标签：des style blog code http tar
Producers create messages and publish (send) them to a broker server (RabbitMQ).
A message has two parts: a payload and a label.
Consumers attach to a broker server and subscribe to a queue. Think of a queue as a named mailbox.
Channels:
three parts to any successful routing of an AMQP message: exchanges, queues, andbindings.
The exchanges are where producers publish their messages, queues are where the messages end up and are received by consumers, and bindings are how the messages get routed from the exchange to particular queues.
Consumers receive messages from a particular queue in one of two ways:
If one or more consumers are subscribed to a queue, messages are sent immediately to the subscribed consumers.
If a message arrives at a queue with no subscribed consumers, the message waits in the queue.
When a Rabbit queue has multiple consumers, messages received by the queue are served in a round-robin fashion to the consumers.
Each message is sent to only one consumer subscribed to the queue.
Let’s say you had a queue named seed_bin and consumers Farmer Bob and Farmer Esmeralda subscribed to seed_bin.
1 Message_A arrives in the seed_bin queue.
2 RabbitMQ sends Message_A to Farmer Bob.
3 Farmer Bob acknowledges receipt of Message_A.
4 RabbitMQ removes Message_A from the seed_bin queue.
5 Message_B arrives in the seed_bin queue.
6 RabbitMQ sends Message_B to Farmer Esmeralda.
7 Farmer Esmeralda acknowledges receipt of Message_B.
8 RabbitMQ removes Message_B from the seed_bin queue.
Every message that’s received by a consumer is required to be acknowledged. Either the consumer must explicitly send an acknowledgement to RabbitMQ using the basic.ack AMQP command, or it can set the auto_ack parameter to true when it subscribes to the queue.
The acknowledgements are a way for the consumer to confirm to RabbitMQ that the consumer has correctly received the message and RabbitMQ can safely remove it from the queue.
If a consumer receives a message and then disconnects from Rabbit (or unsubscribes from the queue) before acknowledging, RabbitMQ will consider the message undelivered and redeliver it to the next subscribed consumer.
if your consumer app has a bug and forgets to acknowledge a message, Rabbit won’t send the consumer any more messages. This is because Rabbit considers the consumer not ready to receive another message until it acknowledges the last one it received.
if you want to specifically reject a message rather than acknowledge it, use the basic.reject AMQP command. If you set the requeue parameter of
the reject command to true, RabbitMQ will redeliver the message to the next subscribed consumer. Setting requeue to false will cause RabbitMQ to remove the message from the queue immediately without resending it to a new consumer.
Both consumers and producers can create queues by using the queue.declare AMQP command.
But consumers can’t declare a queue while subscribed to another one on the same channel. They must first unsubscribe in order to place the channel in a “transmit” mode.
Here are some other useful properties you can set for the queue:
if you try to declare a queue that already exists, Rabbit will do nothing and return successfully as though the queue had been created.
With passive set to true, queue.declare will return successfully if the queue exists, and return an error without creating the queue if it doesn’t exist.
Messages that get published into an exchange but have no queue to be routed to are discarded by Rabbit.
So if you can’t afford for your messages to be black-holed, both your producers and your consumers should attempt to create the queues that will be needed.
the broker will route messages from exchanges to queues based on routing keys
four types of exchanges:direct, fanout, topic, and headers.
headers exchange allows you to match against a header in the AMQP message instead of the routing key. low performance.
The direct exchange is pretty simple: if the routing key matches, then the message is delivered to the corresponding queue.
fanout exchange will multicast the received message to the bound queues. The messaging pattern is simple: when you send a message to a fanout exchange, it’ll be delivered to all the queues attached to this exchange.
You have several logging levels, like error, info, and warning, and at the same time your application is separated into modules like user-profile, image-gallery, msg-inbox, and so forth.
if you want to report an error when the send message action failed, you can do so with the following code:
$channel->basic_publish($msg, ‘logs-exchange‘, ‘error.msg-inbox‘);
if you declared a queue msg-inbox-errors :
$channel->queue_bind(‘msg-inbox-errors‘, ‘logs-exchange‘, ‘error.msg-inbox‘);
if you want to have a queue listening to all kinds of error levels that happen in the msg-inbox module:
$channel->queue_bind(‘msg-inbox-logs‘, ‘logs-exchange‘, ‘*.msg-inbox‘);
for receiving all the logs:
$channel->queue_bind(‘all-logs‘, ‘logs-exchange‘, ‘#‘);
Within every RabbitMQ server is the ability to create virtual message brokers called virtual hosts (vhosts).
Each one is essentially a mini-RabbitMQ server with its own queues, exchanges, and bindings and its own permissions.
When you create a user in Rabbit, it’s usually assigned to at least one vhost and will only be able to access queues, exchanges, and bindings on those assigned vhosts.
To create a vhost simply run rabbitmqctl add_vhost [vhost_name], where [vhost_name] is the vhost you want to create.
Deleting a vhost is similarly simple: rabbitmqctl delete_vhost [vhost_name].
Once a vhost has been created, you can connect to it and start adding your queues and exchanges.
A message that’s in flight inside Rabbit to survive a crash, the message must:
The way that RabbitMQ ensures persistent messages survive a restart is by writing them to the disk inside of a persistency log file.
The act of writing messages to disk is much slower than just storing them in RAM.
Though RabbitMQ clustering allows you to talk to any queue present in the cluster from any node, those queues are actually evenly distributed among the nodes without redundancy. If the cluster node hosting your seed_bin queue crashes, the queue disappears from the cluster until the node is restored (if durable). More important, while the node is down its queues aren’t available and the durable ones can’t be re-created. This can lead to black-holing of messages.
Other ways : your producer could listen to a reply queue on a separate channel. Every time it publishes a message, it includes the name of the reply queue so that the consumer can send a reply back to confirm receipt. If a message isn’t replied to within a reasonable amount of time, the producer can republish the message.
In AMQP, after you place a channel into transaction mode, you send it the publish you want to confirm, followed by zero or more other AMQP commands that should be executed or ignored depending on whether the initial publish succeeded. Once you’ve sent all of the commands, you commit the transaction. If the transaction’s initial publish succeeds, then the channel will complete the other AMQP commands in the transaction. If the publish fails, none of the other AMQP commands will be executed.
a better way to ensure message delivery: publisher confirms
Once a channel is in confirm mode, every message published on the channel will be assigned a unique ID number (starting at 1). Once the message has been delivered to all queues that have bindings matching the message’s routing key, the channel will issue a publisher confirm to the producer app
It is asynchronous. Once a message has been published, the producer app can go on to the next message while waiting for the confirm. When the confirm for that message is finally received, a callback function in the producer app will be fired so it can wake up and handle the confirmation.
the first message published on any channel, will have an ID of 1, and every subsequent message on the channel will increment that
ID by 1.
The message IDs are unique to the channel.
RabbitMQ doesn’t have to tell you the ID of the message you just published; you keep track of it yourself in a counter internal to your app and increment that counter every time your app’s channel publishes.
RabbitMQ in Action (1): Understanding messaging,布布扣,bubuko.com
RabbitMQ in Action (1): Understanding messaging
标签：des style blog code http tar
原文地址：http://www.cnblogs.com/popsuper1982/p/3800237.html
