码迷,mamicode.com
首页 > 其他好文 > 详细

sysctl命令介绍

时间:2019-01-19 16:17:21      阅读:178      评论:0      收藏:0      [点我收藏+]

标签:ade   out   布尔   prot   ESS   enable   red   包含   director   

命令的作用

sysctl命令被用于在内核运行时动态地修改内核的运行参数,可用的内核参数在目录/proc/sys中。它包含一些TCP/ip堆栈和虚拟内存系统的高级选项, 这可以让有经验的管理员提高引人注目的系统性能。用sysctl可以读取设置超过五百个系统变量。

命令格式

[root@bigdata1 ~]# sysctl 

Usage:
 sysctl [options] [variable[=value] ...]

Options:
  -a, --all            display all variables  #打印当前所有可用的内核参数变量和值
  -A                   alias of -a            #以表格的形式打印当前所有可用的内核参数变量和值
  -X                   alias of -a
      --deprecated     include deprecated parameters to listing
  -b, --binary         print value without new line
  -e, --ignore         ignore unknown variables errors
  -N, --names          print variable names without values
  -n, --values         print only values of a variables
  -p, --load[=<file>]  read values from file
  -f                   alias of -p
      --system         read values from all system directories
  -r, --pattern <expression>
                       select setting that match expression
  -q, --quiet          do not echo variable set
  -w, --write          enable writing a value to variable
  -o                   does nothing
  -x                   does nothing
  -d                   alias of -h

 -h, --help     display this help and exit
 -V, --version  output version information and exit

For more details see sysctl(8).

参数

变量=值:设置内核参数对应的变量值。

实例使用

查看所有可读变量

sysctl -a

读一个指定的变量

sysctl kern.maxproc kern.maxproc:1044

设置一个指定的变量

sysctl kern.maxfiles=5000

可以使用sysctl修改系统变量,也可以通过编辑sysctl.conf文件来修改系统变量。sysctl.conf看起来很像rc.conf。它用variable=value的形式来设定值。指定的值在系统进入多用户模式之后被设定。并不是所有的变量都可以在这个模式下设定。

sysctl变量的设置通常是字符串、数字或者布尔型。(布尔型用 1 来表示‘yes‘,用 0 来表示‘no‘)。

sysctl -w kernel.sysrq=0
sysctl -w kernel.core_uses_pid=1
sysctl -w net.ipv4.conf.default.accept_redirects=0
sysctl -w net.ipv4.conf.default.accept_source_route=0
sysctl -w net.ipv4.conf.default.rp_filter=1
sysctl -w net.ipv4.tcp_syncookies=1
sysctl -w net.ipv4.tcp_max_syn_backlog=2048
sysctl -w net.ipv4.tcp_fin_timeout=30
sysctl -w net.ipv4.tcp_synack_retries=2
sysctl -w net.ipv4.tcp_keepalive_time=3600
sysctl -w net.ipv4.tcp_window_scaling=1
sysctl -w net.ipv4.tcp_sack=1

配置sysctl

使用sysctl的话可能仅仅是临时改变某一个变量的值,如果想要重启之后仍旧生效,请修改/etc/sysctl.conf文件。

如果该文件为空,则输入以下内容,否则请根据情况自己做调整:

# Controls source route verification
# Default should work for all interfaces
net.ipv4.conf.default.rp_filter = 1
# net.ipv4.conf.all.rp_filter = 1
# net.ipv4.conf.lo.rp_filter = 1
# net.ipv4.conf.eth0.rp_filter = 1

# Disables IP source routing
# Default should work for all interfaces
net.ipv4.conf.default.accept_source_route = 0
# net.ipv4.conf.all.accept_source_route = 0
# net.ipv4.conf.lo.accept_source_route = 0
# net.ipv4.conf.eth0.accept_source_route = 0

# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0

# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1

# Increase maximum amount of memory allocated to shm
# Only uncomment if needed!
# kernel.shmmax = 67108864

# Disable ICMP Redirect Acceptance
# Default should work for all interfaces
net.ipv4.conf.default.accept_redirects = 0
# net.ipv4.conf.all.accept_redirects = 0
# net.ipv4.conf.lo.accept_redirects = 0
# net.ipv4.conf.eth0.accept_redirects = 0

# enable Log Spoofed Packets, Source Routed Packets, Redirect Packets
# Default should work for all interfaces
net.ipv4.conf.default.log_martians = 1
# net.ipv4.conf.all.log_martians = 1
# net.ipv4.conf.lo.log_martians = 1
# net.ipv4.conf.eth0.log_martians = 1

# Decrease the time default value for tcp_fin_timeout connection
net.ipv4.tcp_fin_timeout = 25

# Decrease the time default value for tcp_keepalive_time connection
net.ipv4.tcp_keepalive_time = 1200

# Turn on the tcp_window_scaling
net.ipv4.tcp_window_scaling = 1

# Turn on the tcp_sack
net.ipv4.tcp_sack = 1

# tcp_fack should be on because of sack
net.ipv4.tcp_fack = 1

# Turn on the tcp_timestamps
net.ipv4.tcp_timestamps = 1

# Enable TCP SYN Cookie Protection
net.ipv4.tcp_syncookies = 1

# Enable ignoring broadcasts request
net.ipv4.icmp_echo_ignore_broadcasts = 1

# Enable bad error message Protection
net.ipv4.icmp_ignore_bogus_error_responses = 1

# make more local ports available
# net.ipv4.ip_local_port_range = 1024 65000

# set TCP Re-Ordering value in kernel to ‘5′
net.ipv4.tcp_reordering = 5

# Lower syn retry rates
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 3

# Set Max SYN Backlog to ‘2048′
net.ipv4.tcp_max_syn_backlog = 2048

# Various Settings
net.core.netdev_max_backlog = 1024

# Increase the maximum number of skb-heads to be cached
net.core.hot_list_length = 256

# Increase the tcp-time-wait buckets pool size
net.ipv4.tcp_max_tw_buckets = 360000

# This will increase the amount of memory available for socket input/output queues
net.core.rmem_default = 65535
net.core.rmem_max = 8388608
net.ipv4.tcp_rmem = 4096 87380 8388608
net.core.wmem_default = 65535
net.core.wmem_max = 8388608
net.ipv4.tcp_wmem = 4096 65535 8388608
net.ipv4.tcp_mem = 8388608 8388608 8388608
net.core.optmem_max = 40960

如果希望屏蔽别人 ping 你的主机,则加入以下代码:

# Disable ping requests
net.ipv4.icmp_echo_ignore_all = 1

编辑完成之后,请执行以下命令使变动立即生效:

/sbin/sysctl -p
/sbin/sysctl -w net.ipv4.route.flush=1

坚壁清野

sysctl命令介绍

标签:ade   out   布尔   prot   ESS   enable   red   包含   director   

原文地址:https://www.cnblogs.com/hzhiping/p/10291813.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!