Glow 效果材质

// Copyright 1998-2016 Epic Games, Inc. All Rights Reserved.

/**
 * MaterialTemplate.usf: Filled in by FHLSLMaterialTranslator::GetMaterialShaderCode for each material being compiled.
 */

#include "Random.usf"
#include "UniformBuffers/Material.usf"

// for MaterialExpressionDepthOfFieldFunction
#include "DepthOfFieldCommon.usf"
#include "CircleDOFCommon.usf"
#include "GlobalDistanceFieldShared.usf"

#if USES_SPEEDTREE
    #include "SpeedTreeCommon.usf"
#endif

#define NUM_MATERIAL_TEXCOORDS_VERTEX 1
#define NUM_MATERIAL_TEXCOORDS 1

#ifdef MIN_MATERIAL_TEXCOORDS 
    #include "MinMaterialTexCoords.usf"
#endif
 
#if MATERIAL_ATMOSPHERIC_FOG
    #include "AtmosphereCommon.usf"
#endif

#include "PaniniProjection.usf"

#ifndef USE_DITHERED_LOD_TRANSITION
    #if USE_INSTANCING
        #ifndef USE_DITHERED_LOD_TRANSITION_FOR_INSTANCED
            #error "USE_DITHERED_LOD_TRANSITION_FOR_INSTANCED should have been defined"
        #endif
        #define USE_DITHERED_LOD_TRANSITION USE_DITHERED_LOD_TRANSITION_FOR_INSTANCED
    #else
        #ifndef USE_DITHERED_LOD_TRANSITION_FROM_MATERIAL
            #error "USE_DITHERED_LOD_TRANSITION_FROM_MATERIAL should have been defined"
        #endif
        #define USE_DITHERED_LOD_TRANSITION USE_DITHERED_LOD_TRANSITION_FROM_MATERIAL
    #endif
#endif

#ifndef USE_STENCIL_LOD_DITHER
    #define USE_STENCIL_LOD_DITHER    USE_STENCIL_LOD_DITHER_DEFAULT
#endif

//Platforms that don‘t run the editor shouldn‘t need editor features in the shaders.
#define PLATFORM_SUPPORTS_EDITOR_SHADERS (!PS4_PROFILE && !XBOXONE_PROFILE && !ESDEFERRED_PROFILE && !WOLF_PROFILE)

//Tie Editor features to platform support and the COMPILE_SHADERS_FOR_DEVELOPMENT which is set via CVAR.
#define USE_EDITOR_SHADERS (PLATFORM_SUPPORTS_EDITOR_SHADERS && USE_DEVELOPMENT_SHADERS)

//Materials also have to opt in to these features.
#define USE_EDITOR_COMPOSITING (USE_EDITOR_SHADERS && EDITOR_PRIMITIVE_MATERIAL)

#define MATERIALBLENDING_ANY_TRANSLUCENT (MATERIALBLENDING_TRANSLUCENT || MATERIALBLENDING_ADDITIVE || MATERIALBLENDING_MODULATE)

/**
 * Parameters used by vertex and pixel shaders to access particle properties.
 */
struct FMaterialParticleParameters
{
    /** Relative time [0-1]. */
    half RelativeTime;
    /** Fade amount due to motion blur. */
    half MotionBlurFade;
    /** Random value per particle [0-1]. */
    half Random;
    /** XYZ: Direction, W: Speed. */
    half4 Velocity;
    /** Per-particle color. */
    half4 Color;
    /** Particle translated world space position and size(radius). */
    float4 TranslatedWorldPositionAndSize;
    /** Macro UV scale and bias. */
    half4 MacroUV;
    /** Dynamic parameter used by particle systems. */
    half4 DynamicParameter;
    /** mesh particle orientation */
    float4x4 LocalToWorld;

#if USE_PARTICLE_SUBUVS
    /** SubUV texture coordinates*/
    MaterialFloat2 SubUVCoords[2];
    /** SubUV interpolation value*/
    MaterialFloat SubUVLerp;
#endif

    /** The size of the particle. */
    float2 Size;
};

float4 GetDynamicParameter(FMaterialParticleParameters Parameters, float4 Default)
{
    #if PARTICLE_FACTORY
    return Parameters.DynamicParameter;
    #else
    return Default;
    #endif
}

/** 
 * Parameters calculated from the pixel material inputs.
 */
struct FPixelMaterialInputs
{
    MaterialFloat3 EmissiveColor;
    MaterialFloat Opacity;
    MaterialFloat OpacityMask;
    MaterialFloat3 BaseColor;
    MaterialFloat Metallic;
    MaterialFloat Specular;
    MaterialFloat Roughness;
    MaterialFloat3 Normal;
    MaterialFloat AmbientOcclusion;
    MaterialFloat2 Refraction;
    MaterialFloat PixelDepthOffset;

};

/** 
 * Parameters needed by pixel shader material inputs, related to Geometry.
 * These are independent of vertex factory.
 */
struct FMaterialPixelParameters
{
#if NUM_MATERIAL_TEXCOORDS
    float2 TexCoords[NUM_MATERIAL_TEXCOORDS];
#endif

    /** Interpolated vertex color, in linear color space. */
    half4 VertexColor;

    /** Normalized tangent space normal. */
    half3 TangentNormal;

    /** Normalized world space normal. */
    half3 WorldNormal;

    /** Normalized world space reflected camera vector. */
    half3 ReflectionVector;

    /** Normalized world space camera vector, which is the vector from the point being shaded to the camera position. */
    half3 CameraVector;

    /** World space light vector, only valid when rendering a light function. */
    half3 LightVector;

    /**
     * Like SV_Position (.xy is pixel position at pixel center, z:DeviceZ, .w:SceneDepth)
     * using shader generated value SV_POSITION
     * Warning: unlike SV_Position, this is not relative to the current viewport.  SV_Position = MaterialParameters.SvPosition.xy - View.ViewRectMin.xy;
     */
    float4 SvPosition;
        
    /** Post projection position reconstructed from SvPosition, before the divide by W. left..top -1..1, bottom..top -1..1  within the viewport, W is the SceneDepth */
    float4 ScreenPosition;

    half UnMirrored;

    half TwoSidedSign;

    /**
     * Orthonormal rotation-only transform from tangent space to world space
     * The transpose(TangentToWorld) is WorldToTangent, and TangentToWorld[2] is WorldVertexNormal
     */
    half3x3 TangentToWorld;

    /** 
     * Interpolated worldspace position of this pixel
     * todo: Make this TranslatedWorldPosition and also rename the VS/DS/HS WorldPosition to be TranslatedWorldPosition
     */
    float3 AbsoluteWorldPosition;

    /** 
     * Interpolated worldspace position of this pixel, centered around the camera
     */
    float3 WorldPosition_CamRelative;

    /** 
     * Interpolated worldspace position of this pixel, not including any world position offset or displacement.
     * Only valid if shader is compiled with NEEDS_WORLD_POSITION_EXCLUDING_SHADER_OFFSETS, otherwise just contains 0
     */
    float3 WorldPosition_NoOffsets;

    /** 
     * Interpolated worldspace position of this pixel, not including any world position offset or displacement.
     * Only valid if shader is compiled with NEEDS_WORLD_POSITION_EXCLUDING_SHADER_OFFSETS, otherwise just contains 0
     */
    float3 WorldPosition_NoOffsets_CamRelative;

    /** Offset applied to the lighting position for translucency, used to break up aliasing artifacts. */
    half3 LightingPositionOffset;

    float AOMaterialMask;

#if LIGHTMAP_UV_ACCESS
    float2    LightmapUVs;
#endif

#if USE_INSTANCING
    half4 PerInstanceParams;
#endif

    /** Per-particle properties. Only valid for particle vertex factories. */
    FMaterialParticleParameters Particle;

#if (ES2_PROFILE || ES3_1_PROFILE)
    float4 LayerWeights;
#endif

#if TEX_COORD_SCALE_ANALYSIS
    /** Parameters used by the MaterialTexCoordScales shader. */
    FTexCoordScalesParams TexCoordScalesParams;
#endif

#if POST_PROCESS_MATERIAL && (FEATURE_LEVEL <= FEATURE_LEVEL_ES3_1)
    /** Used in mobile custom pp material to preserve original SceneColor Alpha */
    half BackupSceneColorAlpha;
#endif
};

// @todo compat hack
FMaterialPixelParameters MakeInitializedMaterialPixelParameters()
{
    FMaterialPixelParameters MPP;
    MPP = (FMaterialPixelParameters)0;
    MPP.TangentToWorld = float3x3(1,0,0,0,1,0,0,0,1);
    return MPP;
}

/** 
 * Parameters needed by domain shader material inputs.
 * These are independent of vertex factory.
 */
struct FMaterialTessellationParameters
{
    // Note: Customized UVs are only evaluated in the vertex shader, which is not really what you want with tessellation, but keeps the code simpler 
    // (tessellation texcoords are the same as pixels shader texcoords)
#if NUM_MATERIAL_TEXCOORDS
    float2 TexCoords[NUM_MATERIAL_TEXCOORDS];
#endif
    float4 VertexColor;
    // TODO: Non translated world position
    float3 WorldPosition;
    float3 TangentToWorldPreScale;

    // TangentToWorld[2] is WorldVertexNormal, [0] and [1] are binormal and tangent
    float3x3 TangentToWorld;
};

/** 
 * Parameters needed by vertex shader material inputs.
 * These are independent of vertex factory.
 */
struct FMaterialVertexParameters
{
    // Position in the translated world (VertexFactoryGetWorldPosition).
    // Previous position in the translated world (VertexFactoryGetPreviousWorldPosition) if
    //    computing material‘s output for previous frame (See {BasePassVertex,Velocity}Shader.usf).
    float3 WorldPosition;
    // TangentToWorld[2] is WorldVertexNormal
    half3x3 TangentToWorld;
#if USE_INSTANCING
    /** Per-instance properties. */
    float4x4 InstanceLocalToWorld;
    float3 InstanceLocalPosition;
    float4 PerInstanceParams;
#elif PARTICLE_MESH_FACTORY
    /** Per-particle properties. */
    float4x4 InstanceLocalToWorld;
#endif
    float3 PreSkinnedPosition;

    half4 VertexColor;
#if NUM_MATERIAL_TEXCOORDS_VERTEX
    float2 TexCoords[NUM_MATERIAL_TEXCOORDS_VERTEX];
    #if (ES2_PROFILE || ES3_1_PROFILE)
    float2 TexCoordOffset; // Offset for UV localization for large UV values
    #endif
#endif

    /** Per-particle properties. Only valid for particle vertex factories. */
    FMaterialParticleParameters Particle;
};

float3 GetTranslatedWorldPosition(FMaterialVertexParameters Parameters)
{
    return Parameters.WorldPosition;
}

float3 GetPrevTranslatedWorldPosition(FMaterialVertexParameters Parameters)
{
    // Previous world position and current world position are sharing the
    // same attribute in Parameters, because in BasePassVertexShader.usf
    // and in VelocityShader.usf, we are regenerating a Parameters from
    // VertexFactoryGetPreviousWorldPosition() instead of
    // VertexFactoryGetWorldPosition().
    return GetTranslatedWorldPosition(Parameters);
}

float3 GetWorldPosition(FMaterialVertexParameters Parameters)
{
    return GetTranslatedWorldPosition(Parameters) - ResolvedView.PreViewTranslation;
}

float3 GetPrevWorldPosition(FMaterialVertexParameters Parameters)
{
    return GetPrevTranslatedWorldPosition(Parameters) - ResolvedView.PrevPreViewTranslation;
}

//TODO(bug UE-17131): We should compute world displacement for the previous frame
float3 GetWorldPosition(FMaterialTessellationParameters Parameters)
{
    return Parameters.WorldPosition;
}

float3 GetTranslatedWorldPosition(FMaterialTessellationParameters Parameters)
{
    return Parameters.WorldPosition + ResolvedView.PreViewTranslation;
}

float3 GetWorldPosition(FMaterialPixelParameters Parameters)
{
    return Parameters.AbsoluteWorldPosition;
}

float3 GetWorldPosition_NoMaterialOffsets(FMaterialPixelParameters Parameters)
{
    return Parameters.WorldPosition_NoOffsets;
}

float3 GetTranslatedWorldPosition(FMaterialPixelParameters Parameters)
{
    return Parameters.WorldPosition_CamRelative;
}

float3 GetTranslatedWorldPosition_NoMaterialOffsets(FMaterialPixelParameters Parameters)
{
    return Parameters.WorldPosition_NoOffsets_CamRelative;
}

// using this function allows to write the same code for VS and PS
float4 GetScreenPosition(FMaterialVertexParameters Parameters)
{
    return mul(float4(Parameters.WorldPosition, 1.0f), ResolvedView.TranslatedWorldToClip);
}

// using this function allows to write the same code for VS and PS
float4 GetScreenPosition(FMaterialPixelParameters Parameters)
{
    return Parameters.ScreenPosition;
}

#if DEFERRED_DECAL && NUM_MATERIAL_TEXCOORDS
    /*
     * Material node DecalMipmapLevel‘s code designed to avoid the 2x2 pixels artefacts on the edges around where the decal
     * is projected to. The technique is fetched from (http://www.humus.name/index.php?page=3D&ID=84).
     *
     * The problem around edges of the meshes, is that the hardware computes the mipmap level according to ddx(uv) and ddy(uv),
     * but since the pixel shader are invocated by group of 2x2 pixels, then on edges some pixel might be getting the
     * current depth of an differet mesh that the other pixel of the same groups. If this mesh is very far from the other
     * mesh of the same group of pixel, then one of the delta might be very big, leading to choosing a low mipmap level for this
     * group of 4 pixels, causing the artefacts.
     */
    float2 ComputeDecalUVFromSvPosition(float4 SvPosition)
    {
        half DeviceZ = LookupDeviceZ(SvPositionToBufferUV(SvPosition));

        SvPosition.z = DeviceZ;

        float4 DecalVector = mul(float4(SvPosition.xyz,1), SvPositionToDecal);
        DecalVector.xyz /= DecalVector.w;
        DecalVector = DecalVector * 0.5f + 0.5f;
        DecalVector.xyz = DecalVector.zyx;
        return DecalVector.xy;
    }

    float2 ComputeDecalDDX(FMaterialPixelParameters Parameters)
    {
        /*
         * Assuming where in a pixel shader invocation, then we compute manualy compute two d(uv)/d(x)
         * with the pixels‘s left and right neighbours.
         */
        float4 ScreenDeltaX = float4(1, 0, 0, 0);
        float2 UvDiffX0 = Parameters.TexCoords[0] - ComputeDecalUVFromSvPosition(Parameters.SvPosition - ScreenDeltaX);
        float2 UvDiffX1 = ComputeDecalUVFromSvPosition(Parameters.SvPosition + ScreenDeltaX) - Parameters.TexCoords[0];

        /*
         * So we have two diff on the X axis, we want the one that has the smallest length
         * to avoid the 2x2 pixels mipmap artefacts on the edges. 
         */
        return dot(UvDiffX0, UvDiffX0) < dot(UvDiffX1, UvDiffX1) ? UvDiffX0 : UvDiffX1;
    }

    float2 ComputeDecalDDY(FMaterialPixelParameters Parameters)
    {
        // do same for the Y axis
        float4 ScreenDeltaY = float4(0, 1, 0, 0);
        float2 UvDiffY0 = Parameters.TexCoords[0] - ComputeDecalUVFromSvPosition(Parameters.SvPosition - ScreenDeltaY);
        float2 UvDiffY1 = ComputeDecalUVFromSvPosition(Parameters.SvPosition + ScreenDeltaY) - Parameters.TexCoords[0];

        return dot(UvDiffY0, UvDiffY0) < dot(UvDiffY1, UvDiffY1) ? UvDiffY0 : UvDiffY1;
    }

    float ComputeDecalMipmapLevel(FMaterialPixelParameters Parameters, float2 TextureSize)
    {
        float2 UvPixelDiffX = ComputeDecalDDX(Parameters) * TextureSize;
        float2 UvPixelDiffY = ComputeDecalDDY(Parameters) * TextureSize;

        // Computes the mipmap level
        float MaxDiff = max(dot(UvPixelDiffX, UvPixelDiffX), dot(UvPixelDiffY, UvPixelDiffY));
        return 0.5 * log2(MaxDiff);
    }
#else // DEFERRED_DECAL && NUM_MATERIAL_TEXCOORDS
    float2 ComputeDecalDDX(FMaterialPixelParameters Parameters)
    {
        return 0.0f;
    }
    
    float2 ComputeDecalDDY(FMaterialPixelParameters Parameters)
    {
        return 0.0f;
    }

    float ComputeDecalMipmapLevel(FMaterialPixelParameters Parameters, float2 TextureSize)
    {
        return 0.0f;
    }
#endif // DEFERRED_DECAL && NUM_MATERIAL_TEXCOORDS

#if DEFERRED_DECAL
    /*
     * Deferred decal don‘t have a Primitive uniform buffer, because we don‘t know on which primitive the decal
     * is being projected to. But the user may still need to get the decal‘s actor world position.
     * So instead of setting up a primitive buffer that may cost to much CPU effort to be almost never used,
     * we directly fetch this value from the DeferredDecal.usf specific uniform variable DecalToWorld.
     */
    float3 GetActorWorldPosition()
    {
        return DecalToWorld[3].xyz;
    }
#else
    float3 GetActorWorldPosition()
    {
        return Primitive.ActorWorldPosition;
    }
#endif // DEFERRED_DECAL

#if DECAL_PRIMITIVE
    float DecalLifetimeOpacity()
    {
        return DecalParams.y;
    }
#else
    float DecalLifetimeOpacity()
    {
        return 0.0f;
    }
#endif // DECAL_PRIMITIVE

/** Transforms a vector from tangent space to world space, prescaling by an amount calculated previously */
MaterialFloat3 TransformTangentVectorToWorld_PreScaled(FMaterialTessellationParameters Parameters, MaterialFloat3 InTangentVector)
{
#if FEATURE_LEVEL >= FEATURE_LEVEL_SM5 
    // used optionally to scale up the vector prior to conversion
    InTangentVector *= abs( Parameters.TangentToWorldPreScale );    

    // Transform directly to world space
    // The vector transform is optimized for this case, only one vector-matrix multiply is needed
    return mul(InTangentVector, Parameters.TangentToWorld);
#else
    return TransformTangentVectorToWorld(Parameters.TangentToWorld, InTangentVector);
#endif // #if FEATURE_LEVEL_SM5
}

/** Transforms a vector from tangent space to view space */
MaterialFloat3 TransformTangentVectorToView(FMaterialPixelParameters Parameters, MaterialFloat3 InTangentVector)
{
    // Transform from tangent to world, and then to view space
    return mul(mul(InTangentVector, Parameters.TangentToWorld), (MaterialFloat3x3)ResolvedView.TranslatedWorldToView);
}

/** Transforms a vector from local space to world space (VS version) */
MaterialFloat3 TransformLocalVectorToWorld(FMaterialVertexParameters Parameters,MaterialFloat3 InLocalVector)
{
    #if USE_INSTANCING || PARTICLE_MESH_FACTORY
        return mul(InLocalVector, (MaterialFloat3x3)Parameters.InstanceLocalToWorld);
    #else
        return mul(InLocalVector, GetLocalToWorld3x3());
    #endif
}

/** Transforms a vector from local space to world space (PS version) */
MaterialFloat3 TransformLocalVectorToWorld(FMaterialPixelParameters Parameters,MaterialFloat3 InLocalVector)
{
    return mul(InLocalVector, GetLocalToWorld3x3());
}

#if HAS_PRIMITIVE_UNIFORM_BUFFER

/** Transforms a vector from world space to local space */
MaterialFloat3 TransformWorldVectorToLocal(MaterialFloat3 InWorldVector)
{
    return mul(InWorldVector, (MaterialFloat3x3)Primitive.WorldToLocal);
}

/** Transforms a position from local space to absolute world space */
float3 TransformLocalPositionToWorld(FMaterialPixelParameters Parameters,float3 InLocalPosition)
{
    return mul(float4(InLocalPosition, 1), Primitive.LocalToWorld).xyz;
}

/** Transforms a position from local space to absolute world space */
float3 TransformLocalPositionToWorld(FMaterialVertexParameters Parameters,float3 InLocalPosition)
{
    #if USE_INSTANCING || PARTICLE_MESH_FACTORY
        return mul(float4(InLocalPosition, 1), Parameters.InstanceLocalToWorld).xyz;
    #else
        return mul(float4(InLocalPosition, 1), Primitive.LocalToWorld).xyz;
    #endif
}

#endif

#if HAS_PRIMITIVE_UNIFORM_BUFFER

/** Return the object‘s position in world space */
float3 GetObjectWorldPosition(FMaterialPixelParameters Parameters)
{
    return Primitive.ObjectWorldPositionAndRadius.xyz;
}

float3 GetObjectWorldPosition(FMaterialTessellationParameters Parameters)
{
    return Primitive.ObjectWorldPositionAndRadius.xyz;
}

/** Return the object‘s position in world space. For instanced meshes, this returns the instance position. */
float3 GetObjectWorldPosition(FMaterialVertexParameters Parameters)
{
    #if USE_INSTANCING || PARTICLE_MESH_FACTORY
        return Parameters.InstanceLocalToWorld[3].xyz;
    #else
        return Primitive.ObjectWorldPositionAndRadius.xyz;
    #endif
}

#endif

/** Get the per-instance random value when instancing */
float GetPerInstanceRandom(FMaterialVertexParameters Parameters)
{
#if USE_INSTANCING
    return Parameters.PerInstanceParams.x;
#else
    return 0.0;
#endif
}

/** Get the per-instance random value when instancing */
float GetPerInstanceRandom(FMaterialPixelParameters Parameters)
{
#if USE_INSTANCING
    return Parameters.PerInstanceParams.x;
#else
    return 0.0;
#endif
}

/** Get the per-instance fade-out amount when instancing */
float GetPerInstanceFadeAmount(FMaterialPixelParameters Parameters)
{
#if USE_INSTANCING
    return float(Parameters.PerInstanceParams.y);
#else
    return float(1.0);
#endif
}

/** Get the per-instance fade-out amount when instancing */
float GetPerInstanceFadeAmount(FMaterialVertexParameters Parameters)
{
#if USE_INSTANCING
    return float(Parameters.PerInstanceParams.y);
#else
    return float(1.0);
#endif
}
 
MaterialFloat GetDistanceCullFade()
{
    return saturate( View.RealTime * PrimitiveFade.FadeTimeScaleBias.x + PrimitiveFade.FadeTimeScaleBias.y );
}

/** Rotates Position about the given axis by the given angle, in radians, and returns the offset to Position. */
float3 RotateAboutAxis(float4 NormalizedRotationAxisAndAngle, float3 PositionOnAxis, float3 Position)
{
    // Project Position onto the rotation axis and find the closest point on the axis to Position
    float3 ClosestPointOnAxis = PositionOnAxis + NormalizedRotationAxisAndAngle.xyz * dot(NormalizedRotationAxisAndAngle.xyz, Position - PositionOnAxis);
    // Construct orthogonal axes in the plane of the rotation
    float3 UAxis = Position - ClosestPointOnAxis;
    float3 VAxis = cross(NormalizedRotationAxisAndAngle.xyz, UAxis);
    float CosAngle;
    float SinAngle;
    sincos(NormalizedRotationAxisAndAngle.w, SinAngle, CosAngle);
    // Rotate using the orthogonal axes
    float3 R = UAxis * CosAngle + VAxis * SinAngle;
    // Reconstruct the rotated world space position
    float3 RotatedPosition = ClosestPointOnAxis + R;
    // Convert from position to a position offset
    return RotatedPosition - Position;
}

// Material Expression function
float MaterialExpressionDepthOfFieldFunction(float SceneDepth, int FunctionValueIndex)
{
    // tryed switch() but seems that doesn‘t work

    if(FunctionValueIndex == 0) // TDOF_NearAndFarMask
    {
        return CalcUnfocusedPercentCustomBound(SceneDepth, 1, 1);
    }
    else if(FunctionValueIndex == 1) // TDOF_Near
    {
        return CalcUnfocusedPercentCustomBound(SceneDepth, 1, 0);
    }
    else if(FunctionValueIndex == 2) // TDOF_Far
    {
        return CalcUnfocusedPercentCustomBound(SceneDepth, 0, 1);
    }
    else if(FunctionValueIndex == 3) // TDOF_CircleOfConfusionRadius
    {
        // * 2 to compensate for half res
        return DepthToCoc(SceneDepth) * 2.0f;
    }
    return 0;
}

// TODO convert to LUT
float3 MaterialExpressionBlackBody( float Temp )
{
    float u = ( 0.860117757f + 1.54118254e-4f * Temp + 1.28641212e-7f * Temp*Temp ) / ( 1.0f + 8.42420235e-4f * Temp + 7.08145163e-7f * Temp*Temp );
    float v = ( 0.317398726f + 4.22806245e-5f * Temp + 4.20481691e-8f * Temp*Temp ) / ( 1.0f - 2.89741816e-5f * Temp + 1.61456053e-7f * Temp*Temp );

    float x = 3*u / ( 2*u - 8*v + 4 );
    float y = 2*v / ( 2*u - 8*v + 4 );
    float z = 1 - x - y;

    float Y = 1;
    float X = Y/y * x;
    float Z = Y/y * z;

    float3x3 XYZtoRGB =
    {
         3.2404542, -1.5371385, -0.4985314,
        -0.9692660,  1.8760108,  0.0415560,
         0.0556434, -0.2040259,  1.0572252,
    };

    return mul( XYZtoRGB, float3( X, Y, Z ) ) * pow( 0.0004 * Temp, 4 );
}

float4 MaterialExpressionAtmosphericFog(FMaterialPixelParameters Parameters, float3 AbsoluteWorldPosition)
{
#if MATERIAL_ATMOSPHERIC_FOG
    // WorldPosition default value is Parameters.AbsoluteWorldPosition if not overridden by the user
    float3 ViewVector = AbsoluteWorldPosition - ResolvedView.WorldCameraOrigin;
    float SceneDepth = length(ViewVector);
    return GetAtmosphericFog(ResolvedView.WorldCameraOrigin, ViewVector, SceneDepth, float3(0.f, 0.f, 0.f));
#else
    return float4(0.f, 0.f, 0.f, 0.f);
#endif
}

float3 MaterialExpressionAtmosphericLightVector(FMaterialPixelParameters Parameters)
{
#if MATERIAL_ATMOSPHERIC_FOG
    return View.AtmosphericFogSunDirection;
#else
    return float3(0.f, 0.f, 0.f);
#endif
}

float3 MaterialExpressionAtmosphericLightColor(FMaterialPixelParameters Parameters)
{
#if MATERIAL_ATMOSPHERIC_FOG
    return View.AtmosphericFogSunColor;
#else
    return float3(0.f, 0.f, 0.f);
#endif
}

/**
 * Utility function to unmirror one coordinate value to the other side
 * UnMirrored == 1 if normal
 * UnMirrored == -1 if mirrored
 *
 * Used by most of parameter functions generated via code in this file
 */
MaterialFloat UnMirror( MaterialFloat Coordinate, FMaterialPixelParameters Parameters )
{
    return ((Coordinate)*(Parameters.UnMirrored)*0.5+0.5);
}

/**
 * UnMirror only U
 */
MaterialFloat2 UnMirrorU( MaterialFloat2 UV, FMaterialPixelParameters Parameters )
{
    return MaterialFloat2(UnMirror(UV.x, Parameters), UV.y);
}

/**
 * UnMirror only V
 */
MaterialFloat2 UnMirrorV( MaterialFloat2 UV, FMaterialPixelParameters Parameters )
{
    return MaterialFloat2(UV.x, UnMirror(UV.y, Parameters));
}

/**
 * UnMirror only UV
 */
MaterialFloat2 UnMirrorUV( MaterialFloat2 UV, FMaterialPixelParameters Parameters )
{
    return MaterialFloat2(UnMirror(UV.x, Parameters), UnMirror(UV.y, Parameters));
}

/** 
 * Transforms screen space positions into UVs with [.5, .5] centered on ObjectPostProjectionPosition,
 * And [1, 1] at ObjectPostProjectionPosition + (ObjectRadius, ObjectRadius).
 */
MaterialFloat2 GetParticleMacroUV(FMaterialPixelParameters Parameters)
{
    return (Parameters.ScreenPosition.xy / Parameters.ScreenPosition.w - Parameters.Particle.MacroUV.xy) * Parameters.Particle.MacroUV.zw + MaterialFloat2(.5, .5);
}

#ifndef MOBILE_EMULATION
#define MOBILE_EMULATION ((FEATURE_LEVEL == FEATURE_LEVEL_ES2 || FEATURE_LEVEL == FEATURE_LEVEL_ES3_1) && (!(COMPILER_GLSL_ES2||COMPILER_GLSL_ES3_1) && USE_DEVELOPMENT_SHADERS && (COMPILER_METAL && MAC)))
#endif

MaterialFloat4 ProcessMaterialColorTextureLookup(MaterialFloat4 TextureValue)
{
#if (ES2_PROFILE || ES3_1_PROFILE)
    #if MOBILE_EMULATION
    if( View.MobilePreviewMode > 0.5f)
    {
        // undo HW srgb->lin
        TextureValue.rgb = pow(TextureValue.rgb, 1.0f / 2.2f); // TODO: replace with a more accurate lin -> sRGB conversion.
    }
    #endif

    // sRGB read approximation
    TextureValue.rgb *= TextureValue.rgb;
#endif 
    return TextureValue;
}

MaterialFloat4 ProcessMaterialLinearColorTextureLookup(MaterialFloat4 TextureValue)
{
    return TextureValue;
}

MaterialFloat ProcessMaterialGreyscaleTextureLookup(MaterialFloat TextureValue)
{
#if (ES2_PROFILE || ES3_1_PROFILE)
    #if MOBILE_EMULATION
    if( View.MobilePreviewMode > 0.5f )
    {
        // undo HW srgb->lin
        TextureValue = pow(TextureValue, 1.0f/2.2f); // TODO: replace with a more accurate lin -> sRGB conversion.
    }
    #endif
    // sRGB read approximation
    TextureValue *= TextureValue;
#endif 
    return TextureValue;
}

MaterialFloat ProcessMaterialLinearGreyscaleTextureLookup(MaterialFloat TextureValue)
{
    return TextureValue;
}

/** Accesses a shared material sampler or falls back if independent samplers are not supported. */
SamplerState GetMaterialSharedSampler(SamplerState TextureSampler, SamplerState SharedSampler)
{
#if SUPPORTS_INDEPENDENT_SAMPLERS
    return SharedSampler;
#else
    // Note: to match behavior on platforms that don‘t support SUPPORTS_INDEPENDENT_SAMPLERS, 
    // TextureSampler should have been set to the same sampler.  This is not currently done.
    return TextureSampler;
#endif
}

/** Calculate a reflection vector about the specified world space normal. Optionally normalize this normal **/
MaterialFloat3 ReflectionAboutCustomWorldNormal(FMaterialPixelParameters Parameters, MaterialFloat3 WorldNormal, bool bNormalizeInputNormal)
{
    if (bNormalizeInputNormal)
    {
        WorldNormal = normalize(WorldNormal);
    }

    return -Parameters.CameraVector + WorldNormal * dot(WorldNormal, Parameters.CameraVector) * 2.0;
}

#ifndef SPHERICAL_OPACITY_FOR_SHADOW_DEPTHS
#define SPHERICAL_OPACITY_FOR_SHADOW_DEPTHS 0
#endif

/** 
 * Calculates opacity for a billboard particle as if it were a sphere. 
 * Note: Calling this function requires the vertex factory to have been compiled with SPHERICAL_PARTICLE_OPACITY set to 1
 */
float GetSphericalParticleOpacity(FMaterialPixelParameters Parameters, float Density)
{
    float Opacity = 0;

#if PARTICLE_FACTORY || HAS_PRIMITIVE_UNIFORM_BUFFER

#if PARTICLE_FACTORY

    float3 ParticleTranslatedWorldPosition = Parameters.Particle.TranslatedWorldPositionAndSize.xyz;
    float ParticleRadius = max(0.000001f, Parameters.Particle.TranslatedWorldPositionAndSize.w);

#elif HAS_PRIMITIVE_UNIFORM_BUFFER

    // Substitute object attributes if the mesh is not a particle
    // This is mostly useful for previewing materials using spherical opacity in the material editor
    float3 ParticleTranslatedWorldPosition = Primitive.ObjectWorldPositionAndRadius.xyz + ResolvedView.PreViewTranslation.xyz;
    float ParticleRadius = max(0.000001f, Primitive.ObjectWorldPositionAndRadius.w);

#endif

    // Rescale density to make the final opacity independent of the particle radius
    float RescaledDensity = Density / ParticleRadius;

    // Distance from point being shaded to particle center
    float DistanceToParticle = length(Parameters.WorldPosition_NoOffsets_CamRelative - ParticleTranslatedWorldPosition);

    FLATTEN
    if (DistanceToParticle < ParticleRadius) 
    {
        // Distance from point being shaded to the point on the sphere along the view direction
        float HemisphericalDistance = sqrt(ParticleRadius * ParticleRadius - DistanceToParticle * DistanceToParticle);

#if SPHERICAL_OPACITY_FOR_SHADOW_DEPTHS
        // When rendering shadow depths we can‘t use scene depth or the near plane, just use the distance through the whole sphere
        float DistanceThroughSphere = HemisphericalDistance * 2;
#else
        // Initialize near and far sphere intersection distances
        float NearDistance = Parameters.ScreenPosition.w - HemisphericalDistance;
        float FarDistance = Parameters.ScreenPosition.w + HemisphericalDistance;

        float SceneDepth = CalcSceneDepth(SvPositionToBufferUV(Parameters.SvPosition));
        FarDistance = min(SceneDepth, FarDistance);

        // Take into account opaque objects intersecting the sphere
        float DistanceThroughSphere = FarDistance - NearDistance;
#endif

        // Use the approximation for the extinction line integral from "Spherical Billboards and their Application to Rendering Explosions"
        Opacity = saturate(1 - exp2(-RescaledDensity * (1 - DistanceToParticle / ParticleRadius) * DistanceThroughSphere));

#if !SPHERICAL_OPACITY_FOR_SHADOW_DEPTHS
        // Fade out as the particle approaches the near plane
        Opacity = lerp(0, Opacity, saturate((Parameters.ScreenPosition.w - ParticleRadius - View.NearPlane) / ParticleRadius));
#endif
    }

#endif

    return Opacity;
}

#if USES_SPEEDTREE

/** Vertex offset for SpeedTree wind and LOD */
float3 GetSpeedTreeVertexOffsetInner(FMaterialVertexParameters Parameters, int GeometryType, int WindType, int LODType, float BillboardThreshold, FSpeedTreeData STData) 
{
    #if (NUM_MATERIAL_TEXCOORDS_VERTEX < 6) || PARTICLE_MESH_FACTORY
        return float4(0,0,0);
    #endif

    #if USE_INSTANCING
        float3x3 LocalToWorld = (float3x3)Parameters.InstanceLocalToWorld;
        float3 LocalPosition = Parameters.InstanceLocalPosition;

        // skip if this instance is hidden
        if (Parameters.PerInstanceParams.z < 1.f)
        {
            return float3(0,0,0);
        }
    #else
        float3x3 LocalToWorld = (float3x3)Primitive.LocalToWorld;
        float3 LocalPosition = mul(float4(GetWorldPosition(Parameters), 1), Primitive.WorldToLocal).xyz;
    #endif

    float3 TreePos = GetObjectWorldPosition(Parameters);

    // compute LOD by finding screen space size
    float LodInterp = 1.0;
#if !USE_INSTANCING || !USE_DITHERED_LOD_TRANSITION
    if (LODType == SPEEDTREE_LOD_TYPE_SMOOTH) 
    {
        const float ScreenMultiple = 0.5 * max(View.ViewSizeAndInvSize.x * ResolvedView.ViewToClip[0][0],
                                                View.ViewSizeAndInvSize.y * ResolvedView.ViewToClip[1][1]);
        const float ScreenRadius = ScreenMultiple * Primitive.ObjectWorldPositionAndRadius.w / 
                                    max(1.0, dot(TreePos - ResolvedView.WorldCameraOrigin, ResolvedView.ViewForward.xyz));
        const float ScreenArea = PI * ScreenRadius * ScreenRadius * View.ViewSizeAndInvSize.z * View.ViewSizeAndInvSize.w;
        LodInterp = saturate((ScreenArea - SpeedTreeLODInfo.x) / SpeedTreeLODInfo.z);
    }
#endif
    TreePos *= 0.001; // The only other use of the tree position is as an offset into trig functions, but big numbers don‘t play nice there

    // SpeedTrees should only be uniformly scaled, but if necessary, it takes a few more instructions
    float TreeScale = length(mul(float3(0,0,1), LocalToWorld));
                    //float3(length((float3)LocalToWorld[0]),
                    //        length((float3)LocalToWorld[1]),
                    //        length((float3)LocalToWorld[2]));


    // @todo There is probably a more optimal way to get the rotated (but not translated or scaled) vertex position needed for correct wind
    float3 OriginalPosition = LocalPosition;
    OriginalPosition = mul(OriginalPosition, LocalToWorld) / TreeScale;

    float3 FinalPosition = OriginalPosition;
    
    if (GeometryType == SPEEDTREE_GEOMETRY_TYPE_BILLBOARD)
    {
        if (BillboardThreshold < 1.0)
        {
            // billboard meshes can have triangles drop out if they aren‘t facing the camera
            // this rotates the view direction around so we ignore the local Z component
            float3 LocalView2D = normalize(float3(ResolvedView.ViewForward.xy, 0));
            float3 LocalNormal2D = normalize(float3(Parameters.TangentToWorld[2].xy, 0));
            if (dot(LocalView2D, LocalNormal2D) > (-1.0 + BillboardThreshold * 0.25))
            {
                FinalPosition = float3(0,0,0);
            }
        }
    }
    else
    {
        // rotated normal needed in a few places
        float3 Normal = Parameters.TangentToWorld[2];

        // branches and fronds
        if (GeometryType == SPEEDTREE_GEOMETRY_TYPE_BRANCH || GeometryType == SPEEDTREE_GEOMETRY_TYPE_FROND) 
        {
            // smooth LOD
            #if !USE_INSTANCING
                if (LODType == SPEEDTREE_LOD_TYPE_SMOOTH) 
                {
                    float3 LODPos = float3(Parameters.TexCoords[3].x, Parameters.TexCoords[3].y, Parameters.TexCoords[4].x);
                    LODPos = mul(LODPos, LocalToWorld) / TreeScale;
                    FinalPosition = lerp(LODPos, FinalPosition, LodInterp);
                }
            #endif

            // frond wind, if needed
            if (GeometryType == SPEEDTREE_GEOMETRY_TYPE_FROND && WindType == SPEEDTREE_WIND_TYPE_PALM)
            {
                float2 TexCoords = Parameters.TexCoords[0];
                float4 WindExtra = float4(Parameters.TexCoords[5].x, Parameters.TexCoords[5].y, Parameters.TexCoords[6].x, 0.0);
                FinalPosition = RippleFrond(STData, FinalPosition, Normal, TexCoords.x, TexCoords.y, WindExtra.x, WindExtra.y, WindExtra.z);
            }
        }

        // leaves and facing leaves
        if (GeometryType == SPEEDTREE_GEOMETRY_TYPE_FACINGLEAF || 
                (GeometryType == SPEEDTREE_GEOMETRY_TYPE_LEAF && 
                (LODType == SPEEDTREE_LOD_TYPE_SMOOTH || (WindType > SPEEDTREE_WIND_TYPE_FASTEST && WindType != SPEEDTREE_WIND_TYPE_PALM))))
        {
            // remove anchor pos from vertex position
            float3 Anchor = float3(Parameters.TexCoords[4].y, Parameters.TexCoords[5].x, Parameters.TexCoords[5].y);
            Anchor = (mul(Anchor, LocalToWorld)) / TreeScale;
            FinalPosition -= Anchor;

            // smooth LOD
            #if !USE_INSTANCING
                if (LODType == SPEEDTREE_LOD_TYPE_SMOOTH) 
                {
                    if (GeometryType == SPEEDTREE_GEOMETRY_TYPE_LEAF)
                    {
                        float3 LODPos = float3(Parameters.TexCoords[3].x, Parameters.TexCoords[3].y, Parameters.TexCoords[4].x);
                        LODPos = mul(LODPos, LocalToWorld) / TreeScale - Anchor;
                        FinalPosition = lerp(LODPos, FinalPosition, LodInterp);
                    }
                    else
                    {
                        float LODScalar = Parameters.TexCoords[3].x;
                        FinalPosition *= lerp(LODScalar, 1.0, LodInterp);
                    }
                }
            #endif

            // face camera-facing leaves to the camera, if needed
            if (GeometryType == SPEEDTREE_GEOMETRY_TYPE_FACINGLEAF) 
            {
                // have to rotate the view into local space
                FinalPosition = FinalPosition.x * ResolvedView.ViewRight + 
                                FinalPosition.y * ResolvedView.ViewUp + 
                                FinalPosition.z * ResolvedView.ViewForward;
            }

            // leaf wind
            if (WindType > SPEEDTREE_WIND_TYPE_FASTEST && WindType != SPEEDTREE_WIND_TYPE_PALM) 
            {
                float4 WindExtra = float4(Parameters.TexCoords[6].x, Parameters.TexCoords[6].y, Parameters.TexCoords[7].x, Parameters.TexCoords[7].y);
                float LeafWindTrigOffset = Anchor.x + Anchor.y;
                FinalPosition = LeafWind(STData, WindExtra.w > 0.0, FinalPosition, Normal, WindExtra.x, float3(0,0,0), WindExtra.y, WindExtra.z, LeafWindTrigOffset, WindType);
            }
                
            // move leaf back to anchor
            FinalPosition += Anchor;
        }

        if (WindType > SPEEDTREE_WIND_TYPE_FAST)
        {
            // branch wind (applies to all geometry)
            float2 VertBranchWind = Parameters.TexCoords[2];
            FinalPosition = BranchWind(STData, FinalPosition, TreePos, float4(VertBranchWind, 0, 0), WindType);
        }    
    }

    // global wind can apply to the whole tree, even billboards
    if (WindType != SPEEDTREE_WIND_TYPE_NONE)
    {
        FinalPosition = GlobalWind(STData, FinalPosition, TreePos, true);
    }

    // convert into a world space offset
    return (FinalPosition - OriginalPosition) * TreeScale;
}

/** Vertex offset for SpeedTree wind and LOD */
float3 GetSpeedTreeVertexOffset(FMaterialVertexParameters Parameters, int GeometryType, int WindType, int LODType, float BillboardThreshold, bool bUsePreviousFrame) 
{
#if VF_SUPPORTS_SPEEDTREE_WIND
    if (bUsePreviousFrame)
    {
        return GetSpeedTreeVertexOffsetInner(Parameters, GeometryType, WindType, LODType, BillboardThreshold, GetPreviousSpeedTreeData());
    }
    return GetSpeedTreeVertexOffsetInner(Parameters, GeometryType, WindType, LODType, BillboardThreshold, GetCurrentSpeedTreeData());
#else
    return 0;
#endif
}

#endif

MaterialFloat2 GetLightmapUVs(FMaterialPixelParameters Parameters)
{
#if LIGHTMAP_UV_ACCESS
    return Parameters.LightmapUVs;
#else
    return MaterialFloat2(0,0);
#endif
}

#if USES_EYE_ADAPTATION
#include "EyeAdaptationCommon.usf"
#endif

#if POST_PROCESS_MATERIAL
// only Postprocess material bind PostprocessInput0, PostprocessInput0Size, PostprocessInput0MinMax ...
#include "PostProcessCommon.usf"            // PostprocessInput0
#endif

#if NEEDS_SCENE_TEXTURES
#include "DeferredShadingCommon.usf"        // GetGBufferData()

float4 GetPostProcessInputSize(uint Index)
{
#if POST_PROCESS_MATERIAL
         if (Index == 0)    return PostprocessInput0Size;
    else if (Index == 1)    return PostprocessInput1Size;
    else if (Index == 2)    return PostprocessInput2Size;
    else if (Index == 3)    return PostprocessInput3Size;
    else if (Index == 4)    return PostprocessInput4Size;
    else if (Index == 5)    return PostprocessInput5Size;
    else if (Index == 6)    return PostprocessInput6Size;
#endif
    return 1.0f;
}

float4 GetPostProcessInputMinMax(uint Index)
{
#if POST_PROCESS_MATERIAL
         if (Index == 0)    return PostprocessInput0MinMax;
    else if (Index == 1)    return PostprocessInput1MinMax;
    else if (Index == 2)    return PostprocessInput2MinMax;
    else if (Index == 3)    return PostprocessInput3MinMax;
    else if (Index == 4)    return PostprocessInput4MinMax;
    else if (Index == 5)    return PostprocessInput5MinMax;
    else if (Index == 6)    return PostprocessInput6MinMax;
#endif
    return 1.0f;
}

MaterialFloat4 MobileSceneTextureLookup(inout FMaterialPixelParameters Parameters, int SceneTextureId, float2 UV)
{
#if (FEATURE_LEVEL <= FEATURE_LEVEL_ES3_1)
    
    // For fetching SceneDepth and CustomDepth after tonemapper we need to switch OpenGL coordinates
    // SceneColor will be transformed to OpenGL coordinates during tonemapping
    #define NEEDTOSWITCHVERTICLEAXIS (COMPILER_GLSL_ES2 || COMPILER_GLSL_ES3_1) && (POST_PROCESS_MATERIAL && !POST_PROCESS_MATERIAL_BEFORE_TONEMAP)
    
    //PPI_SceneDepth
    if (SceneTextureId == 1)
    {
        #if NEEDTOSWITCHVERTICLEAXIS
        UV.y = 1.0 - UV.y; 
        #endif
        
        MaterialFloat Depth = ConvertFromDeviceZ(Texture2DSample(SceneDepthTexture, SceneDepthTextureSampler, UV).r);
        return MaterialFloat4(Depth.rrr, 0.f);
    }
    //PPI_CustomDepth
    else if (SceneTextureId == 13)
    {
        #if NEEDTOSWITCHVERTICLEAXIS
        UV.y = 1.0 - UV.y; 
        #endif

        MaterialFloat Depth = ConvertFromDeviceZ(Texture2DSample(CustomDepthTexture, CustomDepthTextureSampler, UV).r);
        return MaterialFloat4(Depth.rrr, 0.f);
    }
    // PPI_PostprocessInput
    else if (SceneTextureId == 14)
    {
#if POST_PROCESS_MATERIAL    
        MaterialFloat4 Input0 = Texture2DSample(PostprocessInput0, PostprocessInput0Sampler, UV);
        #if POST_PROCESS_MATERIAL_BEFORE_TONEMAP
        Input0 = Decode32BPPHDR(Input0);
        #endif
        // We need to preserve original SceneColor Alpha as it‘s used by tonemaper on mobile
        Parameters.BackupSceneColorAlpha = Input0.a;
        return Input0;
#endif// POST_PROCESS_MATERIAL    
    }
#endif// FEATURE_LEVEL

    return MaterialFloat4(0.0f, 0.0f, 0.0f, 0.0f);
}

/** Applies an offset to the scene texture lookup and decodes the HDR linear space color. */
float4 SceneTextureLookup(float2 UV, int SceneTextureIndex, bool bFiltered)
{
#if SCENE_TEXTURES_DISABLED
    return float4(0.0f, 0.0f, 0.0f, 0.0f);
#endif

    FScreenSpaceData ScreenSpaceData = GetScreenSpaceData(UV, false);

#if PS4_PROFILE
    // TODO: PS4 doesn‘t optimize out correctly the switch(), so it thinks it needs all the Samplers even if they get compiled out
    //    This will get fixed after launch per Sony...
         if (SceneTextureIndex == 0)    return float4(CalcSceneColor(UV), 0);
    else if (SceneTextureIndex == 1)    return ScreenSpaceData.GBuffer.Depth;
    else if (SceneTextureIndex == 2)    return float4(ScreenSpaceData.GBuffer.DiffuseColor, 0);
    else if (SceneTextureIndex == 3)    return float4(ScreenSpaceData.GBuffer.SpecularColor, 0);
    else if (SceneTextureIndex == 4)    return float4(ScreenSpaceData.GBuffer.CustomData.rgb, 0);
    else if (SceneTextureIndex == 5)    return float4(ScreenSpaceData.GBuffer.BaseColor, 0);
    else if (SceneTextureIndex == 6)    return ScreenSpaceData.GBuffer.Specular;
    else if (SceneTextureIndex == 7)    return ScreenSpaceData.GBuffer.Metallic;
    else if (SceneTextureIndex == 8)    return float4(ScreenSpaceData.GBuffer.WorldNormal, 0);
    else if (SceneTextureIndex == 9)    return 1; // todo
    else if (SceneTextureIndex == 10)    return ScreenSpaceData.GBuffer.CustomData.a;
    else if (SceneTextureIndex == 11)    return ScreenSpaceData.GBuffer.Roughness;
    else if (SceneTextureIndex == 12)    return ScreenSpaceData.GBuffer.GBufferAO;
    else if (SceneTextureIndex == 13)    return ScreenSpaceData.GBuffer.CustomDepth;
#if POST_PROCESS_MATERIAL
    else if (SceneTextureIndex == 14)    if (bFiltered) { return Texture2DSample(PostprocessInput0, BilinearTextureSampler0, UV);} else { return Texture2DSample(PostprocessInput0, PostprocessInput0Sampler, UV);} 
    else if (SceneTextureIndex == 15)    if (bFiltered) { return Texture2DSample(PostprocessInput1, BilinearTextureSampler0, UV);} else { return Texture2DSample(PostprocessInput1, PostprocessInput1Sampler, UV);} 
    else if (SceneTextureIndex == 16)    if (bFiltered) { return Texture2DSample(PostprocessInput2, BilinearTextureSampler0, UV);} else { return Texture2DSample(PostprocessInput2, PostprocessInput2Sampler, UV);} 
    else if (SceneTextureIndex == 17)    if (bFiltered) { return Texture2DSample(PostprocessInput3, BilinearTextureSampler0, UV);} else { return Texture2DSample(PostprocessInput3, PostprocessInput3Sampler, UV);} 
    else if (SceneTextureIndex == 18)    if (bFiltered) { return Texture2DSample(PostprocessInput4, BilinearTextureSampler0, UV);} else { return Texture2DSample(PostprocessInput4, PostprocessInput4Sampler, UV);} 
    else if (SceneTextureIndex == 19)    if (bFiltered) { return Texture2DSample(PostprocessInput5, BilinearTextureSampler0, UV);} else { return Texture2DSample(PostprocessInput5, PostprocessInput5Sampler, UV);} 
    else if (SceneTextureIndex == 20)    if (bFiltered) { return Texture2DSample(PostprocessInput6, BilinearTextureSampler0, UV);} else { return Texture2DSample(PostprocessInput6, PostprocessInput6Sampler, UV);} 
#endif // POST_PROCESS_MATERIAL
    else if (SceneTextureIndex == 21)    return 0; // material compiler will return an error
    else if (SceneTextureIndex == 22)    return float4(GetShadingModelColor(ScreenSpaceData.GBuffer.ShadingModelID), 1);
    else if (SceneTextureIndex == 23)    return ScreenSpaceData.AmbientOcclusion;
    else if (SceneTextureIndex == 24)    return ScreenSpaceData.GBuffer.CustomStencil;
    else if (SceneTextureIndex == 25)    return float4(ScreenSpaceData.GBuffer.StoredBaseColor, 0);
    else if (SceneTextureIndex == 26)    return float4(ScreenSpaceData.GBuffer.StoredSpecular.rrr, 0);
#else
    switch(SceneTextureIndex)
    {
        // order needs to match to ESceneTextureId

        // PPI_SceneColor
        case 0: return float4(CalcSceneColor(UV), 0);
        // PPI_SceneDepth
        case 1: return ScreenSpaceData.GBuffer.Depth;
        // PPI_DiffuseColor
        case 2: return float4(ScreenSpaceData.GBuffer.DiffuseColor, 0);
        // PPI_SpecularColor
        case 3: return float4(ScreenSpaceData.GBuffer.SpecularColor, 0);
        // PPI_SubsurfaceColor
        case 4: return IsSubsurfaceModel(ScreenSpaceData.GBuffer.ShadingModelID) ? float4( ExtractSubsurfaceColor(ScreenSpaceData.GBuffer), ScreenSpaceData.GBuffer.CustomData.a ) : ScreenSpaceData.GBuffer.CustomData;
        // PPI_BaseColor
        case 5: return float4(ScreenSpaceData.GBuffer.BaseColor, 0);
        // PPI_Specular
        case 6: return ScreenSpaceData.GBuffer.Specular;
        // PPI_Metallic
        case 7: return ScreenSpaceData.GBuffer.Metallic;
        // PPI_WorldNormal
        case 8: return float4(ScreenSpaceData.GBuffer.WorldNormal, 0);
        // PPI_SeparateTranslucency
        case 9: return float4(1, 1, 1, 1);    // todo
        // PPI_Opacity
        case 10: return ScreenSpaceData.GBuffer.CustomData.a;
        // PPI_Roughness
        case 11: return ScreenSpaceData.GBuffer.Roughness;
        // PPI_MaterialAO
        case 12: return ScreenSpaceData.GBuffer.GBufferAO;
        // PPI_CustomDepth
        case 13: return ScreenSpaceData.GBuffer.CustomDepth;
#if POST_PROCESS_MATERIAL
        // PPI_PostprocessInput0
        case 14: return Texture2DSample(PostprocessInput0, bFiltered ? BilinearTextureSampler0 : PostprocessInput0Sampler, UV);
        // PPI_PostprocessInput1
        case 15: return Texture2DSample(PostprocessInput1, bFiltered ? BilinearTextureSampler0 : PostprocessInput1Sampler, UV);
        // PPI_PostprocessInput2
        case 16: return Texture2DSample(PostprocessInput2, bFiltered ? BilinearTextureSampler0 : PostprocessInput2Sampler, UV);
        // PPI_PostprocessInput3
        case 17: return Texture2DSample(PostprocessInput3, bFiltered ? BilinearTextureSampler0 : PostprocessInput3Sampler, UV);
        // PPI_PostprocessInput4
        case 18: return Texture2DSample(PostprocessInput4, bFiltered ? BilinearTextureSampler0 : PostprocessInput4Sampler, UV);
        // PPI_PostprocessInput5
        case 19: return Texture2DSample(PostprocessInput5, bFiltered ? BilinearTextureSampler0 : PostprocessInput5Sampler, UV);
        // PPI_PostprocessInput6
        case 20: return Texture2DSample(PostprocessInput6, bFiltered ? BilinearTextureSampler0 : PostprocessInput6Sampler, UV);
#endif // __POST_PROCESS_COMMON__
        // PPI_DecalMask
        case 21: return 0;  // material compiler will return an error
        // PPI_ShadingModel
        case 22: return float4(GetShadingModelColor(ScreenSpaceData.GBuffer.ShadingModelID), 1);
        // PPI_AmbientOcclusion
        case 23: return ScreenSpaceData.AmbientOcclusion;
        // PPI_CustomStencil
        case 24: return ScreenSpaceData.GBuffer.CustomStencil;
        // PPI_StoredBaseColor
        case 25: return float4(ScreenSpaceData.GBuffer.StoredBaseColor, 0);
        // PPI_StoredSpecular
        case 26: return float4(ScreenSpaceData.GBuffer.StoredSpecular.rrr, 0);
        default:
            return float4(0, 0, 0, 0);
    }
#endif

#if PS4_PROFILE
    // PS4 as of SDK 930 can‘t figure out the switch statement exits through all code paths...
    return float4(0, 0, 0, 0);
#endif
}
#endif // NEEDS_SCENE_TEXTURES

// Uniform material expressions.


// can return in tangent space or world space (use MATERIAL_TANGENTSPACENORMAL)
half3 GetMaterialNormalRaw(FPixelMaterialInputs PixelMaterialInputs)
{
    return PixelMaterialInputs.Normal;
}

half3 GetMaterialNormal(FMaterialPixelParameters Parameters, FPixelMaterialInputs PixelMaterialInputs)
{
    half3 RetNormal;

    RetNormal = GetMaterialNormalRaw(PixelMaterialInputs);
        
    #if (USE_EDITOR_SHADERS && !(ES2_PROFILE || ES3_1_PROFILE || ESDEFERRED_PROFILE)) || MOBILE_EMULATION
    {
        // this feature is only needed for development/editor - we can compile it out for a shipping build (see r.CompileShadersForDevelopment cvar help)
        half3 OverrideNormal = View.NormalOverrideParameter.xyz;

        #if !MATERIAL_TANGENTSPACENORMAL
            OverrideNormal = Parameters.TangentToWorld[2] * (1 - View.NormalOverrideParameter.w);
        #endif

        RetNormal = RetNormal * View.NormalOverrideParameter.w + OverrideNormal;
    }
    #endif

    return RetNormal;
}

half3 GetMaterialEmissiveRaw(FPixelMaterialInputs PixelMaterialInputs)
{
    return PixelMaterialInputs.EmissiveColor;
}

half3 GetMaterialEmissive(FPixelMaterialInputs PixelMaterialInputs)
{
    half3 EmissiveColor = GetMaterialEmissiveRaw(PixelMaterialInputs);
#if !MATERIAL_ALLOW_NEGATIVE_EMISSIVECOLOR
    EmissiveColor = max(EmissiveColor, 0.0f);
#endif
    return EmissiveColor;
}

half3 GetMaterialEmissiveForCS(FMaterialPixelParameters Parameters)
{
return 0;
}

half3 GetMaterialBaseColorRaw(FPixelMaterialInputs PixelMaterialInputs)
{
    return PixelMaterialInputs.BaseColor;
}

half3 GetMaterialBaseColor(FPixelMaterialInputs PixelMaterialInputs)
{
    return saturate(GetMaterialBaseColorRaw(PixelMaterialInputs));
}

half GetMaterialMetallicRaw(FPixelMaterialInputs PixelMaterialInputs)
{
    return PixelMaterialInputs.Metallic;
}

half GetMaterialMetallic(FPixelMaterialInputs PixelMaterialInputs)
{
    return saturate(GetMaterialMetallicRaw(PixelMaterialInputs));
}

half GetMaterialSpecularRaw(FPixelMaterialInputs PixelMaterialInputs)
{
    return PixelMaterialInputs.Specular;
}

half GetMaterialSpecular(FPixelMaterialInputs PixelMaterialInputs)
{
    return saturate(GetMaterialSpecularRaw(PixelMaterialInputs));
}

half GetMaterialRoughnessRaw(FPixelMaterialInputs PixelMaterialInputs)
{
    return PixelMaterialInputs.Roughness;
}

half GetMaterialRoughness(FPixelMaterialInputs PixelMaterialInputs)
{
#if MATERIAL_FULLY_ROUGH
    return 1;
#endif
#if (ES2_PROFILE || ES3_1_PROFILE)
    // The smallest normalized value that can be represented in IEEE 754 (FP16) is 2^-14 = 6.1e-5.
    // The code will make the following computation involving roughness: 1.0 / Roughness^4.
    // Therefore to prevent division by zero on devices that do not support denormals, Roughness^4
    // must be >= 6.1e-5. We will clamp to 0.09 because 0.09^4 = 6.5e-5.
    //
    // Note that we also clamp to 1.0 to match the deferred renderer on PC where the roughness is 
    // stored in an 8-bit value and thus automatically clamped at 1.0.

    half Roughness = GetMaterialRoughnessRaw(PixelMaterialInputs);

    #if MOBILE_EMULATION
    {
        // this is only needed for mobile preview on PC
        Roughness = Roughness * View.RoughnessOverrideParameter.y + View.RoughnessOverrideParameter.x;
    }
    #endif

    // Increase value from 0.09 to 0.12 to fix missing specular lobe problem on device
    return clamp( Roughness, 0.12, 1.0 );
#else
    half Roughness = saturate(GetMaterialRoughnessRaw(PixelMaterialInputs));
    
    #if (USE_EDITOR_SHADERS && !ESDEFERRED_PROFILE)
    {
        // this feature is only needed for development/editor - we can compile it out for a shipping build (see r.CompileShadersForDevelopment cvar help)
        Roughness = Roughness * View.RoughnessOverrideParameter.y + View.RoughnessOverrideParameter.x;
    }
    #endif
    
    return Roughness;
#endif
}

half GetMaterialTranslucencyDirectionalLightingIntensity()
{
return 1.00000;
}

half GetMaterialTranslucentShadowDensityScale()
{
return 0.50000;
}

half GetMaterialTranslucentSelfShadowDensityScale()
{
return 2.00000;
}

half GetMaterialTranslucentSelfShadowSecondDensityScale()
{
return 10.00000;
}

half GetMaterialTranslucentSelfShadowSecondOpacity()
{
return 0.00000;
}

half GetMaterialTranslucentBackscatteringExponent()
{
return 30.00000;
}

half3 GetMaterialTranslucentMultipleScatteringExtinction()
{
return MaterialFloat3(1.00000, 0.83300, 0.58800);
}

// This is the clip value constant that is defined in the material (range 0..1)
// Use GetMaterialMask() to get the Material Mask combined with this.
half GetMaterialOpacityMaskClipValue()
{
return 0.33330;
}

// Should only be used by GetMaterialOpacity(), returns the unmodified value generated from the shader expressions of the opacity input.
// To compute the opacity depending on the material blending GetMaterialOpacity() should be called instead.
half GetMaterialOpacityRaw(FPixelMaterialInputs PixelMaterialInputs)
{
    return PixelMaterialInputs.Opacity;
}

#if MATERIALBLENDING_MASKED || (DECAL_BLEND_MODE == DECALBLENDMODEID_VOLUMETRIC)
// Returns the material mask value generated from the material expressions.
// Use GetMaterialMask() to get the value altered depending on the material blend mode.
half GetMaterialMaskInputRaw(FPixelMaterialInputs PixelMaterialInputs)
{
    return PixelMaterialInputs.OpacityMask;
}

// Returns the material mask value generated from the material expressions minus the used defined
// MaskClip value constant. If this value is <=0 the pixel should be killed.
half GetMaterialMask(FPixelMaterialInputs PixelMaterialInputs)
{
    return GetMaterialMaskInputRaw(PixelMaterialInputs) - GetMaterialOpacityMaskClipValue();
}
#endif

// Returns the material opacity depending on the material blend mode.
half GetMaterialOpacity(FPixelMaterialInputs PixelMaterialInputs)
{
    // Clamp to valid range to prevent negative colors from lerping
    return saturate(GetMaterialOpacityRaw(PixelMaterialInputs));
}

float3 GetMaterialWorldPositionOffset(FMaterialVertexParameters Parameters)
{
    #if USE_INSTANCING
        // skip if this instance is hidden
        if (Parameters.PerInstanceParams.z < 1.f)
        {
            return float3(0,0,0);
        }
    #endif
    return MaterialFloat3(0.00000000,0.00000000,0.00000000);;
}

float3 GetMaterialPreviousWorldPositionOffset(FMaterialVertexParameters Parameters)
{
    #if USE_INSTANCING
        // skip if this instance is hidden
        if (Parameters.PerInstanceParams.z < 1.f)
        {
            return float3(0,0,0);
        }
    #endif
    return MaterialFloat3(0.00000000,0.00000000,0.00000000);;
}

half3 GetMaterialWorldDisplacement(FMaterialTessellationParameters Parameters)
{
    return MaterialFloat3(0.00000000,0.00000000,0.00000000);;
}

half GetMaterialMaxDisplacement()
{
return 0.00000;
}

half GetMaterialTessellationMultiplier(FMaterialTessellationParameters Parameters)
{
    return 1.00000000;;
}

// .rgb:SubsurfaceColor, .a:SSProfileId in 0..1 range
half4 GetMaterialSubsurfaceDataRaw(FMaterialPixelParameters Parameters)
{
    return 0;;
}

half4 GetMaterialSubsurfaceData(FMaterialPixelParameters Parameters)
{
    half4 OutSubsurface = GetMaterialSubsurfaceDataRaw(Parameters);
    OutSubsurface.rgb = saturate(OutSubsurface.rgb);
    return OutSubsurface;
}

half GetMaterialCustomData0(FMaterialPixelParameters Parameters)
{
    return 1.00000000;;
}

half GetMaterialCustomData1(FMaterialPixelParameters Parameters)
{
    return 0.10000000;;
}

half GetMaterialAmbientOcclusionRaw(FPixelMaterialInputs PixelMaterialInputs)
{
    return PixelMaterialInputs.AmbientOcclusion;
}

half GetMaterialAmbientOcclusion(FPixelMaterialInputs PixelMaterialInputs)
{
    return saturate(GetMaterialAmbientOcclusionRaw(PixelMaterialInputs));
}

half2 GetMaterialRefraction(FPixelMaterialInputs PixelMaterialInputs)
{
    return PixelMaterialInputs.Refraction;
}

#if NUM_MATERIAL_TEXCOORDS
void GetMaterialCustomizedUVs(FMaterialVertexParameters Parameters, out float2 OutTexCoords[NUM_MATERIAL_TEXCOORDS])
{
    OutTexCoords[0] = Parameters.TexCoords[0].xy;

}
#endif

float GetMaterialPixelDepthOffset(FPixelMaterialInputs PixelMaterialInputs)
{
    return PixelMaterialInputs.PixelDepthOffset;
}

void CalcPixelMaterialInputs(in out FMaterialPixelParameters Parameters, in out FPixelMaterialInputs PixelMaterialInputs)
{
    // Initial calculations (required for Normal)

    // The Normal is a special case as it might have its own expressions and also be used to calculate other inputs, so perform the assignment here
    PixelMaterialInputs.Normal = MaterialFloat3(0.00000000,0.00000000,1.00000000);


    // Note that here MaterialNormal can be in world space or tangent space
    float3 MaterialNormal = GetMaterialNormal(Parameters, PixelMaterialInputs);

#if MATERIAL_TANGENTSPACENORMAL

#if SIMPLE_FORWARD_SHADING
    // Drop normal with simple forward shading for scalability
    MaterialNormal = float3(0, 0, 1);
#endif

    // flip the normal for backfaces being rendered with a two-sided material
    Parameters.TangentNormal = MaterialNormal * Parameters.TwoSidedSign;

#if FEATURE_LEVEL >= FEATURE_LEVEL_SM4
    // ES2 will rely on only the final normalize for performance
    Parameters.TangentNormal = normalize(Parameters.TangentNormal);
#endif

    // normalizing after the tangent space to world space conversion improves quality with sheared bases (UV layout to WS causes shrearing)
    // use full precision normalize to avoid overflows
    Parameters.WorldNormal = normalize(float3(TransformTangentVectorToWorld(Parameters.TangentToWorld, Parameters.TangentNormal)));
#else
    // Here we don‘t supoport two sided materials
    Parameters.TangentNormal = Parameters.WorldNormal = normalize(MaterialNormal);
#endif

    Parameters.ReflectionVector = ReflectionAboutCustomWorldNormal(Parameters, Parameters.WorldNormal, false);

#if !PARTICLE_SPRITE_FACTORY
    Parameters.Particle.MotionBlurFade = 1.0f;
#endif // !PARTICLE_SPRITE_FACTORY

    // Now the rest of the inputs
    MaterialFloat2 Local0 = (Parameters.TexCoords[0].xy * 1.00000000);
    MaterialFloat4 Local1 = ProcessMaterialColorTextureLookup(Texture2DSample(Material.Texture2D_0,Material.Texture2D_0Sampler,Local0));
    MaterialFloat4 Local2 = ProcessMaterialColorTextureLookup(Texture2DSample(Material.Texture2D_1,Material.Texture2D_1Sampler,Local0));
    MaterialFloat4 Local3 = ProcessMaterialColorTextureLookup(Texture2DSample(Material.Texture2D_2,Material.Texture2D_2Sampler,Local0));
    MaterialFloat3 Local4 = lerp(Local1.rgb,Local2.rgb,Local3.rgb);
    MaterialFloat Local5 = (View.GameTime * 0.25000000);
    MaterialFloat Local6 = (Local5 * 6.28318548);
    MaterialFloat Local7 = cos(Local6);
    MaterialFloat3 Local8 = lerp(MaterialFloat3(0.00000000,1.00000000,0.79365396),(MaterialFloat3(0.13119602,0.83164400,0.83999997) * 5.00000000),MaterialFloat(Local7));
    MaterialFloat3 Local9 = lerp(MaterialFloat3(0.00000000,0.00000000,0.00000000),Local8,Local3.rgb);
    MaterialFloat3 Local10 = (Local4 * Local9);
    MaterialFloat3 Local11 = (Local10 + Material.VectorExpressions[1].rgb);
    MaterialFloat3 Local12 = (Local4 * Material.VectorExpressions[2].rgb);

    PixelMaterialInputs.EmissiveColor = Local11;
    PixelMaterialInputs.Opacity = 1.00000000;
    PixelMaterialInputs.OpacityMask = 1.00000000;
    PixelMaterialInputs.BaseColor = Local12;
    PixelMaterialInputs.Metallic = 0.00000000;
    PixelMaterialInputs.Specular = 0.50000000;
    PixelMaterialInputs.Roughness = 0.50000000;
    PixelMaterialInputs.AmbientOcclusion = 1.00000000;
    PixelMaterialInputs.Refraction = 0;
    PixelMaterialInputs.PixelDepthOffset = 0.00000000;

}

// Programmatically set the line number after all the material inputs which have a variable number of line endings
// This allows shader error line numbers after this point to be the same regardless of which material is being compiled
#line 1588

void ClipLODTransition(float2 SvPosition, float DitherFactor)
{
    if (abs(DitherFactor) > .001)
    {
        float RandCos = cos(dot(floor(SvPosition.xy), float2(347.83451793,3343.28371963)));
        float RandomVal = frac(RandCos * 1000.0);
        half RetVal = (DitherFactor < 0.0) ?
            (DitherFactor + 1.0 > RandomVal) :
            (DitherFactor < RandomVal);
        clip(RetVal - .001);
    }
}

void ClipLODTransition(FMaterialPixelParameters Parameters, float DitherFactor)
{
    ClipLODTransition(Parameters.SvPosition.xy, DitherFactor);
}


#define REQUIRES_VF_ATTRIBUTES_FOR_CLIPPING (USE_INSTANCING && USE_DITHERED_LOD_TRANSITION)

#if USE_INSTANCING && USE_DITHERED_LOD_TRANSITION
void ClipLODTransition(FMaterialPixelParameters Parameters)
{
    ClipLODTransition(Parameters, Parameters.PerInstanceParams.w);
}
#elif USE_DITHERED_LOD_TRANSITION && !USE_STENCIL_LOD_DITHER
float NonInstancedDitherLODFactor;
void ClipLODTransition(FMaterialPixelParameters Parameters)
{
    if (NonInstancedDitherLODFactor != 0.0)
    {
        ClipLODTransition(Parameters, NonInstancedDitherLODFactor);
    }
}
void ClipLODTransition(float2 SvPosition)
{
    if (NonInstancedDitherLODFactor != 0.0)
    {
        ClipLODTransition(SvPosition, NonInstancedDitherLODFactor);
    }
}
#else
void ClipLODTransition(FMaterialPixelParameters Parameters)
{
}
void ClipLODTransition(float2 SvPosition)
{
}
#endif

void GetMaterialClippingShadowDepth(FMaterialPixelParameters Parameters, FPixelMaterialInputs PixelMaterialInputs)
{
    ClipLODTransition(Parameters);
    #if MATERIALBLENDING_MASKED
        clip(GetMaterialMask(PixelMaterialInputs)); 
    #elif MATERIALBLENDING_TRANSLUCENT
        clip(GetMaterialOpacity(PixelMaterialInputs) - 1.0f / 255.0f);
    #endif
}

void GetMaterialClippingVelocity(FMaterialPixelParameters Parameters, FPixelMaterialInputs PixelMaterialInputs)
{
    ClipLODTransition(Parameters);
    #if MATERIALBLENDING_MASKED && MATERIAL_DITHER_OPACITY_MASK
        clip(GetMaterialMaskInputRaw(PixelMaterialInputs) - 1.0f / 255.0f);
    #elif MATERIALBLENDING_MASKED
        clip(GetMaterialMask(PixelMaterialInputs)); 
    #elif MATERIALBLENDING_TRANSLUCENT
        clip(GetMaterialOpacity(PixelMaterialInputs) - 1.0f / 255.0f);
    #endif
}


void GetMaterialCoverageAndClipping(FMaterialPixelParameters Parameters, FPixelMaterialInputs PixelMaterialInputs)
{
    ClipLODTransition(Parameters);

#if MATERIALBLENDING_MASKED
    #if MATERIAL_DITHER_OPACITY_MASK
        /*
        5 value dither. Every value present in +
        012
        234
        401
        */
        //float Dither5 = ( ( (uint)Parameters.SvPosition.x + (uint)Parameters.SvPosition.y * 2 + (uint)View.TemporalAAParams.x ) % 5 ) / 5.0;
        float Dither5 = frac( ( Parameters.SvPosition.x + Parameters.SvPosition.y * 2 - 1.5 + View.TemporalAAParams.x ) / 5 );
        float Noise = frac( dot( float2( 171.0, 231.0 ) / 71, Parameters.SvPosition.xy ) );
        float Dither = ( Dither5 * 5 + Noise ) * (1.0 / 6.0) - 0.5;
        clip( GetMaterialMask(PixelMaterialInputs) + Dither );
    #else
        clip(GetMaterialMask(PixelMaterialInputs));
    #endif
#endif
}

    #define FrontFaceSemantic SV_IsFrontFace
    #define FIsFrontFace bool
    half GetFloatFacingSign(FIsFrontFace bIsFrontFace)
    {
        return bIsFrontFace ? +1 : -1;
    }

#if MATERIAL_TWOSIDED_SEPARATE_PASS
    #define OPTIONAL_IsFrontFace
    static const FIsFrontFace bIsFrontFace = 1;
#else
    #define OPTIONAL_IsFrontFace , in FIsFrontFace bIsFrontFace : FrontFaceSemantic
#endif

/** Initializes the subset of Parameters that was not set in GetMaterialPixelParameters. */
void CalcMaterialParametersEx(
    in out FMaterialPixelParameters Parameters,
    in out FPixelMaterialInputs PixelMaterialInputs,
    float4 SvPosition,
    float4 ScreenPosition,
    FIsFrontFace bIsFrontFace,
    float3 TranslatedWorldPosition,
    float3 TranslatedWorldPositionExcludingShaderOffsets)
{
    // Remove the pre view translation
    Parameters.WorldPosition_CamRelative = TranslatedWorldPosition.xyz;
    Parameters.AbsoluteWorldPosition = TranslatedWorldPosition.xyz - ResolvedView.PreViewTranslation.xyz;

    // If the material uses any non-offset world position expressions, calculate those parameters. If not, 
    // the variables will have been initialised to 0 earlier.
#if USE_WORLD_POSITION_EXCLUDING_SHADER_OFFSETS
    Parameters.WorldPosition_NoOffsets_CamRelative = TranslatedWorldPositionExcludingShaderOffsets;
    Parameters.WorldPosition_NoOffsets = TranslatedWorldPositionExcludingShaderOffsets - ResolvedView.PreViewTranslation.xyz;
#endif

    Parameters.SvPosition = SvPosition;
    Parameters.ScreenPosition = ScreenPosition;

#if COMPILER_GLSL_ES2 || COMPILER_GLSL_ES3_1
    // ES2 normalize isn‘t done accurately. This seems to fix it.
    // Originally this was normalize(normalize(TranslatedWorldPosition.xyz)) but tegra4 appears to optimize that out.
    Parameters.CameraVector = normalize(-0.01 * Parameters.WorldPosition_CamRelative.xyz);
#else
    // TranslatedWorldPosition is the world position translated to the camera position, which is just -CameraVector
    Parameters.CameraVector = normalize(-Parameters.WorldPosition_CamRelative.xyz);
#endif

    Parameters.LightVector = 0;

    Parameters.TwoSidedSign = 1.0f;

#if MATERIAL_TWOSIDED && HAS_PRIMITIVE_UNIFORM_BUFFER
    Parameters.TwoSidedSign *= View.CullingSign * Primitive.LocalToWorldDeterminantSign;

    #if !MATERIAL_TWOSIDED_SEPARATE_PASS
        Parameters.TwoSidedSign *= GetFloatFacingSign(bIsFrontFace);
    #endif
#endif

    // Now that we have all the pixel-related parameters setup, calculate the Material Input/Attributes and Normal
    CalcPixelMaterialInputs(Parameters, PixelMaterialInputs);
}

// convenience function to setup CalcMaterialParameters assuming we don‘t support TranslatedWorldPositionExcludingShaderOffsets
// @param SvPosition from SV_Position when rendering the view, for other projections e.g. shadowmaps this function cannot be used and you need to call CalcMaterialParametersEx()
void CalcMaterialParameters(
    in out FMaterialPixelParameters Parameters,
    in out FPixelMaterialInputs PixelMaterialInputs,
    float4 SvPosition,
    FIsFrontFace bIsFrontFace)
{
    float4 ScreenPosition = SvPositionToResolvedScreenPosition(SvPosition);
    float3 TranslatedWorldPosition = SvPositionToResolvedTranslatedWorld(SvPosition);

    CalcMaterialParametersEx(Parameters, PixelMaterialInputs, SvPosition, ScreenPosition, bIsFrontFace, TranslatedWorldPosition, TranslatedWorldPosition);
}

void CalcMaterialParametersPost(
    in out FMaterialPixelParameters Parameters,
    in out FPixelMaterialInputs PixelMaterialInputs,
    float4 SvPosition,
    FIsFrontFace bIsFrontFace)
{
    float4 ScreenPosition = SvPositionToScreenPosition(SvPosition);
    float3 TranslatedWorldPosition = SvPositionToTranslatedWorld(SvPosition);

    CalcMaterialParametersEx(Parameters, PixelMaterialInputs, SvPosition, ScreenPosition, bIsFrontFace, TranslatedWorldPosition, TranslatedWorldPosition);
}

/** Assemble the transform from tangent space into world space */
half3x3 AssembleTangentToWorld( half3 TangentToWorld0, half4 TangentToWorld2 )
{
    // Will not be orthonormal after interpolation. This perfectly matches xNormal.
    // Any mismatch with xNormal will cause distortions for baked normal maps.

    // Derive the third basis vector off of the other two.
    // Flip based on the determinant sign
    half3 TangentToWorld1 = cross(TangentToWorld2.xyz,TangentToWorld0) * TangentToWorld2.w;
    // Transform from tangent space to world space
    return half3x3(TangentToWorld0, TangentToWorld1, TangentToWorld2.xyz);
}

// Whether the material shader should output pixel depth offset
#define OUTPUT_PIXEL_DEPTH_OFFSET (WANT_PIXEL_DEPTH_OFFSET && (MATERIALBLENDING_SOLID || MATERIALBLENDING_MASKED) && !ES2_PROFILE)

// Whether to use the hidden d3d11 feature that supports depth writes with ZCull by only pushing into the screen
//@todo - use for other SM5 platforms
#define SUPPORTS_CONSERVATIVE_DEPTH_WRITES ((COMPILER_HLSL && FEATURE_LEVEL >= FEATURE_LEVEL_SM5) || (PS4_PROFILE))
#define USE_CONSERVATIVE_DEPTH_WRITES (OUTPUT_PIXEL_DEPTH_OFFSET && SUPPORTS_CONSERVATIVE_DEPTH_WRITES) 

#if USE_CONSERVATIVE_DEPTH_WRITES

#if COMPILER_HLSL
    // Note: for some reason using SV_DepthLessEqual without these interpolation modifiers causes a compile error in d3d
    #define INPUT_POSITION_QUALIFIERS linear noperspective centroid
    // Use conservative depth output so we still get Z Cull.  Note, this is a reversed Z depth surface.
    #define DEPTH_WRITE_SEMANTIC SV_DepthLessEqual
#elif PS4_PROFILE
    #define INPUT_POSITION_QUALIFIERS
    #define DEPTH_WRITE_SEMANTIC S_DEPTH_LE_OUTPUT
#else
    #error USE_CONSERVATIVE_DEPTH_WRITES enabled for unsupported platform
#endif

#else
    #define INPUT_POSITION_QUALIFIERS 
    #define DEPTH_WRITE_SEMANTIC SV_DEPTH
#endif

#if OUTPUT_PIXEL_DEPTH_OFFSET
    #define OPTIONAL_OutDepthConservative ,out float OutDepth : DEPTH_WRITE_SEMANTIC
    #define OPTIONAL_OutDepth ,out float OutDepth : SV_DEPTH
#else
    #define OPTIONAL_OutDepthConservative
    #define OPTIONAL_OutDepth
#endif

float ApplyPixelDepthOffsetToMaterialParameters(inout FMaterialPixelParameters MaterialParameters, FPixelMaterialInputs PixelMaterialInputs, out float OutDepth)
{
    // Can only push into the scene for conservative depth writes
    float PixelDepthOffset = max(GetMaterialPixelDepthOffset(PixelMaterialInputs), 0);

    // Update positions used for shading
    MaterialParameters.ScreenPosition.w += PixelDepthOffset;
    MaterialParameters.SvPosition.w = MaterialParameters.ScreenPosition.w;
    MaterialParameters.AbsoluteWorldPosition += MaterialParameters.CameraVector * PixelDepthOffset;

    OutDepth = MaterialParameters.ScreenPosition.z / MaterialParameters.ScreenPosition.w;

    return PixelDepthOffset;
}