码迷，mamicode.com
首页 > 其他好文 > 详细

CentOS下Redis高可用安装笔记

时间：2015-01-05 13:19:48      阅读：250      评论：0      收藏：0      [点我收藏+]

标签：

(WJW)Redis高可用安装笔记

[x] 安装环境介绍:

Master: T1
Slave: T2
VIP: 192.168.68.45

[x] 安装Redis(Master,Slave)

注意: 安装redis前flushall的修改

查找src/redis.c文件,把

`{"flushdb",flushdbCommand,1,"w",0,NULL,0,0,0,0,0},`  
 `{"flushall",flushallCommand,1,"w",0,NULL,0,0,0,0,0},`

修改成:

`{"xflushdb",flushdbCommand,1,"w",0,NULL,0,0,0,0,0},`  
 `{"xflushall",flushallCommand,1,"w",0,NULL,0,0,0,0,0},`
vi /etc/sysctl.conf
添加一行: `vm.overcommit_memory=1`

mkdir /opt/redis
mkdir /opt/redis/log
mkdir /opt/redis/db

tar zxvf ./redis-2.8.17.tar.gz
cd redis-2.8.17
make PREFIX=/opt/redis install

[x] Redis启动脚本(Master,Slave):/opt/redis/bin/startRedis.sh

#!/bin/bash

basedir=`dirname $0`
echo "Redis BASE DIR:$basedir"
cd $basedir

nohup ./redis-server ./redis.conf > /dev/null 2>&1 &

[x] Redis停止脚本(Master,Slave):/opt/redis/bin/StopRedis.sh

#!/bin/sh

basedir=`dirname $0`
echo "Redis BASE DIR:$basedir"
cd $basedir

./redis-cli -h localhost -a 123456 shutdown

[x] Redis配置文件(Master,Slave):/opt/redis/bin/redis.conf

#requirepass 123456

pidfile /opt/redis/bin/redis.pid
logfile /opt/redis/log/redis.log
dir /opt/redis/db/

daemonize yes
port 6379
timeout 300
loglevel warning
databases 16
maxmemory 1g

#不要快照
#save 900 1
#save 300 10
#save 60 10000
#rdbcompression yes
#dbfilename dump.rdb

#使用AOF
appendonly yes
appendfsync everysec

[x] 安装Keepalived(Master,Slave):

#wget http://www.keepalived.org/software/keepalived-1.2.13.tar.gz
tar zxvf keepalived-1.2.13.tar.gz
cd ./keepalived-1.2.13
./configure
make 
make install

cp /usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
cp /usr/local/sbin/keepalived /usr/sbin/
mkdir /etc/keepalived
cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/
chkconfig --add keepalived
#chkconfig --level 35 keepalived on
#service keepalived start

[x] notify_*解释

Keepalived在转换状态时会依照状态来呼叫：
当进入Master状态时会呼叫notify_master
当进入Backup状态时会呼叫notify_backup
当发现异常情况时(track_script,track_interface失败)进入Fault状态呼叫notify_fault
当Keepalived程序终止时则呼叫notify_stop

[x] 在Master上创建如下配置文件：

vim /etc/keepalived/keepalived.conf

! Configuration File for keepalived

global_defs {
   notification_email {
     root@localhost
   }
   notification_email_from root@localhost
   smtp_server localhost
   smtp_connect_timeout 30
   router_id LVS_REDIS
}

vrrp_script chk_redis {
  script "/etc/keepalived/scripts/redis_check.sh"   ###监控脚本
  interval 2                                        ###监控时间
}

vrrp_instance VI_1 {
    nopreempt ###不抢占,防止脑裂
    state MASTER             #备的是BACKUP
    interface br0
    virtual_router_id 51
    priority 100            #备的是90
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass redis
    }
    virtual_ipaddress {
        192.168.68.45
    }

    track_script {
      chk_redis                       ###执行上面定义的chk_redis
    }

    notify_master /etc/keepalived/scripts/redis_master.sh
    notify_backup /etc/keepalived/scripts/redis_backup.sh
    notify_fault  /etc/keepalived/scripts/redis_fault.sh
    notify_stop   /etc/keepalived/scripts/redis_stop.sh
}

[x] 在Slave上创建如下配置文件：

vim /etc/keepalived/keepalived.conf

! Configuration File for keepalived

global_defs {
   notification_email {
     root@localhost
   }
   notification_email_from root@localhost
   smtp_server localhost
   smtp_connect_timeout 30
   router_id LVS_REDIS
}

vrrp_script chk_redis {
  script "/etc/keepalived/scripts/redis_check.sh"   ###监控脚本
  interval 2                                        ###监控时间
}

vrrp_instance VI_1 {
    nopreempt ###不抢占,防止脑裂
    state BACKUP             #备的是BACKUP
    interface br0
    virtual_router_id 51
    priority 90            #备的是90
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass redis
    }
    virtual_ipaddress {
        192.168.68.45
    }

    track_script {
      chk_redis                       ###执行上面定义的chk_redis
    }

    notify_master /etc/keepalived/scripts/redis_master.sh
    notify_backup /etc/keepalived/scripts/redis_backup.sh
    notify_fault  /etc/keepalived/scripts/redis_fault.sh
    notify_stop   /etc/keepalived/scripts/redis_stop.sh
}

[x] 在Master和Slave上创建监控Redis的脚本:

mkdir /etc/keepalived/scripts/
vi /etc/keepalived/scripts/redis_check.sh

#!/bin/bash

C_DATE=`date +"[%Y-%m-%d %H:%M:%S]"`
ALIVE=`/opt/redis/bin/redis-cli PING`

if [ "$ALIVE" == "PONG" ]; then
  echo "${C_DATE} $ALIVE"
  exit 0
else
  echo "${C_DATE} $ALIVE"
  exit 1
fi

[x] 在Master与Slave创建如下脚本notify_fault和notify_stop：

vim /etc/keepalived/scripts/redis_fault.sh

#!/bin/bash

C_DATE=`date +"[%Y-%m-%d %H:%M:%S]"`
LOGFILE=/var/log/keepalived-redis-state.log

echo "${C_DATE} [fault]" >> $LOGFILE

vim /etc/keepalived/scripts/redis_stop.sh

#!/bin/bash

C_DATE=`date +"[%Y-%m-%d %H:%M:%S]"`
LOGFILE=/var/log/keepalived-redis-state.log

echo "${C_DATE} [stop]" >> $LOGFILE

[x] 在Master上创建notity_master与notify_backup脚本:

vim /etc/keepalived/scripts/redis_master.sh

#!/bin/bash

C_DATE=`date +"[%Y-%m-%d %H:%M:%S]"`
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"

echo "${C_DATE} [master]" >> $LOGFILE

#当keepalived配置为"抢占式"时,打开下面注释
#echo "Being master...." >> $LOGFILE 2>&1
#echo "Run SLAVEOF cmd ..." >> $LOGFILE
#$REDISCLI SLAVEOF T2 6379 >> $LOGFILE  2>&1
#sleep 10 #延迟10秒以后待数据同步完成后再取消同步状态

echo "Run SLAVEOF NO ONE cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1

vim /etc/keepalived/scripts/redis_backup.sh

#!/bin/bash

C_DATE=`date +"[%Y-%m-%d %H:%M:%S]"`
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"

echo "${C_DATE} [backup]" >> $LOGFILE

#当keepalived配置为"抢占式"时,打开下面注释
#echo "Being slave...." >> $LOGFILE 2>&1
#sleep 15 #延迟15秒待数据被对方同步完成之后再切换主从角色

echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF T2 6379 >> $LOGFILE  2>&1

[x] 在Slave上创建notity_master与notify_backup脚本:

vim /etc/keepalived/scripts/redis_master.sh

#!/bin/bash

C_DATE=`date +"[%Y-%m-%d %H:%M:%S]"`
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"

echo "${C_DATE} [master]" >> $LOGFILE

#当keepalived配置为"抢占式"时,打开下面注释
#echo "Being master...." >> $LOGFILE 2>&1
#echo "Run SLAVEOF cmd ..." >> $LOGFILE
#$REDISCLI SLAVEOF T1 6379 >> $LOGFILE  2>&1
#sleep 10 #延迟10秒以后待数据同步完成后再取消同步状态

echo "Run SLAVEOF NO ONE cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1

vim /etc/keepalived/scripts/redis_backup.sh

#!/bin/bash

C_DATE=`date +"[%Y-%m-%d %H:%M:%S]"`
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"

echo "${C_DATE} [backup]" >> $LOGFILE

#当keepalived配置为"抢占式"时,打开下面注释
#echo "Being slave...." >> $LOGFILE 2>&1
#sleep 15 #延迟15秒待数据被对方同步完成之后再切换主从角色

echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF T1 6379 >> $LOGFILE  2>&1

[x] 在Master和Slave上,给监控脚本都加上可执行权限：

chmod +x /etc/keepalived/scripts/*.sh

[x] 启动步骤:

  1. 启动Master上的Redis
    /opt/redis/bin/startRedis.sh

  2. 启动Slave上的Redis
    /opt/redis/bin/startRedis.sh

  3. 启动Master上的Keepalived
    service keepalived start

  4. 启动Slave上的Keepalived
    service keepalived start

CentOS下Redis高可用安装笔记

标签：

原文地址：http://my.oschina.net/wstone/blog/363784
踩
(0)
赞
(0)
   
举报
评论 一句话评论（0）
登录后才能评论！
分享档案
更多>
2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)
周排行
mamicode.com排行更多图片
更多
友情链接
兰亭集智   国之画   百度统计   站长统计   阿里云   chrome插件   新版天听网
关于我们 - 联系我们 - 留言反馈
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码！