      units:
        { type: "String", readWrite: "R", defaultValue: "min"}
  -
    name: "LineFrequency"
    description: "Line frequency setting for metering: 50=50 Hz, 60=60Hz"
    attributes:
      { primaryTable: "HOLDING_REGISTERS", startingAddress: "4609" }
    properties:
      value:
        { type: "UINT16", readWrite: "R", scale: "1"}
      units:
        { type: "String", readWrite: "R", defaultValue: "Hz"}
deviceCommands:
  -
    name: "Current"
    get:
      - { index: "1", operation: "get", deviceResource: "Current" }
  -
    name: "Values"
    get:
      - { index: "1", operation: "get", deviceResource: "Energy" }
      - { index: "2", operation: "get", deviceResource: "Power" }
      - { index: "3", operation: "get", deviceResource: "Voltage" }
  -
    name: "Configuration"
    set:
      - { index: "1", operation: "set", deviceResource: "DemandWindowSize" }
      - { index: "2", operation: "set", deviceResource: "LineFrequency" }
    get:
      - { index: "1", operation: "get", deviceResource: "DemandWindowSize" }
      - { index: "2", operation: "get", deviceResource: "LineFrequency" }
coreCommands:
  -
    name: "Current"
    get:
      path: "/api/v1/device/{deviceId}/Current"
      responses:
        -
          code: "200"
          description: "Get the Current"
          expectedValues: ["Current"]
        -
          code: "500"
          description: "internal server error"
          expectedValues: []
  -
    name: "Values"
    get:
      path: "/api/v1/device/{deviceId}/Values"
      responses:
        -
          code: "200"
          description: "Get the Values"
          expectedValues: ["Energy","Power","Voltage"]
        -
          code: "500"
          description: "internal server error"
          expectedValues: []
  -
    name: "Configuration"
    get:
      path: "/api/v1/device/{deviceId}/Configuration"
      responses:
        -
          code: "200"
          description: "Get the Configuration"
          expectedValues: ["DemandWindowSize","LineFrequency"]
        -
          code: "500"
          description: "internal server error"
          expectedValues: []
    put:
      path: "/api/v1/device/{deviceId}/Configuration"
      parameterNames: ["DemandWindowSize","LineFrequency"]
      responses:
        -
          code: "204"
          description: "Set the Configuration"
          expectedValues: []
        -
          code: "500"
          description: "internal server error"
          expectedValues: []
View Code

技术图片

 

 4、添加设备

技术图片

 

 技术图片

 

 5、如果无法读取数据,重启下下docker即可。

 

EdgeX研究-2 读取Modbus协议设备

标签:line   ssi   ret   dwr   ports   previous   https   bridge   script   

原文地址:https://www.cnblogs.com/zhaogaojian/p/14813458.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!