码迷,mamicode.com
首页 > 数据库 > 详细

oracle性能检测sql语句

时间:2014-06-27 19:18:03      阅读:273      评论:0      收藏:0      [点我收藏+]

标签:des   class   code   ext   get   使用   

1. 监控事例的等待 select event,sum(decode(wait_Time,0,0,1)) "Prev",sum(decode(wait_Time,0,1,0)) "Curr",count(*) "Tot"  from v$session_Wait group by event order by 4;

注解:order by 4 指按第4列进行排序

 

2. 回滚段的争用情况 select name, waits, gets, waits/gets "Ratio"  from v$rollstat a, v$rollname b  where a.usn = b.usn;

3. 监控表空间的 I/O 比例 select df.tablespace_name name,df.file_name "file",f.phyrds pyr,f.phyblkrd pbr,f.phywrts pyw, f.phyblkwrt pbw  from v$filestat f, dba_data_files df  where f.file# = df.file_id order by df.tablespace_name;

4. 监控文件系统的 I/O 比例 select substr(a.file#,1,2) "#", substr(a.name,1,30) "Name",a.status, a.bytes, b.phyrds, b.phywrts  from v$datafile a, v$filestat b  where a.file# = b.file#;

5.在某个用户下找所有的索引 select user_indexes.table_name, user_indexes.index_name,uniqueness,column_name  from user_ind_columns, user_indexes  where user_ind_columns.index_name = user_indexes.index_name and user_ind_columns.table_name = user_indexes.table_name order by user_indexes.table_type,user_indexes.table_name,user_indexes.index_name, column_position;

6. 监控 SGA 的命中率 select a.value + b.value "logical_reads", c.value "phys_reads",round(100 * ((a.value+b.value)-c.value) / (a.value+b.value)) "BUFFER HIT RATIO"  from v$sysstat a, v$sysstat b, v$sysstat c  where a.statistic# = 38 and b.statistic# = 39 and c.statistic# = 40;

7. 监控 SGA 中字典缓冲区的命中率 select parameter, gets,Getmisses , getmisses/(gets+getmisses)*100 "miss ratio",(1-(sum(getmisses)/ (sum(gets)+sum(getmisses))))*100 "Hit ratio"  from v$rowcache  where gets+getmisses <>0 group by parameter, gets, getmisses;

8. 监控 SGA 中共享缓存区的命中率,应该小于1% select sum(pins) "Total Pins", sum(reloads) "Total Reloads",sum(reloads)/sum(pins) *100 libcache  from v$librarycache;    select sum(pinhits-reloads)/sum(pins) "hit radio",sum(reloads)/sum(pins) "reload percent"  from v$librarycache;

9. 显示所有数据库对象的类别和大小 select count(name) num_instances ,type,sum(source_size) source_size,sum(parsed_size) parsed_size ,sum(code_size) code_size ,sum(error_size) error_size, sum(source_size) +sum(parsed_size) +sum(code_size) +sum(error_size) size_required  from dba_object_size  group by type order by 2;

10. 监控 SGA 中重做日志缓存区的命中率,应该小于1% SELECT name, gets, misses, immediate_gets, immediate_misses,Decode(gets,0,0,misses/gets*100) ratio1, Decode(immediate_gets+immediate_misses,0,0,immediate_misses/(immediate_gets+immediate_misses)*100) ratio2 FROM v$latch  WHERE name IN (‘redo allocation‘, ‘redo copy‘);

11.   监控内存和硬盘的排序比率,最好使它小于 .10,增加 sort_area_size SELECT name, value FROM v$sysstat WHERE name IN (‘sorts (memory)‘, ‘sorts (disk)‘);

12. 监控当前数据库谁在运行什么SQL语句 SELECT osuser, username, sql_text from v$session a, v$sqltext b  where a.sql_address =b.address order by address, piece;

13. 监控字典缓冲区 select (sum(pins - reloads)) / sum(pins) "lib cache" from v$librarycache; select (sum(gets - getmisses - usage - fixed)) / sum(gets) "row cache" from v$rowcache; select sum(pins) "executions", sum(reloads) "cache misses while executing" from v$librarycache;

后者除以前者,此比率小于1%,接近0%为好。 select sum(gets) "dictionary gets",sum(getmisses) "dictionary cache get misses",sum(getmisses)/sum(gets) from v$rowcache

14. 找ORACLE字符集(也可以用来查看日期格式) select * from sys.props$ where name=‘NLS_CHARACTERSET‘;

15. 监控 MTS select busy/(busy+idle) "shared servers busy" from v$dispatcher; 此值大于0.5时,参数需加大

select sum(wait)/sum(totalq) "dispatcher waits" from v$queue where type=‘dispatcher‘; select count(*) from v$dispatcher; select servers_highwater from v$mts; servers_highwater接近mts_max_servers时,参数需加大

16. 碎片程度 select tablespace_name,count(tablespace_name) from dba_free_space group by tablespace_name having count(tablespace_name)>10;

alter tablespace name coalesce; alter table name deallocate unused;

create or replace view ts_blocks_v as    select tablespace_name,block_id,bytes,blocks,‘free space‘ segment_name from dba_free_space    union all    select tablespace_name,block_id,bytes,blocks,segment_name from dba_extents;

select * from ts_blocks_v; select tablespace_name,sum(bytes),max(bytes),count(block_id) from dba_free_space group by tablespace_name;

查看碎片程度高的表 SELECT segment_name table_name , COUNT(*) extents  FROM dba_segments  WHERE owner NOT IN (‘IES‘)  GROUP BY segment_name HAVING COUNT(*) = (SELECT MAX( COUNT(*) ) FROM dba_segments GROUP BY segment_name);

17. 表、索引的存储情况检查 select segment_name,sum(bytes),count(*) ext_quan  from dba_extents  where tablespace_name=‘&tablespace_name‘ and segment_type=‘TABLE‘ group by tablespace_name,segment_name;

select segment_name,count(*) from dba_extents where segment_type=‘INDEX‘ and owner=‘&owner‘ group by segment_name;

18、找使用CPU多的用户session

12是cpu used by this session select a.sid,spid,status,substr(a.program,1,40) prog,a.terminal,osuser,value/60/100 value from v$session a,v$process b,v$sesstat c where c.statistic#=12 and c.sid=a.sid and a.paddr=b.addr order by value desc;

 

19、查看表空间使用情况的SQL语句:    select a.tablespace_name "表空间名",total 表空间大小,free 表空间剩余大小,    (total-free) 表空间使用大小, round((total-free)/total,4)*100   "使用率   %", (select file_name from dba_data_files where tablespace_name=a.tablespace_name and rownum<2) "文件名"    from       (select tablespace_name,sum(bytes) free  from dba_free_space group by tablespace_name) a,     (select tablespace_name,sum(bytes) total from dba_data_files group by tablespace_name) b    where a.tablespace_name=b.tablespace_name     --创建表空间及数据文件   create tablespace iests datafile ‘C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORACLE\IES_1.DBF‘ size 200m reuse autoextend on next 50m; --给表空间添加数据文件 alter tablespace iests add datafile ‘C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORACLE\IES_2.DBF‘ size 200m reuse autoextend on next 50m; --扩展已有数据文件的大小 alter database datafile ‘C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORACLE\SYSTEM01.DBF‘ resize 600M;

oracle性能检测sql语句,布布扣,bubuko.com

oracle性能检测sql语句

标签:des   class   code   ext   get   使用   

原文地址:http://www.cnblogs.com/zwl715/p/3809765.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!