码迷,mamicode.com
首页 > 其他好文 > 详细

samba应用常见问题 和 修改后的smb.conf文件

时间:2015-07-19 15:03:54      阅读:518      评论:0      收藏:0      [点我收藏+]

标签:

 一.samba的安装:

sudo apt-get insall samba
sudo apt-get install smbfs

二. 创建共享目录:

mkdir /home/phinecos/share
sodu chmod 777 /home/phinecos/share

三. 创建Samba配置文件:

1. 保存现有的配置文件

sudo cp /etc/samba/smb.conf /etc/samba/smb.conf.bak

2. 修改现配置文件

sudo gedit /etc/samba/smb.conf

在smb.conf最后添加

[share]
      path = /home/phinecos/share
      available = yes
      browsealbe = yes
      public = yes
      writable = yes

四. 创建samba帐户

  sudo touch /etc/samba/smbpasswd
  sudo smbpasswd -a phinecos

然后会要求你输入samba帐户的密码

 [如果没有第四步,当你登录时会提示 session setup failed: NT_STATUS_LOGON_FAILURE]

 五. 重启samba服务器

sudo /etc/init.d/samba restart

六. 测试

smbclient -L //localhost/share

七,使用

可以到windows下输入ip使用了,在文件夹处输入 "\\" + "Ubuntu机器的ip或主机名" + "\\" + "share"




问题1:

在CENTOS上配了个SAMBA与WINDOW共享文件。

一访问共享目录就”NT_STATUS_ACCESS_DENIED listing \*“ ,找了好久,发现是SELINUX阻挡了。

解决方法:彻底关闭SELIUNX


问题2:
局域网内的共享文件能访问,但是samba服务器上的共享文件不能访问。
解决方法:
1、把samba服务器(linux)上的共享文件夹的属性改为777,命令为:chmode 777 samba_share_floder
2、关闭SELIUNX
[root@linux /]# getenforce ;查看当前状态
Enforcing 

[root@linux /]# setenforce 0 ;关闭


======================以下是修改后的smb.conf文件:=========================

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba, 
# read the Samba-HOWTO-Collection. This may be obtained from:
#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the 
# Samba-Guide which is generated daily and can be downloaded from: 
#  http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors. 
#
#---------------
# SELINUX NOTES:
#
# If you want to use the useradd/groupadd family of binaries please run:
# setsebool -P samba_domain_controller on
#
# If you want to share home directories via samba please run:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory you want to share you should mark it as
# "samba_share_t" so that selinux will let you write into it.
# Make sure not to do that on system directories as they may already have
# been marked with othe SELinux labels.
#
# Use ls -ldZ /path to see which context a directory has
#
# Set labels only on directories you created!
# To set a label use the following: chcon -t samba_share_t /path
#
# If you need to share a system created directory you can use one of the
# following (read-only/read-write):
# setsebool -P samba_export_all_ro on
# or
# setsebool -P samba_export_all_rw on
#
# If you want to run scripts (preexec/root prexec/print command/...) please
# put them into the /var/lib/samba/scripts directory so that smbd will be
# allowed to run them.
# Make sure you COPY them and not MOVE them so that the right SELinux context
# is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts
#
#--------------
#
#======================= Global Settings =====================================
	
[global]
	
# ----------------------- Network Related Options -------------------------
#
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
#
# server string is the equivalent of the NT Description field
#
# netbios name can be used to specify a server name not tied to the hostname
#
# Interfaces lets you configure Samba to use multiple interfaces
# If you have multiple network interfaces then you can list the ones
# you want to listen on (never omit localhost)
#
# Hosts Allow/Hosts Deny lets you restrict who can connect, and you can
# specifiy it as a per share option as well
#
;	workgroup = MYGROUP
	workgroup = Workgroup
	server string = Samba_Server_information:Samba Server Version %v
	
;	netbios name = MYSERVER
	netbios name = mysamba
	
;	interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24 
;	hosts allow = 127. 192.168.12. 192.168.13.
	
# --------------------------- Logging Options -----------------------------
#
# Log File let you specify where to put logs and how to split them up.
#
# Max Log Size let you specify the max size log files should reach
	
	# logs split per machine
	log file = /var/log/samba/log.%m
	# max 50KB per log file, then rotate
	max log size = 50
	
# ----------------------- Standalone Server Options ------------------------
#
# Scurity can be set to user, share(deprecated) or server(deprecated)
#
# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.


;	security = user
	security = share
	passdb backend = tdbsam




# ----------------------- Domain Members Options ------------------------
#
# Security must be set to domain or ads
#
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
#
# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.
#
# Use password server option only with security = server or if you can‘t
# use the DNS to locate Domain Controllers
# The argument list may include:
#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#   password server = *
	
	
;	security = domain
;	passdb backend = tdbsam
;	realm = MY_REALM


;	password server = <NT-Server-Name>


# ----------------------- Domain Controller Options ------------------------
#
# Security must be set to user for domain controllers
#
# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.
#
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don‘t use this
# if you already have a Windows NT domain controller doing this job
#
# Domain Logons let Samba be a domain logon server for Windows workstations. 
#
# Logon Scrpit let yuou specify a script to be run at login time on the client
# You need to provide it in a share called NETLOGON
#
# Logon Path let you specify where user profiles are stored (UNC path)
#
# Various scripts can be used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
#
;	security = user
;	passdb backend = tdbsam
	
;	domain master = yes 
;	domain logons = yes
	
	# the login script name depends on the machine name
;	logon script = %m.bat
	# the login script name depends on the unix user used
;	logon script = %u.bat
;	logon path = \\%L\Profiles\%u
	# disables profiles support by specifing an empty path
;	logon path =          
	
;	add user script = /usr/sbin/useradd "%u" -n -g users
;	add group script = /usr/sbin/groupadd "%g"
;	add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
;	delete user script = /usr/sbin/userdel "%u"
;	delete user from group script = /usr/sbin/userdel "%u" "%g"
;	delete group script = /usr/sbin/groupdel "%g"
	
	
# ----------------------- Browser Control Options ----------------------------
#
# set local master to no if you don‘t want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
#
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
#
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;	local master = no
;	os level = 33
;	preferred master = yes
	
#----------------------------- Name Resolution -------------------------------
# Windows Internet Name Serving Support Section:
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
#
# - WINS Support: Tells the NMBD component of Samba to enable it‘s WINS Server
#
# - WINS Server: Tells the NMBD components of Samba to be a WINS Client
#
# - WINS Proxy: Tells Samba to answer name resolution queries on
#   behalf of a non WINS capable client, for this to work there must be
#   at least one	WINS Server on the network. The default is NO.
#
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups.
	
;	wins support = yes
;	wins server = w.x.y.z
;	wins proxy = yes
	
;	dns proxy = yes
	
# --------------------------- Printing Options -----------------------------
#
# Load Printers let you load automatically the list of printers rather
# than setting them up individually
#
# Cups Options let you pass the cups libs custom options, setting it to raw
# for example will let you use drivers on your Windows clients
#
# Printcap Name let you specify an alternative printcap file
#
# You can choose a non default printing system using the Printing option
	
	load printers = yes
	cups options = raw


;	printcap name = /etc/printcap
	#obtain list of printers automatically on SystemV
;	printcap name = lpstat
;	printing = cups


# --------------------------- Filesystem Options ---------------------------
#
# The following options can be uncommented if the filesystem supports
# Extended Attributes and they are enabled (usually by the mount option
# user_xattr). Thess options will let the admin store the DOS attributes
# in an EA and make samba not mess with the permission bits.
#
# Note: these options can also be set just per share, setting them in global
# makes them the default for all shares


;	map archive = no
;	map hidden = no
;	map read only = no
;	map system = no
;	store dos attributes = yes




#============================ Share Definitions ==============================
	
[homes]
	comment = Home Directories
	browseable = no
	writable = yes
;	valid users = %S
;	valid users = MYDOMAIN\%S
	
[printers]
	comment = All Printers
	path = /var/spool/samba
	browseable = no
	guest ok = no
	writable = no
	printable = yes
	
# Un-comment the following and create the netlogon directory for Domain Logons
;	[netlogon]
;	comment = Network Logon Service
;	path = /var/lib/samba/netlogon
;	guest ok = yes
;	writable = no
;	share modes = no
	
	
# Un-comment the following to provide a specific roving profile share
# the default is to use the user‘s home directory
;	[Profiles]
;	path = /var/lib/samba/profiles
;	browseable = no
;	guest ok = yes
	
	
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;	[public]
;	comment = Public Stuff
;	path = /home/samba
;	public = yes
;	writable = yes
;	printable = no
;	write list = +staff
[samba_share]
	comment = samba server myshare space
	path=/samba_share
	browseable =yes
	writable = yes
	guest ok = yes
	public = yes

版权声明:本文为博主原创文章,未经博主允许不得转载。

samba应用常见问题 和 修改后的smb.conf文件

标签:

原文地址:http://blog.csdn.net/ruanjianruanjianruan/article/details/46954681

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!