码迷，mamicode.com
首页 > 其他好文 > 详细

NXOPEN 选择材料库对实体进行缩放比例

时间：2021-06-17 16:35:34      阅读：0      评论：0      收藏：0      [点我收藏+]

标签：color   created   star   min   sub   status   vector   let   方法   

VS2015 NX12

 

//关键代码

//用户代码
NXString YN_Shrinkage::doubleToNXString(double value)//double转换NXString
{
stringstream tmpValue1;
tmpValue1 << setprecision(16) << value;
return NXString(tmpValue1.str());
}

NXString YN_Shrinkage::intToNXString(int value)//int转换NXString
{
stringstream tmpValue2;
tmpValue2 << setprecision(16) << value;
return NXString(tmpValue2.str());
}

void YN_Shrinkage::SetUI() //设置UI
{
try
{
enumTypeValue= enumType->GetProperties()->GetEnum("Value");
if (enumTypeValue == 0)
{
expressionShrinkage->SetShow(true);
expressionShrinkageX->SetShow(false);
expressionShrinkageY->SetShow(false);
expressionShrinkageZ->SetShow(false);
}
else if (enumTypeValue == 1)
{
expressionShrinkage->SetShow(false);
expressionShrinkageX->SetShow(true);
expressionShrinkageY->SetShow(true);
expressionShrinkageZ->SetShow(true);
}

}
catch (exception& ex)
{
//---- Enter your exception handling code here -----
YN_Shrinkage::theUI->NXMessageBox()->Show("设置UI", NXOpen::NXMessageBox::DialogTypeError, "程序错误，请检查代码");
}
}

void YN_Shrinkage::RedMaterialLibrary() //读材料库
{
try
{

MaterialAndShrinkage1.clear();
Material1.clear();
Shrinkage1.clear();

UF_initialize();

//获取模板文档路径
char *translationDateInfofile;
UF_translate_variable("UGII_SITE_DIR", &translationDateInfofile);
string MaterialDensityDIR1 = translationDateInfofile;
string MaterialDensityDIR2 = "\\data\\MaterialShrinkage.dat";
string MaterialDensityPath = MaterialDensityDIR1 + MaterialDensityDIR2;
//theSession->ListingWindow()->WriteLine(translationColorManagementPath);

//指定本地数据文件的路径
int MaterialDensityStatus = 0;
//测试文件或目录是否存在
UF_CFI_ask_file_exist(MaterialDensityPath.c_str(), &MaterialDensityStatus);

if (MaterialDensityStatus == 1) //检测文件是否存在，0为存在，1为不存在
{
uc1601("请检查材料库文件是否存在.", 1);
return;
}
else if (MaterialDensityStatus == 0)//检测文件是否存在，0为存在，1为不存在
{
ifstream infile;
infile.open(MaterialDensityPath.c_str());

string MaterialShrinkage1;
while (getline(infile, MaterialShrinkage1))
{
if (MaterialShrinkage1.size())
{
MaterialAndShrinkage1.push_back(MaterialShrinkage1);
Material1.push_back(MaterialShrinkage1.substr(0, MaterialShrinkage1.find("-")));
Shrinkage1.push_back(MaterialShrinkage1.substr(MaterialShrinkage1.find("-收缩率：") + 1, 19));
}
}
infile.close(); //关闭文件输入流


}

stringMaterial->SetValue(Material1[1]); //设置stringMaterial默认值
stringMaterial->SetListItems(Material1); //塞字符到stringMaterial

UF_terminate();

}
catch (exception& ex)
{
//---- Enter your exception handling code here -----
YN_Shrinkage::theUI->NXMessageBox()->Show("读材料库", NXOpen::NXMessageBox::DialogTypeError, "程序错误，请检查代码");
}
}

void YN_Shrinkage::SetShrinkage() //设置收缩率
{
try
{
UF_initialize(); //初始化入口
//先获取里面的成员
std::vector <NXString> thestring01 = stringMaterial->GetListItems();

NXString str1 = stringMaterial->Value();

for (int i = 0; i < thestring01.size(); i++)
{
if (!strcmp(thestring01[i].GetLocaleText(), str1.GetLocaleText()))

{
string ShrinkageA = Shrinkage1[i].GetLocaleText();
//theSession->ListingWindow()->WriteLine(ShrinkageA);
string ShrinkageA1= ShrinkageA.substr(8, ShrinkageA.find("~")-8);
//theSession->ListingWindow()->WriteLine("最小："+ShrinkageA1);
string ShrinkageA2= ShrinkageA.substr(ShrinkageA.find("~") + 1, ShrinkageA.find(" "));
//theSession->ListingWindow()->WriteLine("最大："+ShrinkageA2);
expressionShrinkage->SetValue((atof(ShrinkageA1.c_str())+ atof(ShrinkageA2.c_str()))/2);//设置收缩率
expressionShrinkageX->SetValue((atof(ShrinkageA1.c_str()) + atof(ShrinkageA2.c_str())) / 2);//设置收缩率
expressionShrinkageY->SetValue((atof(ShrinkageA1.c_str()) + atof(ShrinkageA2.c_str())) / 2);//设置收缩率
expressionShrinkageZ->SetValue((atof(ShrinkageA1.c_str()) + atof(ShrinkageA2.c_str())) / 2);//设置收缩率
}
}
UF_terminate(); //入口终止代码

displayMaterialRemak(); //显示材料信息

}
catch (exception& ex)
{
//---- Enter your exception handling code here -----
YN_Shrinkage::theUI->NXMessageBox()->Show("设置收缩率", NXOpen::NXMessageBox::DialogTypeError, "程序错误，请检查代码");
}
}

void YN_Shrinkage::displayMaterialRemak() //显示材料信息
{
try
{
MaterialRemak.clear();
UF_initialize(); //初始化入口

std::vector <NXString> thestring01 = stringMaterial->GetListItems();

NXString str1 = stringMaterial->Value();

for (int i = 0; i < thestring01.size(); i++)
{
if (!strcmp(thestring01[i].GetLocaleText(), str1.GetLocaleText()))

{
string MaterialNote = MaterialAndShrinkage1[i].GetLocaleText();
//theSession->ListingWindow()->WriteLine(MaterialNote);

string MaterialName = MaterialNote.substr(0, MaterialNote.find("-"));
MaterialRemak.push_back(MaterialName);
//theSession->ListingWindow()->WriteLine(MaterialName);
string MaterialScale = MaterialNote.substr(MaterialNote.find("-收缩率：") + 1, MaterialNote.find("-熔料温度：")- MaterialNote.find("-收缩率：")-1);
MaterialRemak.push_back(MaterialScale);
//theSession->ListingWindow()->WriteLine(MaterialScale);
string MaterialTemperature = MaterialNote.substr(MaterialNote.find("-熔料温度：") + 1, MaterialNote.find("-模具温度：") - MaterialNote.find("-熔料温度：") - 1);
MaterialRemak.push_back(MaterialTemperature);
//theSession->ListingWindow()->WriteLine(MaterialTemperature);
string ToolingTemperature = MaterialNote.substr(MaterialNote.find("-模具温度：") + 1, MaterialNote.find("-注射压力：") - MaterialNote.find("-模具温度：") - 1);
MaterialRemak.push_back(ToolingTemperature);
//theSession->ListingWindow()->WriteLine(ToolingTemperature);
string MaterialPressure = MaterialNote.substr(MaterialNote.find("-注射压力：") + 1, MaterialNote.find("-注射速度：") - MaterialNote.find("-注射压力：") - 1);
MaterialRemak.push_back(MaterialPressure);
//theSession->ListingWindow()->WriteLine(MaterialPressure);
string MaterialSpeed = MaterialNote.substr(MaterialNote.find("-注射速度：") + 1, MaterialNote.find(" ") - MaterialNote.find("-注射速度：") - 1);
MaterialRemak.push_back(MaterialSpeed);
//theSession->ListingWindow()->WriteLine(MaterialSpeed);
}
}
//multiline_string0->GetProperties()->SetLogical("Enable", false);//设置控件不可更改
multiline_string0->SetValue(MaterialRemak);

UF_terminate(); //入口终止代码

}
catch (exception& ex)
{
//---- Enter your exception handling code here -----
YN_Shrinkage::theUI->NXMessageBox()->Show("显示材料信息", NXOpen::NXMessageBox::DialogTypeError, "程序错误，请检查代码");
}
}

void YN_Shrinkage::EditMaterialLibrary() //编辑材料库
{
try
{
UF_initialize();

//获取模板文档路径
char *translationDateInfofile;
UF_translate_variable("UGII_SITE_DIR", &translationDateInfofile);
string MaterialDensityDIR1 = translationDateInfofile;
string MaterialDensityDIR2 = "\\data\\MaterialShrinkage.dat";
string MaterialDensityPath = MaterialDensityDIR1 + MaterialDensityDIR2;
//theSession->ListingWindow()->WriteLine(translationColorManagementPath);

//指定本地数据文件的路径
int MaterialDensityStatus = 0;
//测试文件或目录是否存在
UF_CFI_ask_file_exist(MaterialDensityPath.c_str(), &MaterialDensityStatus);

if (MaterialDensityStatus == 1) //检测文件是否存在，0为存在，1为不存在
{
return;
}
else if (MaterialDensityStatus == 0)//检测文件是否存在，0为存在，1为不存在
{
//打开文件
//ShellExecute(NULL, _T("open"), _T( translationColorManagementPath.c_str() ), NULL, NULL, SW_NORMAL);//SW_SHOW SW_SHOWNORMAL
//方法一 项目属性需使用多节字符集
//指定用记事本打开指定的文件
ShellExecute(NULL, "open", "NotePad.exe", MaterialDensityPath.c_str(), NULL, SW_SHOWNORMAL);//SW_SHOW SW_SHOWNORMAL
//方法二
//char filedirectorypath2[256];
//sprintf(filedirectorypath2, "start \"\" \"%s\"", translationColorManagementPath.c_str());
////theSession->ListingWindow()->WriteLine(filedirectorypath2);
//system(filedirectorypath2); //打开路径
}

UF_terminate();

}
catch (exception& ex)
{
//---- Enter your exception handling code here -----
YN_Shrinkage::theUI->NXMessageBox()->Show("编辑材料库", NXOpen::NXMessageBox::DialogTypeError, "程序错误，请检查代码");
}
}

void YN_Shrinkage::ShrinkageBody() //缩放体
{
try
{
if (selectObjs.size() == 0)
{
return;
}

//获取比例
if (enumTypeValue == 0)
{
ShrinkageX = expressionShrinkage->Value();
ShrinkageY = expressionShrinkage->Value();
ShrinkageZ = expressionShrinkage->Value();
}
else if (enumTypeValue == 1)
{
ShrinkageX = expressionShrinkageX->Value();
ShrinkageY = expressionShrinkageY->Value();
ShrinkageZ = expressionShrinkageZ->Value();
}

if (isShrinkageCreat == true)
{
EditShrinkageBody(); //编辑缩放体
return;
}

//缩放体
NXOpen::Features::Feature *nullNXOpen_Features_Feature(NULL);
NXOpen::Features::ScaleBuilder *scaleBuilder1;
scaleBuilder1 = workPart->Features()->CreateScaleBuilder(nullNXOpen_Features_Feature);

scaleBuilder1->SetType(NXOpen::Features::ScaleBuilder::TypesGeneral);//三方向缩放体
//scaleBuilder1->UniformFactor()->SetRightHandSide("1.005");
//scaleBuilder1->ScaleAlongAxis()->SetRightHandSide("1");
//scaleBuilder1->ScaleOtherDirection()->SetRightHandSide("1");
scaleBuilder1->ScaleXdirection()->SetRightHandSide(doubleToNXString(ShrinkageX));//X方向比例
scaleBuilder1->ScaleYdirection()->SetRightHandSide(doubleToNXString(ShrinkageY));//Y方向比例
scaleBuilder1->ScaleZdirection()->SetRightHandSide(doubleToNXString(ShrinkageZ));//Y方向比例
NXOpen::ScCollector *scCollector1;
scCollector1 = workPart->ScCollectors()->CreateCollector();

std::vector<NXOpen::Body *> bodies1(selectObjs.size());
for (int i = 0; i < selectObjs.size(); i++)
{
Body *body1 = dynamic_cast<Body *>(selectObjs[i]);
bodies1[i] = body1;
}
//theSession->ListingWindow()->WriteLine("测试："+ intToNXString(bodies1.size()));
NXOpen::BodyDumbRule *bodyDumbRule1;
bodyDumbRule1 = workPart->ScRuleFactory()->CreateRuleBodyDumb(bodies1, true);

std::vector<NXOpen::SelectionIntentRule *> rules1(1);
rules1[0] = bodyDumbRule1;
scCollector1->ReplaceRules(rules1, false);
scaleBuilder1->SetBodyCollector(scCollector1);

NXOpen::Point *point1 = workPart->Points()->CreatePoint(ShrinkagePoint);

scaleBuilder1->SetPoint(point1);
NXOpen::Vector3d vector1(0.0, 0.0, 1.0);
NXOpen::Direction *direction1;
direction1 = workPart->Directions()->CreateDirection(ShrinkagePoint, vector1, NXOpen::SmartObject::UpdateOptionWithinModeling);
scaleBuilder1->SetVector(direction1);
NXOpen::Vector3d xDirection1(1.0, 0.0, 0.0);
NXOpen::Vector3d yDirection1(0.0, 1.0, 0.0);
NXOpen::Xform *xform1;
xform1 = workPart->Xforms()->CreateXform(ShrinkagePoint, xDirection1, yDirection1, NXOpen::SmartObject::UpdateOptionWithinModeling, 1.0);

NXOpen::CartesianCoordinateSystem *cartesianCoordinateSystem1;
cartesianCoordinateSystem1 = workPart->CoordinateSystems()->CreateCoordinateSystem(xform1, NXOpen::SmartObject::UpdateOptionWithinModeling);

scaleBuilder1->SetCsys(cartesianCoordinateSystem1);

//NXOpen::NXObject *nXObject1;
//nXObject1 = scaleBuilder1->Commit();
feature1 = scaleBuilder1->CommitFeature();

scaleBuilder1->Destroy();

isShrinkageCreat = true;


}
catch (exception& ex)
{
//---- Enter your exception handling code here -----
YN_Shrinkage::theUI->NXMessageBox()->Show("缩放体", NXOpen::NXMessageBox::DialogTypeError, "程序错误，请检查代码");
}
}

void YN_Shrinkage::EditShrinkageBody() //编辑缩放体
{
try
{
//theSession->ListingWindow()->WriteLine("编辑缩放体");
//缩放体
NXOpen::Features::Scale *EditShrinkageBody1 = dynamic_cast<NXOpen::Features::Scale *>(feature1);
NXOpen::Features::ScaleBuilder *scaleBuilder1;
scaleBuilder1 = workPart->Features()->CreateScaleBuilder(EditShrinkageBody1);

scaleBuilder1->SetType(NXOpen::Features::ScaleBuilder::TypesGeneral);//三方向缩放体
scaleBuilder1->ScaleXdirection()->SetRightHandSide(doubleToNXString(ShrinkageX));//X方向比例
scaleBuilder1->ScaleYdirection()->SetRightHandSide(doubleToNXString(ShrinkageY));//Y方向比例
scaleBuilder1->ScaleZdirection()->SetRightHandSide(doubleToNXString(ShrinkageZ));//Y方向比例
NXOpen::ScCollector *scCollector1;
scCollector1 = workPart->ScCollectors()->CreateCollector();

std::vector<NXOpen::Body *> bodies1(selectObjs.size());
for (int i = 0; i < selectObjs.size(); i++)
{
Body *body1 = dynamic_cast<Body *>(selectObjs[i]);
bodies1[i] = body1;
}

NXOpen::BodyDumbRule *bodyDumbRule1;
bodyDumbRule1 = workPart->ScRuleFactory()->CreateRuleBodyDumb(bodies1, true);

std::vector<NXOpen::SelectionIntentRule *> rules1(1);
rules1[0] = bodyDumbRule1;
scCollector1->ReplaceRules(rules1, false);
scaleBuilder1->SetBodyCollector(scCollector1);

NXOpen::Point *point1 = workPart->Points()->CreatePoint(ShrinkagePoint);

scaleBuilder1->SetPoint(point1);
NXOpen::Vector3d vector1(0.0, 0.0, 1.0);
NXOpen::Direction *direction1;
direction1 = workPart->Directions()->CreateDirection(ShrinkagePoint, vector1, NXOpen::SmartObject::UpdateOptionWithinModeling);
scaleBuilder1->SetVector(direction1);
NXOpen::Vector3d xDirection1(1.0, 0.0, 0.0);
NXOpen::Vector3d yDirection1(0.0, 1.0, 0.0);
NXOpen::Xform *xform1;
xform1 = workPart->Xforms()->CreateXform(ShrinkagePoint, xDirection1, yDirection1, NXOpen::SmartObject::UpdateOptionWithinModeling, 1.0);

NXOpen::CartesianCoordinateSystem *cartesianCoordinateSystem1;
cartesianCoordinateSystem1 = workPart->CoordinateSystems()->CreateCoordinateSystem(xform1, NXOpen::SmartObject::UpdateOptionWithinModeling);

scaleBuilder1->SetCsys(cartesianCoordinateSystem1);

markId1 = theSession->SetUndoMark(NXOpen::Session::MarkVisibilityVisible, "Shrinkagefeature1");

feature1 = scaleBuilder1->CommitFeature();

scaleBuilder1->Destroy();

isShrinkageCreat = true;


}
catch (exception& ex)
{
//---- Enter your exception handling code here -----
YN_Shrinkage::theUI->NXMessageBox()->Show("编辑缩放体", NXOpen::NXMessageBox::DialogTypeError, "程序错误，请检查代码");
}
}

 

技术图片

 

NXOPEN 选择材料库对实体进行缩放比例

标签：color   created   star   min   sub   status   vector   let   方法   

原文地址：https://www.cnblogs.com/hqsalanhuang/p/14891008.html
踩
(0)
赞
(0)
   
举报
评论 一句话评论（0）
登录后才能评论！
分享档案
更多>
2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)
周排行
mamicode.com排行更多图片
更多
友情链接
兰亭集智   国之画   百度统计   站长统计   阿里云   chrome插件   新版天听网
关于我们 - 联系我们 - 留言反馈
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码！